Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Window Replacement in Pembroke Pines: What to Know First
Andersen window replacement in Pembroke Pines typically runs $900 to $2,800 per opening depending on the series, glass package, and whether you need a full frame replacement or an insert. Most single-opening jobs are completed in one day, and we quote Andersen work side by side against PGT, CGI, Pella so you can see the real numbers before you commit. We’re an independent Andersen service provider; Andersen does not do installs, and we don’t answer to their sales targets. We answer to you.
This page is for Pembroke Pines homeowners who already own Andersen windows, know what they like about them, and want straight answers about replacing them when they go bad. If that’s you, call (863) 208-6105 and a live person picks up, day or night.
How Andersen Products Fail - and How We Fix Them
- Fogged glass in 200 Series and 400 Series tilt-wash windows. Andersen’s dual-pane seals break down after years of South Florida humidity cycles and direct afternoon sun. Once the desiccant inside the spacer is saturated, the glass fogs between the panes and no amount of cleaning fixes it. We replace the sash or reglaze the unit with new insulated glass rather than masking the symptom.
- Sash rot in Andersen Woodwright and 400 Series wood-clad frames. In Pembroke Pines, sprinkler overspray and wind-driven rain hit the bottom corners of wood-clad windows hard. The vinyl cladding traps moisture against the wood and the sill begins to soften. We cut out the rotted section, treat the surrounding wood, or move to a full frame replacement when the rot has spread past the sill into the rough opening.
- Warped vinyl frames in 100 Series units. The 100 Series uses a composite material that’s strong but flexes under the wrong installation. Homes in western Pembroke Pines near the Everglades see more frame movement because of the clay soil’s expansion and contraction. A window installed too tight against the rough opening will bind after a few wet seasons. We reset the frame with proper shim spacing and sealant joints so it tracks square again.
- Failed balances in Andersen double-hung 400 Series windows. The spiral balances that hold the sash up wear out after 15 to 20 years of daily use. The window either won’t stay open or slams shut when you let go. Andersen has changed the balance design more than once, and using the wrong replacement part voids the tilt-latch warranty. We match the balance to the specific window date code rather than guessing.
- Storm window hardware fatigue on older Andersen Narroline units. Many Pembroke Pines homes built in the 1980s and 1990s still have Narroline double-hungs with exterior storm panels. The corner keys and slide bolts corrode in the salt air, and the storm panel rattles in every wind gust. We can replace the hardware or upgrade the entire opening to a modern Andersen 400 Series insert without tearing out the interior trim.
Our Andersen Window Replacement Process
- 1
Call and schedule. A live person answers at (863) 208-6105. No voicemail tree, no callback form. We set a time that works for you and show up when we say we will.
- 2
Measurement and diagnosis. Our tech measures every opening twice, checks the existing frame for rot or settlement, and confirms which Andersen series you have. We note the date code so we’re ordering the correct parts, not the closest guess.
- 3
Written quote. We put Andersen options on paper side by side with equivalent PGT, CGI, Pella, or ViewLux units. You see the glass package, warranty terms, and total installed price in black and white before you decide anything.
- 4
Parts decision. If the existing frame is sound, we use Andersen OEM sashes and balances wherever they’re available. If a part is backordered or discontinued, we tell you and offer a quality aftermarket option with the trade-offs explained. If the frame is gone, we pull the whole unit and set a new one square.
- 5
Installation. Background-checked, uniformed techs remove the old window, prepare the opening, flash the perimeter properly, set the new unit, and insulate the gaps. Both manufacturer warranty layers are registered in writing before the truck leaves your driveway.
- 6
Cleanup and walkthrough. We remove every piece of old glass and debris, test every window with you, and show you what was done. Then the Done Right Promise starts: if something’s not right, we make it right. No paperwork fights, no arguing.
What Andersen Window Replacement Costs in Pembroke Pines
Here’s what we’re seeing on the ground in Pembroke Pines right now:
- Insert replacement, 100 Series or 200 Series: $900 to $1,600 per opening, installed.
- Insert replacement, 400 Series wood-clad: $1,400 to $2,400 per opening, installed.
- Full frame replacement, any series: $1,800 to $2,800 per opening including trim work and flashing.
- Glass-only reglaze for a fogged sash: $350 to $650 per sash, depending on the glass package.
What moves the price: opening size, whether the frame is salvageable, impact glass requirements, and how many windows you’re doing at once. Seniors and veterans get 5 percent off permanently. Call (863) 208-6105 for a written line-item quote. Estimates are free, and the number on the quote is the number on the bill.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for Andersen Work
We’ve been setting glass in South Florida since 2008, and Dale Kessler founded TruePane in 2008 with one rule still written on the shop whiteboard: if the pane is not true, the job is not done. That’s not a slogan. It’s the standard every tech works to, and it’s why our techs take the time to measure twice, order the right date-coded parts, and register both warranty layers before they leave your house.
We know Andersen well, but we also install PGT, CGI, Pella. That matters because it means we don’t have to sell you an Andersen replacement if another line does the job better for your particular opening and budget. You get the square deal on paper, not a brand pitch. The Done Right Promise covers the workmanship, and if something isn’t right, we’re still in town, still answering the phone, and still standing behind it.
FAQs
Replacing a failed Andersen window does not void the warranty on the rest of your home’s windows. However, using incorrect replacement parts on an Andersen window that still has warranty coverage can void that specific window’s coverage. We check the date code and warranty status before we order anything. If it’s not in writing, it’s not a guarantee; it’s a guess.
Yes, if the frame is sound and the only failure is a fogged or cracked pane, we reglaze the existing sash with new insulated glass. This works well on 200 Series and 400 Series units where the frame is still tight. Call (863) 208-6105 and we’ll tell you honestly whether the glass can be saved or the whole window should go.
Most single-opening replacements are completed in one day from start to cleanup. A full house of 10 to 12 windows typically takes two to three working days depending on the series and whether we’re doing inserts or full frame work. We’ll give you a written schedule before we start and we’ll keep it.
Yes. Many Pembroke Pines homes are in wind-borne debris zones, and we install Andersen impact-rated units that meet Miami-Dade and Broward County requirements. We’ll pull the specific opening size and series, confirm what the code requires for your address, and quote it on paper. The permit is our job, not yours.
A glass-only reglaze for a fogged Andersen sash runs $350 to $650 depending on the glass package. A full sash replacement runs higher. Don’t guess at it; call (863) 208-6105 for a free estimate, and you’ll get a written number with the warranty terms in black and white.
Call (863) 208-6105 to schedule your free Andersen window replacement estimate in Pembroke Pines. A live person answers, day or night.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.