Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Window Replacement: The Pembroke Pines Owner’s Guide
ECO Window Systems window replacement in Pembroke Pines typically runs $450 to $1,100 per window installed, depending on the series and whether the sash, glass unit, or full frame needs replacing. We stock common ECO balances, rollers, and insulated glass units on our trucks, so many jobs are done in a single visit. Most Pembroke Pines homeowners discover the failure the same way: a window that suddenly drops when opened, a sash that sticks mid-track, or glass that fogs between the panes after a hard South Florida summer.
We’re an independent window and door contractor, not affiliated with ECO Window Systems, but we work on their windows regularly throughout western Broward County. If the pane is not true, the job is not done, and that rule applies whether the window is two years old or twenty.
Which ECO Window Systems Models This Applies To
ECO Window Systems sells several lines across South Florida, and the replacement part that fits one series will not necessarily fit another. The most common units we service in Pembroke Pines are their single-hung and horizontal slider lines, which use a coil balance system and a proprietary shoe that snaps into the jamb. The balance shoe is the part we replace most often. It is a small nylon fitting that holds the coil spring under tension, and it will crack eventually in the salt-and-humidity air, usually after six to ten years.
Identify your window by looking for a white sticker on the inside track or the top edge of the sash. ECO stamps a series code there, often beginning with ES or EW, followed by numbers. If the sticker has peeled off, give us a call at (863) 208-6105 and our techs can match it by measuring the balance shoe width and the coil spring size. Here is the gotcha: ECO changed its balance shoe profile around 2014, so a 2012 window and a 2016 window that look identical from the outside may take different internal parts. We carry both versions on the truck because that mismatch is exactly what trips up well-meaning DIY work.
On OEM versus aftermarket: for balances and rollers, a quality aftermarket part often matches or exceeds the OEM. For insulated glass units, we prefer the OEM specification because the low-E coating and argon fill need to match the original, or you get a window that looks different from its neighbor. We quote both ways on paper so you see what you’re buying.
Signs Your ECO Window Systems Window Replacement Is Failing
- Sash drops or slams shut when you release it. This is the coil balance losing tension or the shoe cracking. One side has failed and the other is carrying the full weight of the sash, which will wear it out faster.
- Window binds or requires two hands to move. The spring is winding unevenly or the roller or shoe has worn enough that the sash is out of square in the track. Forcing it only chews up the jamb liner.
- Condensation or fog inside the glass. The insulated glass unit’s seal has failed. In Pembroke Pines humidity, once the seal is breached, the argon escapes and the interior surfaces start collecting moisture. The glass cannot be cleaned from the inside; the unit needs replacing.
- A grinding or scraping sound when operating. The roller or balance shoe is worn to the point that metal is touching metal or nylon is dragging in the track. That sound is the part telling you it is done.
- The window will not stay up even with the lock engaged. This is the balance system fully failed, and it is a safety issue, not just an annoyance. A falling sash can injure fingers or hands.
Replacement Cost & What’s Included
In Pembroke Pines, a standard ECO Window Systems balance shoe and spring replacement on a single window runs between $175 and $325 installed. A full insulated glass unit replacement, depending on glass package and size, typically lands between $350 and $700 installed. Full sash or frame replacement, which we recommend when the jamb itself is warped or the vinyl is cracked, runs $450 to $1,100 per window.
- Balance shoe and spring, installed: $175-$325
- Roller replacement, two per sash, installed: $150-$275
- Insulated glass unit (IGU), installed: $350-$700
- Full sash replacement, installed: $450-$800
- Full window replacement (jamb and sash), installed: $550-$1,100
Every quote includes parts, labor, disposal of the old unit, and both warranty layers registered in writing before we leave the driveway. No line items appear on the bill that were not on the quote. A square deal, put on paper, every time. The Done Right Promise stands behind the workmanship.
DIY or Call Us?
Here is the honest split. You can safely confirm the model by finding the sticker, measure the visible glass dimensions, and note which side of the sash is binding. That helps you evaluate quotes intelligently.
What you should not do is attempt a window replacement on a single-hung or slider without knowing the balance system type. Those coil springs are tension-loaded. One wrong move with a screwdriver and the assembly can release suddenly, which is a legitimate injury risk. We have also seen more than a few Pembroke Pines homeowners order a part online only to discover it was for the other generation of ECO hardware and would not seat correctly. If the window is fogged, definitely call us: cutting, setting, and sealing insulated glass so it does not fog again in two years is not a straightforward afternoon project.
Call (863) 208-6105 and a person answers, any hour. We will tell you what the window actually needs, whether that is a $200 balance job or a full frame swap, before we ever quote what it might cost.
FAQs
Expect six to ten years from the balance system and ten to fifteen from a good insulated glass unit in Pembroke Pines, where heat, humidity, and salt air work constantly on seals and springs. A shaded north-facing window will outlast a west-facing one by years. Call (863) 208-6105 and we can assess your specific windows in the field.
Balance springs and rollers are not worth repairing; once they have worn or cracked, replacement is the only fix that holds. Fogged glass cannot be repaired either, because the seal between the panes is gone. Call (863) 208-6105 and we will tell you straight which path makes sense, parts in hand.
Most single-window part replacements are done in under an hour, and because we carry common ECO parts on the truck, a single visit usually finishes the job. A full window replacement with jamb work can take two to three hours. Some homes need a separate glass order, which is a few days out, and we schedule it so it is one follow-up visit, not three.
We stock the common balance shoes, coil springs, and rollers for ECO single-hung and slider lines on our trucks, plus glass units we order to exact spec from our supplier. We also stock parts for Andersen, and Pella lines. Call (863) 208-6105 with your model info and we can confirm stock before we roll out, most of the time.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.