Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
After3-Panel Sliding (3-Lite Roller) Windows in Pembroke Pines, FL | TruePane Windows & Doors
Wide openings call for a window that can carry the view without giving up impact protection. The 3-Panel Sliding (3-Lite Roller) Window does exactly that: three horizontal panels in one track system, with laminated impact glass across every lite and two of the three panels able to glide for ventilation. We install these across Pembroke Pines, from gated communities off Sheridan Street to older homes near Flamingo Road that are getting their first code-compliant window upgrade. It’s a configuration that fits Florida architecture naturally: ranch homes with long rear elevations, second-story bonus rooms with wide sightlines, and retrofits where a single picture window used to be. Call (863) 208-6105 to discuss your opening.
Product Overview - 3-Panel Sliding (3-Lite Roller) Windows
A three-panel horizontal roller configuration for wider openings, with laminated impact glass across all three lites and smooth multi-panel gliding. That’s the short version. The longer version matters more in Pembroke Pines, where a wide window is also a wind-load surface and a potential point of entry for wind-driven debris. The product solves both problems at once.
Structurally, the three lites are carried in a frame engineered so the operable panels ride on rollers rather than trying to hold the entire width with a single sash. You get two operable panels (or one, depending on the configuration you choose) and fixed panels that keep the opening’s proportions stable. That matters on a 96-inch or 108-inch opening, where a smaller operable unit would limit the amount of air you can actually move through the room.
Glass is not an afterthought here. Each lite carries laminated impact glass with a PVB (polyvinyl butyral) interlayer. When impact occurs, the glass fractures but the interlayer holds the broken pieces in the frame, so the window continues to protect the building envelope rather than becoming the opening the storm was looking for. It’s the same behavior you’d expect from a hurricane-rated entry door, applied across three separate lites.
TruePane Windows & Doors supplies this product through the lines we trust and install regularly: PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass. We match the frame material and glass package to your opening and your wind zone, not to whatever happens to be in stock.
Technical Specifications
Here’s what you can specify on a 3-Panel Sliding (3-Lite Roller) Window through TruePane Windows & Doors in Pembroke Pines:
- Frame materials: Aluminum or Vinyl. Aluminum for larger spans and coastal exposure; vinyl for tighter budgets and quieter operation in inland Pembroke Pines neighborhoods.
- Track configurations: 3-Lite (2 Fixed + 1 Operable) or 3-Lite (1 Fixed + 2 Operable). The two-operable version moves more air; the one-operable version costs less per opening.
- Glass options: Laminated Impact Glass (PVB Interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass.
- Color and finish options: White, Almond, Bronze, Black, Tan.
- Screen options: Retractable Screen or Sliding Screen. Retractable screens disappear when you want a clean line across the opening; sliding screens are simpler and lower maintenance.
- Design pressure: Matched to your wind zone, up to +/-100, never higher. We don’t oversell a rating you don’t need, and we don’t undersize a rating you do.
- Compliance: Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers are available per configuration. The product is engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements.
Hurricane & Compliance Performance
Laminated Impact Glass
Laminated impact glass with a PVB interlayer holds the glass in the frame under impact. The lite may crack, but it won’t blow out and leave the interior exposed. That’s the fundamental job of the glass package, and it’s non-negotiable on this product.
Miami-Dade NOA / FL Product Approval
NOA and Florida Product Approval numbers are issued per configuration, so the exact number depends on the frame material, glass package, and size you select. We verify the applicable number on your specific quote, and the permit package we prepare for Pembroke Pines references the right submittal.
FBC / HVHZ Compliance
The product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the stricter of the two Florida wind zones, and Pembroke Pines falls under it. That’s why we don’t offer a non-impact version of this window.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. Think of them as three separate tests that simulate what actually happens in a storm: something hits, the wind cycles and pushes and pulls, and then someone tries to get through the assembly afterward.
Design Pressure Matched to Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, and never higher. A higher number is not “better” if the code doesn’t require it, because it usually means a heavier frame, tighter rollers, and a higher price. We specify what your opening actually needs.
Energy Performance Options
Low-E and insulated glass options are available for energy performance. The impact layer does the storm work; the Low-E coating and insulated air space do the comfort work. In a Pembroke Pines summer, the right glass package means the room with the big window is not the room nobody sits in.
Color & Glass Options
The finish matters because the frame is a visible architectural line, not a hidden component. White and Almond work with the Mediterranean and Spanish-revival elevations common in Pembroke Pines, where window trim is often painted a warm neutral. Bronze reads as a darker architectural metal and suits homes that have bronze-framed entry doors or darker roof profiles. Black has become the standard on modern and transitional elevations, and Tan bridges the gap between the lighter tones and the darker ones, working well on beige stucco elevations that dominate parts of the city.
