Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Miramar
Window replacement in Miramar runs $800 to $2,800 per opening for standard impact-rated units, with full-frame tear-outs on the higher end and insert retrofits on the lower. Most jobs take one to two days once the permit clears, but in Miramar the real variable is rarely the labor. It’s the Architectural Review Committee sign-off and the Miami-Dade Notice of Acceptance paperwork. We know both cold. If you’re in Silver Lakes, Monarch Lakes, Nautica, or nearer to US-1, call (863) 208-6105 and we’ll walk you through what your specific home needs before you commit to anything.
Why TruePane Windows & Doors Is Miramar’s Preferred Window Replacement Company
TruePane was founded by second-generation glazier Dale Kessler in 2008, and our crews have been setting windows in Miramar homes long enough to know what the HOA board will flag before they even see the submittal. We’re not a franchise operation cycling through subcontractors. Our technicians are background-checked, uniformed, and trained as apprentices into journeymen, the old way.
Miramar homeowners tell us the same things on repeat: the last contractor showed up with windows that lacked a Broward NOA, or the finish didn’t match what the ARC had pre-approved, or nobody pulled the permit until the old windows were already out. That’s why we file the submittal packet ourselves, match color chips and spec sheets to the community standard before ordering anything, and register both Window Replacement warranty layers in writing before our truck leaves the driveway.
We also answer the phone. A live person picks up 24 hours a day, seven days a week, because that’s how a company behaves when it plans to still be in Miramar thirty years from now.
If the pane is not true, the job is not done. That’s the rule Dale keeps on the whiteboard, and it applies to every install we do, from a single insert in a 1960s ranch east of Douglas Road to a full-house replacement in Riviera Isles.
Our Window Replacement Services in Miramar
Full Frame Replacement
When the original frame is rotted, racked, or holding a failed seal, pulling the entire unit and setting a new frame is the only job that will last. In Miramar’s CBS construction, full frame replacement means cutting back stucco, replacing the buck, and flashing the sill pan so daily convective downpours don’t find a way behind the wall. This is where we see the most skipped steps from other crews, and where our Done Right Promise means we’ll come back and fix it without paperwork if something wasn’t right.

Insert Window Replacement
For Miramar homes built in the 1990s and 2000s with intact brick-mold or stucco openings, an insert retrofit costs less and goes faster. We measure every opening twice, then order the insert to fit the existing frame within an eighth of an inch. This matters in the HOA-governed communities like Silver Lakes and Monarch Lakes, where the exterior lines of the home can’t change without committee approval. Inserts keep the original sightlines and trim profiles, which keeps the ARC happy and the permit moving.

Storm Window Replacement
Miramar sits about 12 miles west of the Atlantic, and every window we install there carries a Miami-Dade or Broward Notice of Acceptance. Storm replacement here means impact-rated glazing, not a removable seasonal panel. Whether you’re after a laminated glass upgrade or full insulated impact units, we quote manufacturer lines side by side on paper so you can see exactly what you’re buying, what it costs, and what the warranty covers in writing.

