Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Window Installation in Pembroke Pines: What to Know First
Independent ES Windows window installation in Pembroke Pines runs $650 to $1,400 per opening for a standard retrofit, while full-frame replacement on an ES Windows unit typically lands between $900 and $1,800 depending on size and whether the original frame is sound. We set most ES Windows installs in a single day, and we are the shop homeowners call when the first installer left a window out of square and the warranty paperwork never showed up. If you own an ES Windows product and need it set right, call (863) 208-6105.
This page is for Pembroke Pines homeowners who already own ES Windows, or are buying them, and want the installation done by a crew that has actually worked on these units. We are an independent ES Windows service provider, not a factory branch, which means we answer to you, not a territory manager.
How ES Windows Products Fail - and How We Fix Them
- Casement windows binding at the lower hinge on the 7800 series. The ES Windows 7800 casement uses a friction stay hinge that wears unevenly in Pembroke Pines humidity, especially on windows facing east where morning sun hits wet hardware. The sash drops a few millimeters and the lock no longer lines up. We replace the hinge set and shim the sash back to true rather than forcing the lock, which is what cracks the keeper plate.
- Awning windows leaking at the top corners after a bad retrofit. We see this on the ES Windows 5600 awning line when the previous installer caulked over the weep holes or set the window without sloping the sill. Water pools, the frame corner swells, and the operator arm strains. We pull the unit, reset it on a sloped sill with backer rod and a proper sealant bead, and that leak stops.
- Sliding windows jumping the track on the 9000 series. The ES Windows 9000 slider rides on a nylon roller that picks up sand and grit from Pembroke Pines landscaping. Owners force the sash, the roller flattens, and the panel starts dragging. We swap in the OEM roller assembly when it is available, or a matched aftermarket roller with the same wheel diameter, and re-square the frame so the sash glides without fighting.
- Fixed and picture windows fogging between the glass on older ES Windows units. On the ES Windows fixed lines from the mid-2000s, the desiccant in the spacer bar saturates after years of South Florida humidity cycles, and the seal lets go. Condensation between the panes is not something you wipe away. We replace the insulated glass unit, confirm the frame is still true, and reset the glass with fresh setting blocks.
- Double hung sashes that will not stay up on the 6600 line. The ES Windows 6600 double hung uses a block and tackle balance, and the plastic shoe cracks after enough cycles in the heat. The sash drops hard, and that is a finger injury waiting to happen. We replace both balances with the correct weight-rated part, not a generic one-size balance, and the window holds where you leave it.
Our ES Windows Window Installation Process
Every ES Windows job we take in Pembroke Pines follows the same sequence, and we do not skip steps to save time.
- 1
Measure first, twice. We measure every opening ourselves, even if you have the factory order sheet. Pembroke Pines homes settle, and a frame that measured 48 inches in 2009 may not measure 48 inches today.
- 2
Inspect the frame and rough opening. We check for rot, termite damage, and out-of-square conditions before we order or set anything. If the frame is compromised, we tell you before we cut.
- 3
Parts decision on paper. We quote OEM ES Windows components where they are available and matched aftermarket parts where the OEM part has a known weak point. You see both options and the price difference in writing before we proceed.
- 4
Set the window. We shim, level, and square the unit in the rough opening, then fasten it to the manufacturer’s pattern. No drywall screws, no improvising.
- 5
Seal, flash, and tool the joint. We use a backer rod and elastomeric sealant, tooled flat, and we check that weep holes remain clear. Every Pembroke Pines afternoon storm will test this work, so we do it like we will be back.
- 6
Clean up and walk you through it. We remove the old unit and all packaging, show you how the window operates, and hand you the warranty paperwork. Both manufacturer warranty layers registered in writing before we leave the driveway.
What ES Windows Window Installation Costs in Pembroke Pines
The price of an ES Windows install in Pembroke Pines depends on the window style, the frame condition, and whether you are doing a retrofit into an existing frame or a full-frame replacement. Here is what we quote most often:
- Retrofit install of a single ES Windows casement or awning: $650 to $950
- Full-frame replacement of a single ES Windows slider or double hung: $900 to $1,400
- Bay or bow window installation with structural support: $2,800 to $5,500
- Glass-only replacement in an existing ES Windows frame: $450 to $800 per pane
Permit fees in Pembroke Pines run separate from the labor, and we pull them when the project requires it. The fastest way to get an exact number is to call (863) 208-6105 and have us measure. The estimate is free, and it is in writing.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for ES Windows Work
We have served Pembroke Pines since 2008 through a craft tradition that predates the TruePane name. Dale Kessler grew up in Pembroke Falls and learned the trade the way his father did: measure, fit, set, and stand behind it. Every ES Windows install we do carries the Done Right Promise. If the pane is not true, the job is not done, and we come back and make it right without paperwork or argument.
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and ES Windows, which means we can quote side by side on paper and tell you honestly when another line fits a Pembroke Pines opening better. A live person answers the phone 24 hours a day. Background-checked, uniformed technicians do the work. And the warranty registration happens before the truck leaves the driveway, every time.
FAQs
Yes. We install owner-supplied ES Windows in Pembroke Pines, provided the units are the correct size for the openings and the frames are in serviceable condition. We measure first and tell you if the window will work before we touch a tool. Call (863) 208-6105 to schedule a measurement.
In most cases, an installation by anyone other than an authorized factory installer will not necessarily void the glass and frame warranty, but the factory will not cover damage caused by improper installation. If a window was set out of square and the frame twists, the manufacturer will point to the install. We register both warranty layers in writing, with durations stated, so you know exactly what is covered and for how long. If it is not in writing, it is not a guarantee, it is a guess.
Most single-window ES Windows installs are done in one day, including cleanup. A full-house job with five or more openings typically takes two to three days, depending on the frame condition and whether we are pulling permits. We will tell you the schedule at the estimate, and we hold to it.
Some ES Windows hardware, particularly hinges and lock sets for discontinued lines, has longer lead times than common brands. We keep a stock of the most-failed ES Windows components at our shop and order OEM parts directly for anything we do not have. If a part is backordered, we tell you the wait before the work starts and offer a matched aftermarket option when it serves you as well or better. Call (863) 208-6105 and we can check availability while you are on the phone.
Yes, when the job requires it. Pembroke Pines requires permits for structural changes, and a full-frame ES Windows replacement can fall under that. We pull the permit, schedule the inspection, and we do not call the job done until the inspector passes it. No surprises on the bill, no permits skipped to save a day.
If you have ES Windows in Pembroke Pines and the installation was never done right, or you are planning a replacement and want it set true the first time, call (863) 208-6105 for a free estimate. We will measure, quote in writing, and stand behind the work.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.