Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom & Geometric Windows for Pembroke Pines Homeowners
Custom and geometric windows in Pembroke Pines give a home its signature. The arch over the entry, the trapezoid that follows a vaulted ceiling, the oversized picture window framing a lake view, these are the openings that turn a house into the one people slow down to look at. But they’re also the windows most likely to be measured wrong, ordered wrong, and installed out of true by crews that cut their teeth on rectangles. That’s the problem we fix at TruePane Windows & Doors, and we’ve been fixing it in South Florida since 2008 through a craft tradition that started with second-generation glazier Dale Kessler. If you need a custom shape built, replaced, or corrected in Pembroke Pines, call (863) 208-6105 and you’ll get a live person, not a voicemail tree.
What Our Custom & Geometric Windows Service Includes
Every custom window job starts with the opening, not the catalog. The opening dictates the engineering, the glass package, the frame reinforcement, and the install method. Here’s what we handle under the custom and geometric windows umbrella in Pembroke Pines.
Custom Impact Windows
Custom impact windows are code-rated laminated glass units built to a non-standard size or shape, engineered to hold up under the wind loads and flying debris South Florida building codes demand. When a homeowner in Pembroke Pines wants a 7-foot-tall arched transom or an octagon over the front door, it still has to meet Miami-Dade or Florida Building Code impact standards if the opening is part of the protected envelope. We order every custom impact unit through authorized manufacturer lines like PGT and CGI, register both warranty layers in writing before the truck leaves the driveway, and verify the NOA (Notice of Acceptance) matches the specific opening in your home, not just the product line in general.
Geometric & Shaped Windows
Geometric windows are fixed-frame units cut into shapes that aren’t rectangular: circles, half-rounds, triangles, trapezoids, pentagons, octagons, and the odd custom quadrilateral that follows a roofline. In Pembroke Pines, we see these most often in front elevations, stairwells, and great rooms where the builder wanted a focal point that pulls the eye up. TruePane measures every leg of the opening independently, because angles that look symmetrical rarely are. We order the unit to the exact degree of each corner, and we install with shim schedules that respect the geometry so the frame doesn’t rack over time.
Arched & Curved Windows
Arched windows run the range from a simple half-round over a standard sash to full eyebrow, cathedral, and Palladian configurations that curve in multiple planes. Curved glass is the most exacting category in window work: the radius has to match the wall, the frame has to be bent or segmented to follow it, and the glazing has to handle the stress concentrated at the crown. We’ve corrected plenty of arched installs in older Pembroke Pines homes where the original contractor jammed a flexible-frame unit into a radius that didn’t match, and the result was a binding sash and a fogged seal inside five years. We measure the true radius with a template, not a tape measure, and we spec the frame accordingly.
Oversized Openings
Oversized openings are window spans that exceed standard residential glass ratings, typically anything over 40 square feet or any single pane over 30 square feet in a wind-borne debris region. These are the lake-view walls in Chapel Trail, the two-story living room glazing in SilverLakes, and the modern great-room walls going into newer builds west of 75. Oversized units need structural mullions, tempered or laminated glass, and often a steel-reinforced frame. TruePane works directly with manufacturer engineering departments on these, because the load math is not something a field crew should be doing on a driveway. We get engineering sign-off, we stage the unit properly, and we set it with the equipment needed so the frame lands square the first time.
Here’s what you can expect with every custom or geometric window job we take on in Pembroke Pines:
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom & Geometric Windows
We’re an authorized installer for more than a dozen manufacturer lines, but three get called for custom and geometric work in Pembroke Pines more than any others: PGT, CGI, and Therma-Tru. Each has its strengths, and our job is to put the right brand in the right opening, not to sell you the one with the best rep trip.
PGT is the workhorse for custom impact in South Florida. Their WinGuard and custom division handle arched, radius, and oversized impact units that other manufacturers won’t quote under 12 weeks. We’ve installed hundreds of PGT custom units in Pembroke Pines, and we know their ordering system well enough to catch a frame-clip mismatch before the unit goes into production, not after it arrives on the job site. CGI is the brand we lean on for heavy-lite impact windows and large-opening partitions, especially where the homeowner wants a thin sightline and a stronger laminated interlayer. Their custom division is responsive on shop drawings, and we’ve had good luck getting revised quotes back fast when a Pembroke Pines homeowner changes a radius mid-stream. Therma-Tru is primarily a door line, but we mention them because a lot of our custom geometric window work in Pembroke Pines ties into entry systems: a half-round transom over a Therma-Tru door, or a tall side-lite configure that has to match the door’s cam and hinge geometry. We handle the window side of those jobs with the same attention to fit and finish as the door itself.