Glass choice depends on which problem you’re solving. Clear laminated impact glass maximizes light transmission and is the most economical impact option, which is why it’s the base package on most quotes. Tinted glass cuts glare and solar heat gain without the cost of a Low-E coating, and it’s a strong fit for western-facing openings in Pembroke Pines where afternoon sun is relentless. Low-E insulated glass pairs the impact interlayer with an energy-performance coating and an insulating air space, making the biggest difference on wide openings like this one where you’re paying to condition the air on the other side of the glass anyway.
Installation by TruePane Windows & Doors in Pembroke Pines
An NOA-rated window is only as good as the opening it’s set in. We’ve seen failed installations in Pembroke Pines where the window itself was fine but the perimeter was never sealed properly, the frame wasn’t level, or the flashing was missing entirely. The product’s rating applies to the assembly as installed, which is why our installation practice follows AAMA 2400/2410 standards with an AAMA 812 low-expansion foam perimeter sealant.
Here’s what the process looks like on a 3-Panel Sliding (3-Lite Roller) Window. We start with a pre-install inspection of the rough opening, which matters more on wide openings where even a quarter-inch of racking translates into a panel that binds on the track. We set the frame level, plumb, and square; on a three-panel configuration, if the frame is out of square, the operable panels will never glide correctly. The perimeter gets the AAMA 812 foam seal, which seals without bowing the frame the way an overdriven screw can. We flash and integrate the frame into the existing water management of the wall assembly, which is where a lot of Florida window installers cut corners.
Pembroke Pines has its own considerations. The city is in an HVHZ wind zone, which means our permit package references the configuration-specific NOA or Florida Product Approval number for your exact window. Coastal exposure is less direct here than in beachfront cities, but wind-driven rain is still a real factor, and the wide exposed surface of a 3-panel window makes the perimeter seal and flashing that much more important. We handle the measurement, the ordering, and the submittal documentation; you handle choosing the finish and the glass.
If the window is not set square and sealed correctly, the NOA-rated system is compromised. That’s not a risk to take on a wide opening that was specifically engineered to be an impact window.
Frequently Asked Questions - 3-Panel Sliding (3-Lite Roller) Windows
Design pressures are matched to your specific wind zone, up to +/-100, and never higher. Pembroke Pines falls under HVHZ requirements, so the configuration we quote for your opening will carry a design pressure appropriate to that zone. We specify the exact rating on your quote based on the size and configuration you select. Call (863) 208-6105 with your rough opening dimensions and we can give you the exact number.
Lead time depends on the manufacturer line, the frame material, and the glass package you select. Aluminum frames and laminated impact glass are typically built to order, so expect a longer wait than an off-the-shelf vinyl window. We confirm the current lead time at the time of your quote so you can plan your project realistically. Call (863) 208-6105 and we’ll check the current production schedule for your configuration.
Yes. In Pembroke Pines, which is an HVHZ jurisdiction, your permit package will need to reference the Miami-Dade NOA or Florida Product Approval number for the specific configuration you’re installing. The number is issued per configuration, not as one blanket number for the entire product line, so it has to match your exact frame, glass, and size. We include the correct submittal documentation when we prepare your permit package. Call (863) 208-6105 if you want to confirm which approval applies to your opening.
The two track configurations are 3-Lite (2 Fixed + 1 Operable) and 3-Lite (1 Fixed + 2 Operable). Within each track configuration, sizes are built to fit your opening within the engineering limits of the frame system, not cut down from stock units. If you want both operable panels on a larger opening, the 1 Fixed + 2 Operable configuration does that. We specify the largest opening the configuration supports at your quote. Call (863) 208-6105 to discuss what fits your opening.
Track maintenance matters more on a 3-panel roller window than on a single-hung or casement. Dirt and sand accumulate in the bottom track, and the rollers drag through it every time you open the panel. Vacuum the track regularly, wipe it down, and don’t lubricate the rollers with anything that attracts more dirt. For aluminum frames in Pembroke Pines, rinse salt accumulation off the frame if you’re in an area with airborne salt exposure. If a panel starts binding on the track, don’t force it; have it looked at before the roller wears unevenly. Call (863) 208-6105 if the glide isn’t smooth anymore.
Get a Quote - 3-Panel Sliding (3-Lite Roller) Windows in Pembroke Pines
We measure, we specify, we install, and we make sure the permit package references the right approval for your exact configuration. From PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, you’ll get a quote with the frame, glass, finish, and track configuration spelled out line by line. Estimates are free. Call (863) 208-6105 to schedule your free on-site measurement and start the project.
Written by the team at TruePane Windows & Doors, serving Pembroke Pines, FL with hurricane-impact window and door installations.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