Energy-Efficient Upgrade
Year-round humidity and a ten-month cooling season make energy-efficient windows in Miramar with low-E glazing and argon-filled double panes a hard dollar saver. Homes in the western I-75 corridor typically have 9-to-10-foot ceilings and oversized openings, which means more glass surface area and more solar gain per room. We spec low-SHGC glass for east- and west-facing walls and can show you the difference between a standard double pane and a true low-E impact unit, with the manufacturer’s performance numbers printed on the quote.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Miramar
We’re an authorized installer for more than a dozen manufacturer lines, and in Miramar we regularly set Andersen units. Jeld-Wen and PGT are also common requests. Because we order directly through manufacturer channels and keep a deep local parts inventory in our South Florida operation, turnaround on replacement sashes, hardware, and weatherstripping for Miramar customers runs days, not weeks. When you call for a quote, we’ll line up the brands that match your HOA’s approved spec sheet and show you the numbers on paper.
Common Window Replacement Problems We See in Miramar Homes
- Contractors showing up with non-compliant windows. Miramar sits entirely inside Broward County’s High-Velocity Hurricane Zone, so every unit must carry a Miami-Dade or Broward NOA. A window without that approval will get the permit rejected at City Hall, and the job stalls while the homeowner scrambles to find compliant units. We verify NOA numbers before anything gets ordered.
- HOA color mismatches triggering a stop-work order. Most of Miramar’s large master-planned communities require Architectural Review Committee sign-off before a permit can be pulled, and the committee compares submitted color chips and finish samples against the community’s pre-approved standard. The wrong white stops the job cold. We pull the community’s ARC guidelines before we ever submit.
- Poor sill pan flashing on original door thresholds. Miramar’s daily convective storms drive water hard, and a poorly lapped or missing sill pan behind a new door or window rots the jamb from the inside out. We see failed flashing jobs regularly in the older eastern corridors near US-1. We flash every opening to the manufacturer’s published detail, no shortcuts.
- Aluminum frame oxidation and seized hardware from constant humidity. The original single-pane aluminum windows in Miramar’s 1960s and 1970s homes corrode quickly in South Florida air. Cranks bind, weep holes clog, and the frame itself begins pitting. Once the thermal break has failed, tightening the operator won’t fix it. It’s a replacement call.
Pricing for Window Replacement in Miramar, FL
A standard insert window replacement in Miramar typically runs $800 to $1,400 per opening for an impact-rated vinyl or aluminum unit. Full-frame replacement on CBS construction runs $1,500 to $2,800 per opening, depending on stucco repair, interior trim, and whether the opening is standard or oversized. Energy-efficient low-E and argon packages add roughly $150 to $300 per window. If your home is in a gated community with ARC oversight, plan for no added cost on the window itself, but a real cost in the calendar: the review path usually adds two to six weeks before permits issue, depending on how clean the submittal is. We prepare that packet for you and file it with the management office so the wait is as short as it can be. Call (863) 208-6105 for a free estimate with line-item pricing. Written quote, no surprises on the bill.
We Also Serve Cities Near Miramar
Our crews run routes through Pembroke Pines, Weston, Southwest Ranches, and Cooper City every week, so if you have family or a rental property just outside Miramar, the same Window Replacement team can handle it. The ARC rules, the NOA requirements, and the building stock change from one city to the next, and we know which standard applies where.
Serving Miramar, FL - Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Miramar
Miramar requires a Miami-Dade or Broward County Notice of Acceptance on every replacement window or sliding and patio door, because the entire city sits within the High-Velocity Hurricane Zone. An impact-rated window without a current NOA for the exact model and size will not pass the city’s permit review. We verify NOA numbers before ordering and include the approval documents in the submittal packet. Call (863) 208-6105 for a free estimate on compliant products.
In Miramar, the ARC review typically adds two to six weeks to the calendar, depending on the community’s meeting schedule and how complete your submittal is. The packet needs color chips, finish samples, product spec sheets, and the NOA documentation for every unit. We prepare and file all of it so the clock runs from day one. Call (863) 208-6105 and we’ll pull your community’s ARC guidelines before we even quote.
Yes, any window you replace in Miramar must meet HVHZ impact standards, so the original single-pane aluminum from the 1990s and early 2000s gets replaced with impact-rated or impact-resistant units. There’s no grandfathering for new openings. The good news is that the same replacement can upgrade your energy performance at the same time. Call (863) 208-6105 for a side-by-side quote on compliant options.
Yes, we match the community’s pre-approved finish, profile, and color using the manufacturer’s full finish palette and the ARC’s published standard. We’ve matched Andersen white and Pella charcoal finishes in Silver Lakes, Monarch Lakes, and Nautica without a single stop-work order. Bring us the committee’s spec sheet and we’ll match it exactly, or pull it from the management office ourselves. Call (863) 208-6105 for a free match and estimate.
Miramar’s inland location means more intense daily convective thunderstorms than coastal Broward, and that repeated wind-driven wetting finds every small flashing gap, failed seal, or skipped sill pan quickly. Year-round humidity accelerates aluminum oxidation and vinyl glazing seal degradation faster than in drier markets. Proper threshold and sill pan flashing are the two biggest predictors of whether a Miramar install survives its first storm season. We flash every opening to manufacturer detail and stand behind it with our Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Miramar and South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After