Casement Windows

Casement Windows in Pembroke Pines, FL | TruePane Windows & Doors

Casement windows are side-hinged, crank-operated windows that open outward like a door. In Pembroke Pines, homeowners choose them for two reasons: the airtight compression seal that blocks wind-driven rain, and the full-width ventilation you get when the sash swings fully open. TruePane Windows & Doors has installed impact casements across Pembroke Pines for years, working with PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. We set every unit level, plumb, and square so the seal performs the way the manufacturer intended. Call (863) 208-6105 to talk about your project or schedule a free measurement.

Call (863) 208-6105

Product Overview - Casement Windows

Casement windows are the only operable window profile that uses a compression seal. When you close the crank, the sash presses firmly against the weatherstripping on all four sides. That’s a meaningful difference in South Florida, where afternoon thunderstorms hit sideways and the summer humidity never quits. The seal keeps air and water out far better than a sliding sash that just overlaps its frame.

Architecturally, casements suit a lot of Pembroke Pines homes. You’ll see them on mid-century ranch houses near University Drive, Mediterranean styles in Pembroke Falls, and newer builds in Westfork and Silver Lakes. They work especially well over kitchen sinks and in bathrooms, places where reaching a sliding sash is awkward but a crank handle makes opening easy. The sash swings outward, so nothing blocks the opening on the inside, and you get 100% of the frame area for airflow.

We offer casements in aluminum and vinyl. Aluminum is the default for impact-rated openings because of its strength-to-weight ratio and its long track record in coastal construction. Vinyl offers a warmer feel and excellent thermal performance, and many Pembroke Pines homeowners prefer it for bedrooms and living areas where the frame is exposed on the interior. Both materials hold up to the UV exposure, salt air, and humidity we deal with every day in Broward County.

The impact version of this window uses laminated glass with a PVB interlayer that holds the glass in the frame under impact. That’s the same technology used in automotive windshields. When a storm throws debris at the window, the glass may crack, but it stays in the sash instead of letting wind and water enter the home. The window remains sealed on the opening, which is the entire point of an HVHZ-rated impact product. Call (863) 208-6105 to see material samples and get line-item pricing.

Technical Specifications

• Frame materials: Aluminum, Vinyl. Aluminum is the traditional choice for impact openings in Pembroke Pines; vinyl offers a different look and thermal profile.
• Glass options: Laminated Impact Glass with PVB interlayer, Low-E Insulated Glass, Tinted Glass, Clear Glass.
• Finish options: White, Almond, Bronze, Black, Tan. These cover nearly every exterior palette in Pembroke Pines, from coastal whites to darker Mediterranean tones.
• Screen options: Fixed Screen, Retractable Screen. Retractable screens roll out of the way entirely when you want a clean, unobstructed view.
• Operation: Side-hinged sash, smooth crank operation, multi-point locking that pulls the sash tight against the perimeter seal.
• Design pressure: Matched to the wind zone of the specific opening, up to +/-100. We never spec a unit higher than what the opening actually needs.

Hurricane & Compliance Performance

Laminated Impact Glass - The glass is built as a sandwich: two panes with a PVB (polyvinyl butyral) interlayer between them. Under impact, the glass may fracture but the PVB layer holds the broken pieces attached to the sheet, keeping the opening sealed. The window stays in the sash, and the home stays protected.

Miami-Dade NOA / FL Product Approval - Every configuration carries a Miami-Dade Notice of Acceptance and a Florida Product Approval number. These are issued per configuration, not per product line, which means the specific size, frame material, and glass package on your quote has its own approval. We verify this for your exact configuration before ordering.

FBC / HVHZ Compliance - The units are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the strictest building code for wind and impact in the United States, and Pembroke Pines falls squarely inside it. Your permit package gets the right paperwork the first time.

TAS 201 / TAS 202 / TAS 203 Testing Context - These are the three test protocols that define HVHZ-rated products. TAS 201 is the large-missile impact test, firing a piece of lumber at the glass. TAS 202 is cyclic wind-pressure loading, simulating the push-pull of a hurricane’s gusts. TAS 203 is forced-entry resistance. Casements we install are tested under this protocol family.

Design Pressure for Your Wind Zone - We match the design pressure rating to your specific opening’s wind zone, up to +/-100, never higher. Over-specifying adds cost without adding safety; under-specifying is a code failure. TruePane Windows & Doors sizes each unit to the engineering requirements of that specific window in your home, not a one-size-fits-all rating.

