Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Pembroke Park
Door installation in Pembroke Park carries a specific set of code requirements that most contractors working elsewhere in Broward County never think about. Every replacement door we hang here must carry Miami-Dade NOA or Florida Product Approval, because the town’s entire 1.6-square-mile footprint sits inside the High Velocity Hurricane Zone. That single fact shapes everything about the job: which products qualify, how the opening gets prepared, and what the work actually costs. We know those requirements cold, and we’ve been installing to them across Pembroke Park for years. Call (863) 208-6105 for a free estimate from a team that understands what this town’s homes actually need.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Door Installation Company
TruePane Windows & Doors was founded in 2008 by second-generation glazier Dale Kessler, and the company has served South Florida communities since 2008. The founding rule is still on the whiteboard: if the pane is not true, the job is not done. That standard applies to every door we set in Pembroke Park, whether it’s a standard entry door on a 1950s CBS ranch or a custom pivot door going into a full remodel.
Our crews work in Pembroke Park regularly. We know the housing stock here: single-story concrete block homes built between the mid-1950s and the 1970s, with masonry rough openings that were sized for the narrow jalousie and early aluminum frames of that era. We know what we’ll find behind the trim before we cut into it, and we price accordingly. That’s why our quotes hold up. We don’t discover surprises and then send a change order; we survey the opening, check the block condition, and put the price in writing before anything gets ordered.
Every job is covered by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. Our technicians are background-checked and uniformed. When you call, a live person answers, 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback form.
We also offer a permanent 5% discount for seniors and veterans. And our Door Installation team carries full manufacturer lines, side by side on paper, so you can see exactly what you’re buying before you commit.
Our Door Installation Services in Pembroke Park
Pembroke Park’s homes demand more from a door than just curb appeal. The salt-laden breeze off the Atlantic, the Everglades-driven rain squalls, and the HVHZ wind-load requirements all influence what gets spec’d and how it gets installed. Here’s what we handle most often.
Arched & Custom Doors
This is where TruePane earns its keep in Pembroke Park. Many homeowners here are finally converting the original jalousie entry doors into something that actually seals against wind-driven rain, and the right answer is often a custom arched or radius-top door built to the exact masonry opening. We work directly with your architect or designer, review the shop drawings before anything gets ordered, and keep the lead-time calendar transparent from the first meeting. The door’s production window, not our labor, sets the install date. We tell you that upfront, in writing.
Double & French Doors
Double French doors are a common upgrade on Pembroke Park ranches, particularly where a rear wall opens onto a patio. But the original rough opening on a 1960s home was often framed for a single jalousie unit, not a 60-inch or 72-inch double. Cutting block and building a proper header becomes part of the scope. We price that work honestly and handle it in-house, including the masonry repair if the block has gone soft from decades of moisture. The result is a true impact-rated French door with marine-grade hardware that doesn’t corrode in three seasons.
Pivot Doors
A pivot door is a statement piece, and we’ve installed them in Pembroke Park homes where the owner wants a full-height architectural entry. The engineering matters more than the aesthetics: a pivot door carries its weight on a floor and top pivot rather than traditional hinges, and in an HVHZ zone, the framing and anchoring must be engineered to hold a 150+ mph design wind load. We coordinate with the architect on drawings, spec the correct pivot hardware, and register both warranty layers in writing before the truck leaves.
Bifold & Folding Doors
Folding glass walls are increasingly popular in Pembroke Park, especially where a rear elevation opens to a pool or patio. These aren’t off-the-shelf installations. The track system must be perfectly level, the header must be engineered for the opening span, and the panels must interlock tightly enough to hold HVHZ wind loads when closed. We’ve done enough of these to know where the failures happen, and we build the opening to prevent them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
We’re an authorized installer for more than a dozen manufacturer lines, and for Pembroke Park work we typically quote side by side on paper so you can compare frame construction, glass packages, and warranty terms directly. Each brand has strengths: Marvin’s Ultimate line gives you architectural flexibility for custom openings, Milgard’s vinyl lines handle salt exposure well, and Jeld-Wen offers solid impact-rated options at a more moderate price point. We keep common parts and hardware in local stock so turnaround on service and adjustment calls in Pembroke Park is measured in days, not weeks.
Common Door Installation Problems We See in Pembroke Park Homes
- Corroded standard aluminum hardware. Sitting 3 to 4 miles inland from the Atlantic, Pembroke Park gets enough salt-laden wind to eat standard hinges and handles within a few hurricane seasons. West-facing doors catch the worst of it, combining salt air with Everglades-driven rain squalls and direct afternoon sun. Marine-grade hardware is not an upsell here; it’s the difference between a door that still operates in five years and one that binds and seizes.
