Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Energy-Efficient Windows in Pembroke Pines: What to Know First
We’re an independent Mr-Glass service provider in Pembroke Pines, and we repair and replace Mr-Glass energy-efficient windows most weeks. A typical service call runs $180-$340 for a single-sash repair, while a full replacement with ENERGY STAR-rated glass usually lands between $700 and $1,400 per window, depending on size and frame condition. We quote it on paper before any work starts, and most jobs finish in one visit.
This page is for Pembroke Pines homeowners who own Mr-Glass windows and have questions about fogged glass, failed seals, drafts, or whether the energy savings are real. If that’s you, call (863) 208-6105 and a live person answers, day or night.
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass windows, like every brand, have patterns. We see the same handful of failure modes across Pembroke Pines neighborhoods, from Pembroke Falls to SilverLakes, and we fix them the same way each time: diagnose the actual cause, not the symptom.
- Seal failure in Mr-Glass dual-pane units. South Florida humidity works its way into the spacer between the panes, and the desiccant eventually saturates. You’ll notice condensation or haze between the glass that won’t wipe off. The glass itself is fine, but the insulated unit is dead. We replace the IGU (insulated glass unit) with new low-E glass matched to the original Mr-Glass dimensions, and we check the frame seal before we set the new pane.
- Low-E coating degradation on west-facing windows. In Pembroke Pines, afternoon sun is relentless. Mr-Glass windows on the west side of the house, especially larger fixed units, can show a subtle mottling or haze in the low-E coating after fifteen or more years of direct exposure. It’s not the homeowner’s fault and it’s not a cleaning issue. When the coating breaks down, the glass stops reflecting heat the way it should, and the fix is replacement glass, not a repair.
- Argon gas leakage in Mr-Glass insulated units. Argon is a colorless, odorless gas that boosts insulation between the panes. Over time, seal micro-fractures let it escape. The window won’t look any different, but the room starts feeling warmer in August and the glass surface temperature climbs. If you have a Mr-Glass unit that’s five to ten years old and the AC bill has crept up, this is worth checking. We can test the unit and replace it if the gas is gone.
- Frame seal breakdown on Mr-Glass horizontal sliders. The bottom track on a Mr-Glass slider takes standing water during Pembroke Pines’s summer storms. Over the years, the weatherstripping compresses or the frame corners work loose, and you’ll feel a draft or hear wind on stormy nights. We clean and re-seat the track, replace the weatherstripping, and realign the sash so it closes square.
- Sticking or binding sashes after years of Florida humidity. Mr-Glass sashes, particularly in older lines, can swell or shift as the frame ages. The window becomes hard to open, which is a safety concern and an energy leak when it won’t close fully. We don’t force the sash. We check the frame for true, adjust the hardware, and reset the panel so it seats properly.
Our Mr-Glass Energy-Efficient Windows Process
Every Mr-Glass job follows the same path, and we don’t skip steps. Here’s what happens when you call.
- 1
We measure every opening twice. A Mr-Glass window that’s out of square by even a quarter inch will bind or leak. We measure the opening, not the old glass, because glass gets cut to the frame, not the other way around.
- 2
We identify the exact Mr-Glass line and glass package. Not all Mr-Glass glass is the same. We check the window’s markings and the size of the insulated unit so we match the right low-E coating and gas fill.
- 3
We give you the parts decision on paper. For older Mr-Glass windows, OEM glass may be available, but a quality aftermarket IGU often saves money with equal or better energy performance. We quote both options side by side so you see exactly what you’re buying.
- 4
We replace or repair the unit. The old sash comes out, the new sealed glass unit gets set, and the frame is cleaned and re-seated before anything goes back in.
- 5
We test the window for draft, alignment, and function. Open, close, check the seal, check for daylight around the frame. If it doesn’t pass, we fix it before we leave.
- 6
We register both warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard. If it is not in writing, it is not a guarantee - it is a guess.
What Mr-Glass Energy-Efficient Windows Costs in Pembroke Pines
The price drivers on a Mr-Glass job are size, glass package, and whether the frame is still sound. Here’s what we typically see in Pembroke Pines.
| Scenario | Typical Range |
|---|---|
| Repair a fogged Mr-Glass IGU (single sash, standard size) | $180 - $340 |
| Replace a Mr-Glass slider with isolated low-E glass | $650 - $1,100 |
| Full Mr-Glass replacement with ENERGY STAR-rated glass (per window) | $700 - $1,400 |
| Upgrade to insulated laminated glass (impact-rated, larger fixed unit) | $1,200 - $2,200 |
Light tint or solar-glass options add $60 to $180 per window, depending on the glass type. What moves the price most is the size of the unit and whether the frame can be saved. If the frame is out of true, replacing just the glass is throwing good money after bad, and we’ll tell you that before we take the job. Call (863) 208-6105 for an exact quote. Estimates are free, and the number on the paper is the number on the bill.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We’re not a franchise operation. Dale Kessler grew up in the Pembroke Falls neighborhood of Pembroke Pines and learned his fundamentals at McFatter Technical College in Davie, where an old glazier drilled one rule into every student: a window is only as good as the frame that holds it. That’s why we measure twice, set glass true, and don’t call a job done until the sash closes like it should.
Every Mr-Glass job is covered by our Done Right Promise. If it’s not right, we make it right - no paperwork fights, no arguing. We also handle PGT, CGI, CWS, and ES Windows, so if you’re comparing replacement options, we can quote multiple lines side by side on paper and let you decide. Our techs are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. A live person answers the phone 24 hours a day, seven days a week, and we show up when we say we will.
FAQs
As an independent Mr-Glass service provider, we’re not the manufacturer, so we can’t file a warranty claim on your behalf. What we can do is tell you honestly whether your window’s problem looks like a warranty issue, and we’ll register both manufacturer warranty layers in writing on the work we do so your coverage is documented. Call (863) 208-6105 and we’ll talk through what you’ve got.
A fogged Mr-Glass insulated glass unit on a standard-sized sash typically runs $180 to $340 in Pembroke Pines. Larger fixed windows or units requiring new low-E glass can run higher. Call (863) 208-6105 and we’ll give you an exact number before any work begins.
Yes. For older Mr-Glass windows, OEM parts can be slow to source and cost more than the glass itself is worth. A quality aftermarket insulated glass unit with a comparable low-E coating and argon fill often performs as well or better for less money. We’ll quote both and let you choose.
If the sash is square, the hardware works, and only the glass unit has failed, repair is usually the right call. If the frame corners have opened up, the track is worn, or the window binds even with new weatherstripping, replacement is cheaper in the long run than nursing a failing frame. We’ll tell you which one applies to your window before we quote anything.
Ready to Get Your Mr-Glass Windows Done Right?
Call (863) 208-6105 for a free estimate on your Mr-Glass energy-efficient windows in Pembroke Pines. A live person answers, we’ll schedule a time that works, and we’ll put the price in writing before any work starts. Done right, the first time, with a company that plans to be here in thirty years.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.