Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Energy-Efficient Windows in Pembroke Pines: What to Know First
ES Windows energy-efficient window service in Pembroke Pines typically runs $240 to $1,850 depending on whether we’re replacing a failed insulated glass unit, rebuilding a sash, or swapping out worn weatherstripping on an existing frame. Most ES Windows repairs are completed in a single visit, with the glass ordered to spec and the frame work done on site. We are an independent ES Windows service provider, not a factory rep, which means we diagnose first, quote on paper, and stand behind the work with a 90-day guarantee.
If you own ES Windows in Pembroke Pines and you’re noticing condensation between the panes, a room that won’t hold temperature, or frames that feel warm to the touch by mid-afternoon, this page is for you. Call (863) 208-6105 and a live person will answer, day or night.
How ES Windows Products Fail - and How We Fix Them
- Fogged glass on the ES 8000 Series casement line. The Intercept warm-edge spacer used in many ES 8000 units does a fine job until the sealant bead thins from years of direct Broward sun on west-facing elevations. Once moisture gets past it, you get the permanent haze between the panes. We measure the exact thickness and Low-E coating of the original unit, order a matching insulated glass replacement, and reset it so the frame isn’t carrying glass weight it wasn’t designed for.
- Warped sashes on older ES 300 Series horizontal sliders. Vinyl expands and contracts at a different rate than the glass it’s holding. In Pembroke Pines, where a summer afternoon can push surface temps past 130 degrees on a south-facing wall, those sashes bow over time and break the compression seal at the meeting rail. Air leaks in, the AC works harder, and the homeowner blames the glass when the frame is the problem. We rebuild the sash or, when the bow is too far gone, replace it and register the warranty paperwork before we leave.
- Failed argon gas retention on double-pane ES units. Argon is colorless, odorless, and when it’s gone, the window loses about 30 percent of its insulating value without any visible sign. A homeowner notices the room feels warmer, the bill creeps up, and they can’t point to a reason. We use a glass-surface temperature differential check during the diagnostic, and when the gas has leaked, we quote a true replacement rather than offering a temporary fix that won’t hold.
- Deteriorating glazing beads on ES 400 Series fixed picture windows. The glazing bead is the vinyl trim that holds the glass into the frame. Over time, especially on unshaded east-facing walls that take morning heat then cooling rain, these beads get brittle and crack. The glass can still be good. We replace the bead, reset the glass, and the window functions like new for a fraction of a full-unit price.
- Failed Low-E coating showing as a cloudy film. Sometimes what looks like a seal failure is actually the Low-E coating itself oxidizing from years of humidity exposure through a microscopic seal gap. The fix is the same since the glass unit gets replaced, but the diagnosis matters because it tells us whether the frame is still worth investing in. Dale Kessler has measured, set, and replaced enough ES glass in western Broward County to know the difference in the first ten minutes.
Our ES Windows Energy-Efficient Windows Process
- 1
You call, a person answers. We schedule a time that works, and we show up in a marked truck with a uniformed technician. Every job starts with a conversation about what you’re seeing, not a sales pitch about what we’re selling.
- 2
We measure every opening twice. Glass thickness, frame depth, spacer type, gas fill, and Low-E coating all get written down on paper. A window is only as good as the frame holding it, so we check the frame condition before we quote anything.
- 3
You get a side-by-side quote on paper. We show you the cost of an OEM ES insulated glass unit versus a quality aftermarket equivalent with the same performance specs. If aftermarket makes sense, we tell you why. If OEM is the only right call for warranty-safe work, we say that too.
- 4
We do the work in a single visit for most jobs. The glass is ordered to your exact spec, and when it arrives, we install it, reset the sash, replace the weatherstripping, and check the seal with a surface-temperature differential test.
- 5
Register both warranty layers in writing before we leave. That’s The Keystone Standard, and it’s not a slogan. You get the manufacturer’s coverage and our workmanship guarantee, written down with durations stated, sitting on your kitchen counter before the truck pulls away.
- 6
If it’s not done right, it’s not done. Our Done Right Promise covers the work. No paperwork fight, no arguing over fine print. We make it right because a company that plans to be in Pembroke Pines in thirty years cannot afford to do otherwise.
What ES Windows Energy-Efficient Windows Costs in Pembroke Pines
Here are the price ranges we see most often for ES Windows energy-efficiency work in Pembroke Pines homes:
- Insulated glass unit replacement (small to mid-size window): $240-$480 per unit, depending on glass package and Low-E spec.
- Insulated glass replacement on larger fixed or picture windows: $400-$850, with custom tint or solar glass pushing toward the top of that range.
- Full sash rebuild including weatherstripping and hardware reset: $180-$350 per sash.
- Glazing bead replacement with glass reset: $90-$160 per window.
- Complete ES window replacement with energy-efficient double-pane glass: $850-$1,850 per opening, depending on size, frame condition, and glass package.
What moves the price is glass thickness, the Low-E coating you choose, and whether the frame is square enough to take a new unit without correction work. We quote everything on paper before any work starts, and the number we quote is the number on the final bill. Call (863) 208-6105 for a free estimate on your ES Windows.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been setting glass in South Florida homes since 2008, and Dale Kessler founded TruePane in 2008 with a rule he keeps on the whiteboard: if the pane is not true, the job is not done. That rule governs every ES Windows repair we take on, whether it’s a fogged 8000 Series casement in Pembroke Falls or a warped 300 Series slider over in SilverLakes.
We’re an authorized installer for more than a dozen manufacturer lines including, PGT, which means when an ES unit is beyond saving, we can show you side-by-side quotes for replacements on paper without any pressure. Our technicians are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. A person who works for us and answers our calls.
FAQs
No. As an independent ES Windows service provider, we use OEM or spec-matched aftermarket parts that preserve your original coverage. We register both warranty layers in writing before we leave, and we’ll tell you plainly if a repair approach could affect your manufacturer coverage. Call (863) 208-6105 if you want us to look at your paperwork and give you a straight answer.
Most insulated glass replacements are installed within one to two weeks of the initial measurement, depending on glass availability. The work itself is usually a single visit. Call (863) 208-6105 and we’ll tell you what the current lead time looks like before you commit to anything.
If the frame is square, the hardware is sound, and the only failure is the glass unit, replacement of the insulated glass unit is almost always the smarter money. When the frame has warped or the sash is compromised, full replacement starts making more sense. We’ll give you both numbers on paper and let you decide with the facts in front of you. Call (863) 208-6105 for a free estimate.
Yes. We identify the existing coating during the diagnostic, match the solar heat gain coefficient and visible light transmittance on paper, and order the replacement unit to that spec. If a better-performing coating makes sense for a west-facing Pembroke Pines wall, we’ll quote that option too, but we never substitute without your written approval.
We do. We can quote replacement glass with enhanced UV-blocking coatings, including tinted and solar options, for any ES Windows frame that’s still structurally sound. The upgrade is done glass-for-glass without tearing out the frame, which keeps the cost well below a full window replacement. Call (863) 208-6105 and we’ll walk you through the options.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After