Energy Performance with Low-E / Insulated Options - Low-E and insulated glass options are available for casements. The Low-E coating reflects heat while letting in visible light, which matters in July when the afternoon sun pounds the western elevation of your Pembroke Pines home. Insulated glass adds a second airspace that improves comfort near the window.

Color & Glass Options

Casements give you wide latitude on appearance. The finish options, White, Almond, Bronze, Black, and Tan, are chosen to work with the architectural vocabulary of South Florida. White and Almond read crisp and clean against stucco; they’re the most popular choices for ranch homes and newer builds in Pembroke Pines. Bronze and Black anchors a more modern look, especially paired with a black frame interior. Tan blends into beige and sand-colored stucco that’s common in Pembroke Falls and Chapel Trail.

Glass selection is about balancing light, heat, and protection. Clear laminated impact glass gives you the brightest view and the simplest look. Tinted glass cuts down glare and reduces heat gain through west-facing windows, which matters in the late-afternoon hours. Low-E insulated glass is the right choice if a room runs warm or if furniture fades near the window; it reflects heat while preserving the view. Every glass package we sell is laminated impact glass first. The Low-E and tint choices layer on top of that impact core.

Installation by TruePane Windows & Doors in Pembroke Pines

Even a perfect window performs poorly if it’s installed wrong. We see it often enough on replacement jobs in older Pembroke Pines neighborhoods: units that were set out of square, perimeter seals that were never properly foamed, water intrusion at the sill. An NOA-rated casement only works as a system when the frame is dead level, the sash seals compress evenly, and the perimeter is sealed correctly. That’s why our installation practice follows AAMA 2400 and 2410 standards for window installation, and we use AAMA 812 low-expansion foam around the perimeter of every unit.

Our process starts with a pre-install inspection of the rough opening. We check the framing for square, look for water damage or rot, and verify the opening size against the unit we’re installing. Then we set the frame level, plumb, and square, shimming where needed. The perimeter gets the low-expansion foam sealant, which fills the gap without bowing the frame. After the sashes are hung and the hardware is adjusted, we run a water test around the perimeter to confirm the seal. We clean the job site, haul away the old windows, and leave you with a finished opening.

Pembroke Pines has its own permitting process, and windows here must meet HVHZ requirements. We work with you or your contractor to make sure the NOA and Florida Product Approval paperwork for your specific configurations is available for permit submittal. If you live in a neighborhood with coastal exposure considerations or a community HOA that reviews exterior changes, we help you get the right approvals in place before install day. Call (863) 208-6105 to schedule your free on-site measurement.

Frequently Asked Questions - Casement Windows

What wind zone and design pressure is the casement window rated for? The design pressure is matched to the specific wind zone of each opening in your home, up to +/-100, never higher. We do not sell every home a blanket rating; we size each unit to what the engineering for that specific wall and exposure requires.

What is the lead time for casement windows in Pembroke Pines? Lead times vary by manufacturer (PGT, CGI, CWS, ES Windows, ECO, Mr-Glass) and by configuration. Custom sizes and less common color choices add time. We confirm current lead times for your exact spec when we present your quote, and we coordinate install date around delivery so your home isn’t left with open openings.

Does my permit require a Miami-Dade NOA or Florida Product Approval submittal? Yes, in Pembroke Pines, window permit applications require the NOA and Florida Product Approval documents for the exact configurations being installed. We provide the correct paperwork for your specific window sizes, frame materials, and glass packages so the permit process doesn’t stall.

Can I customize the size or configuration of my casement windows? Casements are typically custom-made to your opening size. That means you’re not limited to stock sizes; we measure each opening and order units that fit it precisely. You can also pair casements with fixed picture windows in the same line for larger openings, and choose your hardware finish and screen type.

How do I maintain the frame and hardware on a casement window? Keep the track and hinges clean, and wipe down the frame with mild soap and water a few times a year. The crank mechanism needs occasional lubrication. One thing particular to casements: don’t force the crank if the sash feels stiff, since that usually means the seal is misaligned. Call (863) 208-6105 and we’ll check the compression seal and realign the sash.

Get a Quote - Casement Windows in Pembroke Pines

Casement windows are a long-term decision for a Pembroke Pines home, and the quote should be specific, not a vague range. We measure every opening, spec the right design pressure for your wind zone, and give you line-item pricing per window. Call (863) 208-6105 to schedule your free on-site measurement, or to start a project conversation. We’ll walk you through material options, glass choices, and a realistic install timeline.

Written by the team at TruePane Windows & Doors, serving Pembroke Pines and South Florida with hurricane-impact window and door installation.