Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Pembroke Park
If you live in Pembroke Park, your windows and doors are governed by one of the strictest wind codes in the country. Pembroke Park sits entirely inside Broward County’s High Velocity Hurricane Zone, the same 150+ mph design standard Miami-Dade enforces, and most of the town’s 1950s and 1960s ranch homes still carry original jalousie windows that were never built to meet it. That means the question most Pembroke Park homeowners face is not whether to upgrade, it is how to do it without paying twice. TruePane Windows & Doors has been answering that question for homeowners across Pembroke Park for years, and you can reach a live person at (863) 208-6105 any hour, any day.
Why TruePane Windows & Doors Is Pembroke Park’s Preferred Impact Windows & Doors Company
We are not a franchise rolling through Pembroke Park on a marketing schedule. TruePane was founded by second-generation glazier Dale Kessler in 2008, and our crews work this town the way a local company should. Dispatch and scheduling are coordinated from our South FL office in Miami, but the technicians who show up at your door know Pembroke Park’s housing stock, its code requirements, and its failure patterns. Here is what that means in practice: when we measure one of your original 28-30 inch jalousie openings, we already know the masonry around it has probably been absorbing moisture for fifty years. We price the block work before we start, not after we discover it.
Every TruePane job is covered by our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. We hire local, we train apprentices into journeymen, and we answer the phone 24 hours a day with a live person. No voicemail tree, no regional call center, no callback form. Pembroke Park homeowners have been burned by contractors who measured once, quoted catalog prices, and left them with a fogged seal and a bill that grew. We built this company so you do not have to go through that again.
Our Impact Windows & Doors Services in Pembroke Park
Pembroke Park’s homes need specific work done, not a generic window swap. Here are the services we perform most often in this town, and what each one actually involves.
Hurricane Impact Windows
The default job in Pembroke Park is full-opening replacement, because the original jalousie and narrow single-hung aluminum units on these 1950s-1970s CBS ranch homes are functionally non-compliant under current HVHZ code. We remove the old units, assess the masonry jambs behind them, and set fusion-welded impact casements, sliders, or single-hung windows with Miami-Dade NOA or Florida Product Approval ratings. Most openings on Pembroke Park’s original homes are 28-30 inches wide, so we frequently cut back deteriorated block, rebuild the rough opening with epoxy-set rebar, and waterproof the substrate before the new unit goes in. That is the difference between a window that lasts and one that leaks at the block interface within two seasons.
Impact Sliding Glass Doors
Many Pembroke Park ranch homes have a rear slider opening onto a patio or carport, and the original door was typically a non-impact aluminum frame that has been corroding for decades. Salt-laden air from the Atlantic, roughly three to four miles east, pits standard aluminum hardware within five to seven years. We replace those sliders with impact-rated units built around stainless steel rollers, reinforced interlocking stiles, and laminated glass that carries HVHZ product approval. The opening around an old Pembroke Park slider is often the first place moisture infiltrated the block, so we expect to repair the threshold and sill area before flashing the new door correctly.
Impact Entry & French Doors
Front entry doors on Pembroke Park’s mid-century concrete block homes were seldom built for wind pressure beyond a basic steel or wood frame. Upgrading to an impact-rated entry door or a set of French doors means anchoring into block that may be soft at the base from years of splash-back and afternoon thunderstorm-driven rain off the Everglades side. We check the jamb anchorage, replace deteriorated substrate, and install doors that are rated for HVHZ design pressures and fitted with marine-grade hardware. A square door in a true opening is not a luxury here. It is code and it is common sense.
Impact Garage Doors
Your garage door is the largest opening on most Pembroke Park homes, and it is the one most often left untouched after a window upgrade. An unbraced, non-impact garage door that fails during a storm lets wind pressure into the house from the inside, which is how roofs lift. We install braced impact garage doors and reinforce existing tracks and panels to meet current wind-load requirements. For Pembroke Park’s single-story homes, this is one of the highest-value upgrades you can make, both for structural safety and for the wind mitigation credits your insurer looks for.
We also handle hurricane shutters and protection, plus wind mitigation and code compliance documentation. If you are working through an insurance discount or a post-inspection correction, we provide the paperwork your carrier wants, filed correctly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Pembroke Park homes we regularly quote PGT, CGI, and ES Windows side by side on paper so you see exactly what you are buying. Each of these manufacturers carries Miami-Dade NOA and Florida Product Approval ratings suitable for HVHZ zones. We register both warranty layers, from the glass to the frame to the installation, before the crew leaves your driveway. If you already have impact units from a previous install that are failing, we service those too. We carry parts for the brands common in Pembroke Park and we do not make you wait on a distributor.
Common Impact Windows & Doors Problems We See in Pembroke Park Homes
- Corroded aluminum frames: Standard aluminum window and door frames pitted within five to seven years of Pembroke Park’s salt-laden Atlantic air. West-facing openings take the worst of it, hit by thunderstorm-driven rain from the Everglades side. Marine-grade hardware and anodized or vinyl-clad frames are the practical fix, not an optional upgrade.
