Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Door Installation in Pembroke Pines: What to Know First
We provide independent Mr-Glass door installation in Pembroke Pines, and most jobs are completed in a single visit, usually within three to five hours on site. We are not affiliated with or authorized by Mr-Glass, which means we answer to you, not to a manufacturer’s service script. Pricing runs honest and upfront: you will see the number before the work starts, and the final bill will not surprise you. If you own a Mr-Glass door that is not closing square, call (863) 208-6105 and a live person will answer.
How Mr-Glass Products Fail - and How We Fix Them
Most Mr-Glass door problems we see in Pembroke Pines are not mysteries. They are the result of heat, humidity, and salt air working on hinges, seals, and frames for years without anyone catching the first sign. Here are the failure modes we see most, and what we do about them.
- Roller and track wear on the Mr-Glass sliding patio door. The original rollers were never designed for the grit that blows through western Broward County screens. When rollers flatten, the panel drags, the track scores, and the door binds in July. We replace the rollers with a heavier aftermarket set rated for coastal conditions and re-align the panel so it glides, not grinds.
- Threshold seal rot on entry door units. Mr-Glass entry thresholds are composite, not solid aluminum, and after eight to ten years of Pembroke Pines afternoon downpours, the underside starts to sponge. The door looks fine, but water is getting under it. We pull the threshold, inspect the subfloor, and set a new sealed threshold before the rot reaches the framing.
- Hinge sag on Mr-Glass French and double doors. The factory hinges carry the weight fine when the reveal is perfect. But once one hinge screw loosens half a turn, the weight shifts and the other two fail in sequence. The door scrapes the jamb on the latch side. We reset both leaves, re-shim the jamb, and the doors close with a single finger again.
- Weatherstrip compression set on exterior doors. The original Mr-Glass seal is foam with a vinyl skin. South Florida sun bakes it stiff, and once it takes a set, it will not bounce back. Drafts, bugs, and heat intrusion start at the bottom corner. We strip the old weatherstripping and install a marine-grade replacement with a longer memory.
- Impact glass delamination at the edges. We see this on older Mr-Glass impact-rated lites that have spent a decade facing east or west. The laminate starts to haze at the bottom corners. If caught early, some units can be re-sealed; if not, the lite gets replaced with a current PGT or CGI lite that carries a fresh warranty and meets the current Florida Building Code for the Pines.
Our Mr-Glass Door Installation Process
Every Mr-Glass job we take follows the same order. No shortcuts, no surprises, no second appointment left hanging.
- 1
The call. You reach a live person, day or night. We ask what the door is doing, not what you think it needs. That is the glazier’s habit: symptoms before solutions.
- 2
The measure. Our technician measures every opening twice. If the numbers do not match, we measure a third time before we quote anything.
- 3
The quote on paper. You get a written line-item quote. We tell you what is OEM, what is better aftermarket, and what the manufacturer warranty will and will not cover on each part.
- 4
The install. Background-checked, uniformed technicians do the work. We level, shim, flash, and seal the way Dale Kessler learned at McFatter Technical College: a door is only as good as the frame holding it.
- 5
The test. The door gets cycled a dozen times. Latch, lock, seal, reveal. If the pane is not true, the job is not done, and we start over on the spot.
- 6
The paperwork. Before our truck leaves your driveway, both warranty layers are registered in writing with durations stated. That is The Keystone Standard, and it is non-negotiable.
What Mr-Glass Door Installation Costs in Pembroke Pines
Every house is different, but these are the numbers we quote most often for Mr-Glass work in Pembroke Pines:
- Sliding door roller replacement and track re-alignment: $180-$320
- Entry door threshold replacement with sealing: $240-$420
- French or double door hinge reset and re-shim: $200-$380
- Full weatherstrip replacement on an exterior door: $140-$260
- Impact glass lite replacement (standard single door lite): $450-$900 depending on size and approvals needed
What moves the price is the condition of the jamb, whether the opening is out of square, and whether your existing hardware can be salvaged or needs to be replaced. We show you the quote before we start, and the final bill matches it because we do not write change orders on surprise line items. Call (863) 208-6105 for a free estimate on your specific door.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We have been serving Pembroke Pines and the surrounding communities since 2008, through the craft tradition Dale Kessler grew up in. Dale grew up in Pembroke Falls and spent his summers cutting glass in his father’s shop instead of going to camp, so the work is not a franchise playbook to us; it is the family trade. We also stock and install PGT, CGI, CWS, and ES Windows, so if your Mr-Glass door has reached the point where replacement beats repair, we will quote a direct comparison on paper and let you decide. Every job is covered by the Done Right Promise, and we are the company that still answers the phone if something goes wrong. We will be there when we say.
FAQs
In many cases yes, if the work follows manufacturer specifications and the parts used meet the same standard. That is the catch: a bad repair can void your warranty, and a good one will not. We know what Mr-Glass will and will not honor, and we document every part and every step. If it is not in writing, it is not a guarantee - it is a guess.
We can source genuine Mr-Glass parts when they are available and when they are worth the wait. Some Mr-Glass components are on long lead times, and for many of them, a quality aftermarket part actually outperforms the original under Pembroke Pines conditions. We will quote both and let you choose with the numbers in front of you. Call (863) 208-6105 to discuss your specific door.
A good rule of thumb: if the frame is sound and the glass is intact, repair usually makes sense. If the frame is rotted, the jamb is out of square, or the impact lite is delaminating, you are usually better off replacing. We are not the cheapest bid in the room, so we have no reason to push a replacement you do not need. We will tell you what we would do in our own house.
Most Mr-Glass door repairs and installations we handle are completed in a single visit, typically three to five hours on site. For complete door replacements with impact lites, we order the lite before we show up so there is no second appointment left hanging. Call (863) 208-6105 and a live person will schedule the visit, not a call center.
When the job requires one, yes. Replacement doors that change the opening size or affect the building envelope generally need a permit in Pembroke Pines, and we pull it, coordinate the inspection, and pass it before we consider the job done. For straightforward hardware and seal repairs, no permit is typically required, and we will tell you which category your job falls into before any work starts.
For a free estimate on your Mr-Glass door, call (863) 208-6105. Our technicians are background-checked, uniformed, and on time. A live person answers the phone, and the price you see is the price you pay.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.