Whether you have PGT, CGI, Therma-Tru, or any other make, we can help. If the brand is one we don’t carry, we’ll still measure, diagnose, and in many cases repair or re-glaze the unit. A TruePane tech will tell you honestly if a manufacturer line is worth reordering or if you should look at a different brand for the replacement.
Signs You Need Custom & Geometric Windows Right Now
Most custom and geometric window failures announce themselves slowly. Here are the warning signs Pembroke Pines homeowners should not wait on.
- Fogging or moisture between the panes. This means the seal on the insulated glass unit has failed. On a rectangle, that’s a straightforward replacement. On an arch or trapezoid, the IGU has to be re-glazed to the exact angles of the opening. Wait too long and the aluminum or wood frame starts to absorb moisture, which turns a $1,200 glass replacement into a $6,000 full-frame rebuild.
- The sash binds when you open or close it. On a geometric window, binding usually means the frame has shifted out of square. That can come from a poor original install, a settling slab, or a hurricane-tie failure. A binding sash on an arched or angled window isn’t a lubrication problem; it’s a geometry problem, and it won’t fix itself.
- Visible daylight or drafts around the frame. Custom window openings are cut to follow rooflines and architectural features, which means the rough opening is rarely perfectly plumb. If you can see light or feel air moving around the casing, the flashing or sealant has failed and water is already finding its way into the wall cavity. In Pembroke Pines, where afternoon thunderstorms hit hard from May through October, that’s a mold and rot issue waiting to happen.
- Cracks in the drywall corners radiating from the window. This is a structural warning. An oversized or geometric unit carries a bigger load on the header and jamb studs than a standard double-hung. Hairline cracks that start at the top corner of an arch or the point of a trapezoid and grow over a few months mean the framing around the opening is deflecting. That’s not a caulk job; that’s a re-frame, and the sooner it’s addressed, the less it costs.
- Your custom window is older and has no impact rating. If the custom arch over your entry was installed before 2002, there’s a good chance it’s a standard annealed unit, not impact-rated. In Pembroke Pines, that means one well-aimed branch during a storm and you have a breach. The building code doesn’t force you to upgrade until you replace, but if the window is already failing or you’re doing adjacent work, it’s the right time to bring the opening up to current impact standards.
Our Custom & Geometric Windows Process - Step by Step
Here’s how a TruePane custom window job goes from first call to final walkthrough in Pembroke Pines.
- 1
Call and talk to a person. When you call (863) 208-6105, a live person answers. We ask about the opening, the symptoms, and the house. That first call usually takes ten minutes, and by the end of it you’ll know whether you need a site visit or whether we can ballpark it over the phone.
- 2
In-home measurement and quote. A background-checked, uniformed technician comes to your Pembroke Pines home at the scheduled time. For geometric and arched windows, we don’t measure with a tape and call it done. We use a digital angle finder on every corner and a template for the radius, because half a degree of slop on a 6-foot arch turns into a 3/8-inch gap at the crown. Then we quote manufacturer lines side by side on paper, so you see exactly what each option costs.
- 3
Engineering and order. For oversized and impact-rated custom units, we submit the measurements to the manufacturer’s engineering department and wait for shop drawings. We review those drawings against our field measurements before the unit goes into production. That’s the step most companies skip, and it’s the step that catches the mistakes that turn into six-week delays and re-stocking fees.
- 4
Installation. On install day, the same standard applies: the opening is prepped, the flashing and sealant are done to manufacturer spec, and the unit is set with the frame shimmed to true, not to the drywall. We register both warranty layers in writing before the truck leaves the driveway. Most custom window replacements are done in a single visit.
- 5
The Done Right Promise. If anything about the install isn’t right within 90 days, we come back and make it right. No paperwork fights, no arguing. That promise is in writing, and it’s backed by a company that’s been serving South Florida since 2008 and plans to be here in thirty more.
How Much Does Custom & Geometric Windows Cost in Pembroke Pines?
A custom or geometric window in Pembroke Pines typically runs between $1,800 and $8,500 per opening, depending on the shape, size, glass package, and whether impact rating is required. A straightforward fixed half-round over a door might land in the $1,800 to $3,200 range. A large trapezoid or angled unit with impact glass and a structural frame typically runs $3,500 to $6,500. An oversized picture or corner window with laminated impact glass, steel reinforcement, and engineering review can push past $8,500, and two-story or curved-glass work goes higher still.