- Seized or snapped jalousie hardware: The original jalousie windows on these older ranch homes were never designed for any impact rating. Under hurricane wind pressure, the sashes bend, the cranks seize, and the glass fails. Repairing them is money spent on a window that still will not pass a wind mitigation inspection.
- Leaks at the masonry block interface: Improperly flashed replacement windows on Pembroke Park homes let water weep into the soft block around the original 28-30 inch openings. We see this constantly on windows installed by catalog-priced contractors who never touched the substrate before setting the new unit.
- Underbid opening rework: Contractors who price by catalog sizes routinely underbid the block cutting and custom buck work these original masonry rough openings require. The homeowner signs for a window swap and discovers mid-job that the real scope is a half-day or full-day of masonry repair before any window can be set.
Pricing for Impact Windows & Doors in Pembroke Park, FL
Here are honest numbers for Pembroke Park’s market, based on the work we actually do here. A single impact window replacement on a standard 1950s-1970s CBS ranch opening typically runs $900-$1,600 per unit with NOA-rated glass, including basic flashing and sill repair. If the masonry jambs behind the old jalousie opening are soft and require block cutting and epoxy-set rebar rebuild, add $250-$600 per opening. A full-house impact window upgrade on a typical Pembroke Park ranch, fifteen to twenty openings, ranges $14,000-$28,000 depending on frame material and the amount of opening rework. Impact sliding glass doors run $2,800-$5,200 installed with stainless hardware. Impact entry doors range $2,200-$4,800. Impact garage doors run $2,500-$6,000 depending on size and whether the tracks need reinforcement.
You will see cheaper bids from crews running inland-spec hardware and skipping the block work. That bid costs more within a decade, and it often fails a wind mitigation inspection the first time it is checked. Call (863) 208-6105 for a free estimate. We quote line-by-line, in writing, and the price we quote is the price on the bill.
We Also Serve Cities Near Pembroke Park
Our crews work throughout southern Broward County. If you are in Pembroke Pines, Miramar, Weston, or Southwest Ranches, we handle impact windows and doors there as well, with the same Keystone Standard and the same no-paperwork-fight Done Right Promise. Learn more about our full Impact Windows & Doors services, or read more about Impact Windows & Doors in Pembroke Park.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Pembroke Park
You can, but the opening will still need work. The original jalousie openings on Pembroke Park’s 1950s-1970s CBS ranch homes were framed 28-30 inches wide, narrower than most modern impact casement or fixed units. To set a code-compliant impact window into that original rough opening, the block usually has to be cut wider, or custom bucks have to be built. Then there is the condition of the block itself. After fifty years of moisture weeping through unsealed jalousie sills, the masonry jambs are often soft and need epoxy-set rebar repair before any window is set. Call (863) 208-6105 and we will measure your actual openings and tell you what the rework will and will not require.
Plain aluminum hardware is a false economy in Pembroke Park. The town sits roughly three to four miles from the Atlantic, close enough that salt-laden wind steadily corrodes standard frames, rollers, and locks within five to seven years. West-facing openings take additional punishment from Everglades-driven storm rain. We specify marine-grade stainless hardware and anodized or vinyl-clad frames on every Pembroke Park install. It costs a little more up front and still looks square after a decade. Call (863) 208-6105 for a free estimate with materials clearly listed.
HVHZ requires every replacement window and exterior door in Pembroke Park to carry Miami-Dade NOA or Florida Product Approval ratings engineered for 150+ mph design wind speeds. That standard eliminates most of the products contractors routinely install elsewhere in Florida, including standard aluminum frames and non-impact glazing. You also need proper flashing at the block interface, and if you are claiming insurance discounts, the installer should provide wind mitigation documentation that matches the actual installed product. We handle the paperwork and register both warranty layers before we leave. Call (863) 208-6105 and ask for a copy of what your specific house needs.
In most cases, repairing an original non-impact aluminum single-hung from the 1960s means fixing a frame that will still fail a wind mitigation inspection and still will not meet current HVHZ code. You can replace the glass, pack the balances, and lubricate the tracks, and the window will still be a non-impact aluminum unit in an opening that needs masonry work. The money is better spent on a full replacement with a product that carries a NOA rating and fits the opening correctly after proper block preparation. For an honest assessment of whether your specific windows are worth repairing, call (863) 208-6105.
It is real, provided the installation is documented correctly. Florida insurance carriers offer wind mitigation credits for impact-rated openings that carry the proper product approvals and are installed per HVHZ code. The key is that the paperwork has to match the work. An installer who skips the opening rework or uses a product without the right NOA listing can leave you with windows that do not earn the discount. We provide the wind mitigation documentation your carrier wants, filed correctly, on letterhead they will accept. Call (863) 208-6105 and we will walk you through what your policy likely requires.
Contact TruePane Windows & Doors
If you live in Pembroke Park and you are tired of looking at windows that do not close square, frames that are pitted from salt air, or a garage door that flexes in a stiff wind, call us. A live person answers at (863) 208-6105, 24 hours a day, 7 days a week. We will schedule a free estimate, measure every opening twice, quote your options side by side on paper, and register both warranty layers before the truck leaves the driveway. That is the Keystone Standard, and it applies to every job we do in Pembroke Park.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Park with the Keystone Standard and the Done Right Promise.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.