- Jalousie rough openings that don’t fit modern doors. The original jalousie units in 1950s and 1960s Pembroke Park homes were set into masonry openings as narrow as 28 to 30 inches. Modern impact sliders and casements are wider, which means block cutting or a custom buck. Contractors who price from a catalog often discover this mid-job and either walk away or hand over a change order. We survey the opening first and include the masonry work in the original quote.
- Soft block from decades of moisture infiltration. Around those old jalousie openings, moisture has been getting into the block for 50 years. It’s not uncommon to find the concrete soft and crumbly once the old frame comes out. That means masonry repair before the new door can be set and flashed correctly. We plan for it, because we’ve seen it enough times in Pembroke Park to know it’s the rule, not the exception.
- Late-arriving custom glass and millwork. On higher-end jobs, the real schedule killer isn’t labor; it’s the door itself. A custom pivot door or an arched French unit might run four to eight weeks from drawing approval to delivery. If the shop drawings haven’t been signed off before ordering, the opening sits exposed through the HVHZ wind-load window while the energy bill climbs. We handle drawing review and signoff as part of our process, not as an afterthought.
Pricing for Door Installation in Pembroke Park, FL
A standard single entry door installation in Pembroke Park typically runs $1,800 to $3,400, including the door unit, hardware, and labor. An impact-rated French door in a standard 60-inch opening usually falls between $4,200 and $7,800, depending on the manufacturer line and whether the opening needs block work. Custom pivot doors are a different category entirely, starting around $8,000 and climbing to $15,000 or more when custom millwork and architectural glass enter the scope. The HVHZ code compliance isn’t optional and it’s already baked into these numbers; if a bid comes in dramatically lower than this, ask what product approval number the door carries and whether the opening survey is included.
We offer a free written repair estimate and a maintenance check for doors that need adjustment but not replacement. Call (863) 208-6105 and we’ll give you a written, line-item quote. Estimates are free, and the price is fixed before anything gets ordered.
We Also Serve Cities Near Pembroke Park
Our Door Installation in Pembroke Park crews work throughout the immediate area, including Pembroke Pines, Miramar, Weston, and Southwest Ranches. Each of these towns has its own code quirks and housing patterns, but the same HVHZ standards apply across the region, and we quote to them every day. Call for a free estimate wherever you are in the area.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Pembroke Park
Pembroke Park falls entirely within Broward County’s High Velocity Hurricane Zone, the same ultra-strict wind-load designation that covers Miami-Dade. That means every replacement door must carry Miami-Dade NOA or Florida Product Approval ratings engineered for 150+ mph design wind speeds. Hollywood and Miramar have pockets outside the HVHZ, so a contractor working there might not think to check. In Pembroke Park, there’s no leeway. Products without the right approval number won’t pass inspection, and your insurance company will notice. Call (863) 208-6105 and we’ll show you the approval documentation before you buy.
It adds time and scope, and any honest quote should say so upfront. The original jalousie units were set into masonry openings as narrow as 28 to 30 inches. A French door needs a 60-inch or wider rough opening, which means cutting block, building a proper header, and often repairing soft concrete around the old opening before the new door can be set and flashed. That’s usually a half-day to a full day of masonry work before our door crew starts. We plan for it in the quote and the schedule, so there’s no surprise change order mid-job. Call (863) 208-6105 to schedule a free opening survey.
The glass and the manufacturing, not our labor. A custom pivot door runs four to eight weeks from drawing approval to delivery, depending on the manufacturer and the glass package. The installation itself is typically one to two days once the door arrives. The mistake we see too often is a contractor who waits to order until the rough opening is cut, then the homeowner sits with an exposed opening through a hurricane season. We order as soon as your drawings are signed off, and we give you a written production calendar before anything is committed.
In most cases, yes. If the frame is intact, the hinges and hardware are sound, and the door carries a valid NOA or Florida Product Approval, we can replace the insulated glass unit without pulling the entire door. That saves money and keeps your opening sealed. What you can’t do is put a non-impact glass unit into an HVHZ-rated door; the replacement glass must carry the same approval as the original unit. We’ll verify the approval number and match the glass package accordingly. Call (863) 208-6105 and we’ll assess it on site.
Look at what’s on your existing door. If the hinges, handle set, or threshold show pitting, white oxidation, or rust staining, that’s salt corrosion at work, and standard hardware will do the same thing within a few seasons. Pembroke Park sits 3 to 4 miles inland, close enough for salt-laden Atlantic wind to reach every street in town. Marine-grade hardware costs more because it’s built to resist that environment. It’s only an upsell if a contractor can’t explain why the hardware matters; we show you the corrosion on your current hardware before we quote the upgrade.
If you’re planning a door installation in Pembroke Park, call (863) 208-6105 for a free estimate. We’ll survey your openings, talk through the code requirements, and put a fixed price in writing before anything gets ordered. You’ll get a straight answer from a company that’s been doing this work in South Florida since 2008, and a live person on the phone whenever you call.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Park and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.