What moves the price: shape complexity, glass area, impact versus non-impact, frame material (vinyl, aluminum, wood-clad), and whether the existing rough opening is square or needs reframing. In Pembroke Pines specifically, homes built in the 1980s and 1990s, like much of the original Pines Village, SilverLakes, and Chapel Trail inventory, often have rough openings that settled out of square, so reframing is more common than homeowners expect.
How to avoid overpaying: get a written, line-item quote that breaks out the unit cost, the install labor, and any reframing or structural work. If a contractor gives you one number with no breakdown, you can’t tell what you’re paying for. TruePane quotes manufacturer lines side by side on paper, and the price on the quote is the price on the bill. Our estimates are free, and a senior or veteran discount of 5% applies permanently. Call (863) 208-6105 to schedule your free estimate with no obligation.
Custom & Geometric Windows Near Pembroke Pines - Our Service Area
We install custom and geometric windows throughout Pembroke Pines and the surrounding communities. Most of our custom window work comes from Pembroke Pines itself, but we serve homeowners regularly in Miramar, Weston, Southwest Ranches, Cooper City, Davie, and Country Club. We also take custom window jobs in Miami Gardens, Hialeah Gardens, and Miami Lakes for homeowners who want a crew that measures twice and registers warranties in writing. Response times vary by schedule, but most in-home estimates in Pembroke Pines can be set within a few days. Call (863) 208-6105 and a live person will get you on the schedule.
Serving Pembroke Pines, FL - Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom & Geometric Windows in Pembroke Pines
A custom or geometric window is any fixed or operable window built to a non-standard size, shape, or angle. In Pembroke Pines, the most common geometric windows are arches, half-rounds, trapezoids, octagons, and angled units that follow vaulted ceilings or rooflines. A custom window could also be a standard rectangle in an unusual size, but the term usually applies to shapes that can’t be pulled off a shelf at a supply house.
From measurement to install, most custom and geometric window replacements in Pembroke Pines take 3 to 8 weeks. The biggest variable is manufacturer lead time on custom glass packs, which currently runs 4 to 10 weeks for most brands. On our end, the measurement, engineering review, and install are usually a matter of days, not weeks. Call (863) 208-6105 for a current lead time on the specific window you need.
A custom geometric window in Pembroke Pines typically runs $1,800 to $8,500 per opening, with most mid-size arched or trapezoid units landing between $3,500 and $6,500. The price depends on shape, size, glass package, impact rating, and whether the rough opening needs reframing. TruePane provides a written, line-item quote after the in-home measurement, and the estimate is free.
Yes. TruePane is an authorized installer for PGT, CGI, Therma-Tru, and more than a dozen other manufacturer lines, and we work on custom and geometric units from every major brand on the market. If you have a PGT impact arch or a CGI custom-lite window that’s failing, we can diagnose it, re-glaze it, or reorder it through the manufacturer. We’ll also tell you honestly if a different brand makes more sense for the replacement.
A live person answers our phone 24 hours a day, 7 days a week, including nights, weekends, and holidays. If a custom window is breached or the glass is cracked and the home is exposed, we’ll get someone out to board and secure the opening. For non-emergencies, we schedule the in-home measurement at the next available slot. Call (863) 208-6105 any time, and you’ll talk to a real person.
Every custom window we install is covered by The Keystone Standard: both manufacturer warranty layers registered in writing, with the durations stated, before the truck leaves the driveway. On top of that, our Done Right Promise covers the workmanship. If the install isn’t right within 90 days, we make it right, with no paperwork fights and no arguing.
Clear the area in front of and around the window so the technician can access the full opening, inside and out. If the window is behind furniture or landscaping, move what you can; our techs will handle ladders and light clearing on the exterior. Draw a rough sketch of the window and note any symptoms you’ve seen, fogging, drafts, binding, so the technician can focus the diagnostics on what you’re actually experiencing.
Schedule Your Custom & Geometric Windows Service in Pembroke Pines Today
If you have a custom or geometric window in Pembroke Pines that needs to be built, replaced, or corrected, call (863) 208-6105 and talk to a real person. We’ll schedule a free in-home estimate, measure the opening properly, and give you a written quote with no surprises and no pressure. We’ve served South Florida since 2008, and we plan to be here when you need us again. Back to home for more on what we do.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Pines since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.