Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Window Replacement in Pembroke Pines: What to Know First
We handle CWS window replacement in Pembroke Pines as an independent CWS service provider, not a factory-authorized dealer. Most CWS replacement jobs run one to two days on site, and you’ll get a written line-item quote before any work starts. If the frame is still square and the glass is the only failure, you may not need a full replacement at all, which is the kind of thing we’ll tell you before you spend the money. This page is for CWS owners in Pembroke Pines who need straight answers on whether to repair or replace. Call (863) 208-6105 and a live person answers, day or night.
How CWS Products Fail - and How We Fix Them
CWS windows show up in a lot of Pembroke Pines homes built from the mid-1990s through the 2010s. We see the same failure patterns repeat, and they’re rarely the glass itself.
- Seal failure on CWS 4000-series insulated units. The 4000 line used a thinner spacer than many competing mid-grade windows, and after fifteen or twenty years of South Florida humidity, that spacer breaks down. You’ll see fog between the panes that won’t wipe off. We replace the insulated glass unit, not the whole window, and the new unit carries a manufacturer seal warranty in writing.
- Vinyl expansion causing sash bind on CWS Series 2000 single-hung windows. West-facing windows in Pembroke Pines, especially in Pembroke Falls and SilverLakes, bake all afternoon. The vinyl frame swells and the sash won’t slide. Forcing it breaks the balance. We trim and realign the sash, replace worn balances, and the window operates like new without a full replacement.
- Water intrusion through CWS frame corners. The corner welds on some CWS frames were lighter than what we’d put our name on. Once that weld separates, rain blows in during a summer storm. We open the corner, reseal with a structural adhesive, and reset the frame. If the weld is too far gone, we quote a full frame replacement and install a sturdier line, often PGT or Andersen, alongside the CWS quote so you can compare on paper.
- Fogged glass on CWS sliders and picture windows in Pembroke Pines single-story homes. CWS large-format units were common in lakefront and golf-course homes out near Chapel Trail. The seals on big units fail faster because the glass flexes more in wind load. We measure, order the right IGU, and set it same-day once the glass arrives.
- Lock and keeper alignment issues on CWS casement windows. The multipoint locking hardware on CWS casements wears out after years of use, and once the lock channel drifts, the window won’t seal tight. We install OEM-grade replacement hardware when available, or a quality aftermarket match that fits the original mortise so you don’t see extra holes in the frame.
Our CWS Window Replacement Process
Here’s how a CWS job goes from your first call to the final walk-through.
- 1
Call and schedule. You call (863) 208-6105. A live person answers and books a time that works for you. No call center, no callback form.
- 2
Measurement and diagnosis. A background-checked tech arrives in uniform, measures every opening twice, and tells you whether you need glass replacement, sash replacement, or a full frame replacement before quoting anything.
- 3
Written quote, side by side. We put the CWS repair or replacement quote on paper, and if a different manufacturer line would serve you better, we show that quote on the same page. You see exactly what you’re buying.
- 4
Parts decision. If CWS parts are still available through our supply chain, we use them. If they’re not, we offer quality aftermarket components matched to your window’s dimensions and hardware. Warranty coverage is stated in writing either way.
- 5
Installation and testing. We set the new window or glass, shim it square, seal it, and test the operation. If the pane is not true, the job is not done.
- 6
Guarantee and cleanup. We register both warranty layers in writing before the truck leaves the driveway. Then we sweep up and haul off everything.
What CWS Window Replacement Costs in Pembroke Pines
For CWS windows in Pembroke Pines, repair and replacement pricing breaks down like this.
- Single IGU (insulated glass unit) replacement: $220-$480 per pane, depending on size and coating
- Sash replacement (per sash): $350-$650 installed
- Full frame replacement, standard CWS size: $800-$1,500 per opening
- Large-format or custom CWS unit: $1,500-$3,500 per opening
What moves the price is frame condition, glass package (low-E, impact, tinted), and whether the original CWS hardware can be reused. Older CWS frames in Pembroke Pines near the coast or on lakefront lots need more reframing work than interior units. Call (863) 208-6105 and we’ll give you a written line-item quote, free.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for CWS Work
Dale Kessler grew up in the Pembroke Falls neighborhood and has spent the better part of three decades measuring, fitting, and setting glass in South Florida homes. He learned the fundamentals at McFatter Technical College in Davie, where an old glazier instructor drilled into him that a window is only as good as the frame holding it, a lesson he still quotes to every new hire.
We’ve been serving Pembroke Pines and western Broward County since 2008 through a heritage of craft that started with Dale’s father’s glass shop. Every CWS job carries our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. If it is not in writing, it is not a guarantee, it is a guess.
When a CWS window can’t be saved, or when a CWS replacement doesn’t make financial sense, we carry more than a dozen manufacturer lines at authorized installer level, including, PGT, and CGI. You get side-by-side quotes on paper so you see exactly what you’re buying.
FAQs
Yes. We work on CWS windows in Pembroke Pines every month as an independent CWS service provider, and while we’re not affiliated with CWS, we know their product lines and failure patterns from years of hands-on repair and replacement work. Your CWS warranty status doesn’t change just because an independent contractor touched the window, but we’ll tell you in writing what’s covered before we start. Call (863) 208-6105 to talk through your specific windows.
Some CWS parts are still available through our supplier network, and when they are, we use them. When they’re not, we source quality aftermarket hardware and glass that matches the original dimensions and finishes, and we state exactly what you’re getting on the quote. Availability depends on the CWS series and the year your windows were built, so call us and we’ll check the specific model before you commit to anything.
If the frame is sound and the failure is the glass seal, the hardware, or the sash balance, repair is usually the better call. If the frame is warped, rotted, or the corner welds have separated in multiple places, replacement makes more sense. We’ll measure and inspect on site, then give you both options quoted in writing so you can decide with real numbers. Estimates are free at (863) 208-6105.
A live person answers the phone 24 hours a day, 7 days a week, and most CWS replacement jobs are scheduled within a few business days once the parts or glass arrive. Large orders or custom glass can take longer, and we tell you the timeline in the written quote so the bill and the calendar both match. Call (863) 208-6105 to get a specific date for your windows.
No. The quote is what you pay unless you approve a change in writing first. Our fixed pricing has no surprise line items, and if a CWS window needs more than we originally quoted, we stop, show you the issue, and get your approval before any additional work happens. That’s a square deal, and it’s been the standard here since 2008.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.