Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Repair in Pembroke Pines: What to Know First
We repair Therma-Tru roofing products in Pembroke Pines as an independent Therma-Tru service provider, not as a factory-authorized dealer. Most repairs are completed in one visit, and we quote firm line-item pricing before any work begins so you know the number before we touch the roof. Call (863) 208-6105 and a live person answers, day or night.
This page is for homeowners in Pembroke Pines who own a Therma-Tru product that’s leaking, lifting, or showing wear at the roofline and want a straight answer about what’s wrong and what it costs to fix. Dale Kessler grew up in the Pembroke Falls neighborhood and has spent decades setting and sealing openings in South Florida homes, so the advice here comes from time on ladders, not a call script.
How Therma-Tru Products Fail - and How We Fix Them
- Therma-Tru Classic-Craft and Fiber-Classic door frames pulling at the header. In Pembroke Pines, afternoon downpours drive water against the top of the frame, and once the sealant skin cracks, the frame wicks moisture and starts to rotate. We pull the top casing, inspect the header flashing, reset the frame with stainless fasteners, and reflash so the water sheds away from the opening instead of into it.
- Therma-Tru SlimLine and Smooth-Star transom and sidelite assemblies leaking at the roof junction. These units sit under shallow roof returns or porch overhangs, and water follows the gap between the roof sheathing and the frame. The fix is not caulk over caulk. We remove the old closure flashing, install a proper head flashing with end dams, and reseat the unit plumb before sealing.
- Therma-Tru patio door systems with worn top rollers and tracks. Pembroke Pines heat cycles expand aluminum tracks, and doors begin to drag, then jam, then the panel sags and leaves a gap at the top corner. We replace rollers with matching-profile parts, true the panel, and realign the interlock so the weatherstrip actually seals.
- Failed or improperly set factory flashing kits on Therma-Tru roof-adjacent openings. We regularly see installations where the factory sill pan or head flashing was shortened to make a rough opening work. That shortcut shows up as a stain on the interior drywall within two wet seasons. We correct it by stripping the unit, rebuilding the opening flashing to spec, and resetting the door or window.
- Therma-Tru impact-rated units with original factory weatherstripping gone flat. After a decade of Florida sun, the compression seals lose memory and the door or sash no longer closes tight. Water follows the gap. We source profile-matched weatherstripping, clean the milled grooves, and re-glaze where needed so the seal works under wind-driven rain.
One detail you won’t find on a manufacturer spec sheet: in Pembroke Pines, a Therma-Tru frame that shows a hairline crack at the top miter joint is rarely a material defect. It’s usually the header settling after original construction, and the fix is structural before it’s cosmetic.
Our Therma-Tru Roof Repair Process
- 1
You call (863) 208-6105. A live person answers, asks what you’re seeing, and gets your address. No voicemail tree.
- 2
We come out and inspect. A background-checked, uniformed technician looks at the opening from both sides - interior, exterior, and from the roof edge when needed. We measure twice, the way Dale learned at McFatter Technical College.
- 3
We write the quote on paper. Firm line items, no allowances, no “to be determined.” If we can fix it with OEM parts, we use them. If a quality aftermarket part matches or exceeds the original profile, we say so and you choose.
- 4
We do the repair. The frame gets reset or reflashed, parts go in, and everything is sealed and tested. We lay tarps, bag debris, and leave the roofline cleaner than we found it.
- 5
We test with water. After every repair we run a controlled water test on the repaired area to confirm it sheds water the way it should. If it doesn’t, we redo it before we call the job done.
- 6
We register the work and hand you the paper. Under The Keystone Standard, every warranty layer is stated in writing, and our Done Right Promise covers the work. If it is not in writing, it is not a guarantee - it is a guess.
What Therma-Tru Roof Repair Costs in Pembroke Pines
Most Therma-Tru repairs in Pembroke Pines land between $275 and $950 depending on what actually failed. Here’s the honest breakdown:
- Frame reseal and reflash at a single opening: $275-$475
- Roller or track replacement on a patio door: $225-$500
- Weatherstripping replacement, full door perimeter: $180-$375
- Header or frame reset with structural correction: $500-$950
- Factory flashing kit rebuild on a roof-adjacent opening: $400-$850
What moves the number is access (second-story work costs more than ground-level), the condition of the rough opening, and whether the original flashing was ever done right. We charge for the repair, not for a sales pitch. Call (863) 208-6105 for a free estimate, and we’ll put the number in writing before you decide anything.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve served Pembroke Pines and western Broward County for years as an independent shop that stands behind what we set. The Done Right Promise means if the repair isn’t right, we come back and make it right - no paperwork, no arguing. A live person answers the phone 24/7, and the technician who shows up is background-checked, uniformed, and trained on Therma-Tru profiles as well as PGT, CGI, CWS, and ES Windows. That matters because most Pembroke Pines homes have a mix of brands, and we can fix the whole roofline in one trip. Dale Kessler built TruePane on a simple rule: if the pane is not true, the job is not done. That applies to every Therma-Tru door frame and roof-adjacent opening we touch.
FAQs
Therma-Tru’s written warranty covers manufacturing defects in the door slab, frame, and components for the stated term, but it generally does not cover installation errors, flashing failures, or water intrusion caused by how the unit was set. That’s the gap we close. We repair the installation, and we put our own Done Right Promise on the work in writing. Call (863) 208-6105 for an honest assessment of what your warranty actually covers.
We use OEM Therma-Tru parts when they’re available and correct for your unit, and we use profile-matched aftermarket parts when they match or exceed the original spec. You’ll see both options on the written quote before we order anything. Call (863) 208-6105 for a free estimate with parts spelled out.
If the rot is limited to the outer casing and the frame itself is sound, repair makes sense. If the frame’s structural core is compromised, we’ll tell you honestly that replacement is the better long-term call. We won’t sell you a repair that won’t hold. Call (863) 208-6105 and we’ll inspect it and give you a straight answer.
We answer the phone 24/7 and schedule by urgency. A leaking opening at the roofline gets priority because water in the wall cavity compounds the damage every week it’s left alone. Call (863) 208-6105 and a live person will get you on the schedule.
Most repair work on existing openings doesn’t require a permit in Pembroke Pines, but when structural correction or re-flashing crosses into scope that does, we pull the permit and handle the inspection. You’ll see permit line items on the written quote when they apply. Call (863) 208-6105 for a free estimate on your specific job.
If your Therma-Tru product is leaking at the roof, lifting at the header, or just not closing the way it should, call (863) 208-6105. We’ll come out, tell you what’s actually wrong, and put the fix in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.