Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom Windows & Doors for Pembroke Pines Homeowners
Custom Windows & Doors - Pembroke Pines typically run anywhere from $800 for a single custom-shaped replacement sash to $12,000 or more for a full architectural door system with oversized glass, and most homeowners work with us because what they need does not exist on a shelf. We’ve been fitting true-to-spec windows and doors in South Florida homes since Dale Kessler founded TruePane Windows & Doors in 2008, carrying forward a glazing tradition that now spans years of community service. If you have an opening that standard sizes won’t fit, glass that has to match an existing sightline, or a design that requires a manufacturer to build to your dimensions, call (863) 208-6105 and we will quote it on paper, side by side, before you spend a dollar.
What Our Custom Windows & Doors Service Includes
Custom Shape Windows
A custom shape window is exactly what it sounds like: an arched top, a circle, a hexagon, a trapezoid, or any geometry a builder drew that no stock catalog carries. In Pembroke Pines we see these most often in entry foyers, gable ends, and rooms where the homeowner wants to preserve the original architecture rather than square off the opening. TruePane measures the rough opening twice, orders from manufacturers who cut to the actual radius or angle, and sets the unit so the reveal is consistent on all sides, because an out-of-round arch is the first thing the eye catches.
Commercial Storefront Glazing
Storefront glazing covers the aluminum-framed glass systems you see on retail fronts, offices, and lobbies, where the glass is typically set into framing that carries the structural load. We handle replacement of fogged or cracked lites, upgrade of single-pane storefront to impact-rated or low-E glass, and full reframing when the existing aluminum has corroded in the coastal air. The work gets done on your schedule because we know a store with a plywood covering is losing money every hour.
Curtain Wall Systems
Curtain wall is the non-structural glass skin on larger buildings, hung from the structure instead of stacked in it, and it demands tolerances that residential glazing does not. We quote these only after verifying the original system’s anchors, gaskets, and drainage path, because a leak in a curtain wall shows up three floors below the source. TruePane works with the same manufacturers we use for residential work, which means the glass and the framing come from lines with warranty documentation we register in writing before the install.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, are the grille bars applied to the glass surface to replicate a true divided-lite look without the thermal penalty of individual panes. We match bar profile, width, and color to existing windows across the house, which matters in Pembroke Pines neighborhoods where one replacement window that does not match the rest is a visible repair. Architectural grilles can also be specified as true divided lites where the design calls for it, and we quote both options so you can see the cost difference in writing.
Oversized Glass Panels
Oversized glass panels are any lites too large or too heavy for a standard two-person set, commonly seen in picture windows, patio door transoms, and modern glass walls. These panels need engineering review on glass thickness, sometimes heat-strengthened or laminated makeup, and a setting crew that has handled the weight before. TruePane schedules oversized installs with the right equipment and the right number of trained hands, because a mishandled 300-pound lite is a danger to people and property alike.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom Windows & Doors
We are an authorized installer for, which means we can order directly from their architectural catalogs, and we register both warranty layers in writing when the job is done. With Pella we handle their Architect Series and Reserve lines for true custom shapes and SDL patterns; with Marvin we work through their Ultimate and Signature lines for oversized panels and curved-top units. Our installers train on the manufacturer’s recommended setting methods, not a one-size-fits-all approach, so the warranty stays intact from day one.
We also service Milgard and Jeld-Wen products regularly, including warranty work on existing units and replacement glass when the sash can be saved. Whether you have one of those four lines or any other make, we can quote it honestly. The brand matters less than the installation, and the installation is what we guarantee.
Signs You Need Custom Windows & Doors Right Now
- Fogged or hazy glass that will not wipe clean. A failed seal lets moisture between the panes and the fog is permanent; it will only get worse with South Florida humidity. On a custom-shaped window, the glass pack has to be ordered to the exact arc, which is why waiting rarely saves money.
- A door that binds at the top or drags on the threshold. Houses settle in Pembroke Pines, especially in areas with expansive soil, and a door that binds is telling you the frame is no longer square. A custom door can be fabricated to the actual opening dimensions, but only after we measure what the opening has become, not what it was.
- Visible daylight around the window frame or door jamb. If you can see light, water and air are getting through, and your cooling bill is paying for it. Custom sizing fixes the gap permanently instead of packing it with caulk that fails in a season.
- An opening that no standard replacement will fit. Older Pembroke Pines homes often have masonry openings set for jalousie or awning windows that big-box replacements don’t cover. A custom unit solves it the first time without resizing the rough opening or sacrificing glass area.
- Rot or corrosion at the sill or bottom rail. South Florida moisture attacks wood and uncoated aluminum quickly once the protective finish is breached. If the frame itself is failing, a custom replacement is the fix, and patching a rotten sill only buys months, not years.
Our Custom Windows & Doors Process - Step by Step
- 1
Measure and photograph every opening, twice. We measure once, then we measure again, and we photograph the existing conditions so the manufacturer order matches the actual site. Any discrepancy between the two measurements means we stop and verify a third time before anything is ordered.
- 2
Quote manufacturer lines side by side on paper. You get the options, the prices, and the differences in writing, with no pressure to pick the most expensive line. The goal is that you see exactly what you are buying, including the warranty durations for each manufacturer layer.
- 3
Order to written specification, confirmed in writing. The order goes in with your exact dimensions, glass package, finish, and hardware choices, and you get a copy of the confirmation. We don’t order from memory and we don’t let a distributor substitute without your approval.
- 4
Remove, set, seal, and square. On install day, uniformed, background-checked technicians remove the old unit, set the new one, shim it true, and seal it with materials rated for our climate. If the pane is not true, the job is not done, and we don’t leave until it is.
- 5
Register both warranty layers before the truck leaves. The manufacturer’s warranty and our workmanship warranty get registered in writing while we are still on site. You leave with documentation in hand, not a promise to “take care of it later.”
How Much Does Custom Windows & Doors Cost in Pembroke Pines?
A custom shape window in Pembroke Pines typically runs $800 to $2,800 per unit depending on glass package and complexity, while a full custom door system with sidelites and transom starts around $4,000 and can reach $12,000 or more for oversized glass and impact-rated construction. Commercial storefront glazing work is usually quoted per square foot of glass, and SDL upgrades add roughly $90 to $180 per window depending on the bar pattern. These are real ranges from jobs we have quoted in this market, not national averages that mean nothing on your street.
What moves the price: glass package (impact-rated costs more than standard), frame material, the size and weight of the lite, and whether the existing opening needs repair before the new unit goes in. The best way to avoid overpaying is to get the quote in writing with the line items separated, which is how we work from the first visit. Our free estimate includes the measurements, the manufacturer options with prices, and a written installation scope, so you compare apples to apples. Call (863) 208-6105 and we will bring the quote to your kitchen table.
Custom Windows & Doors Near Pembroke Pines - Our Service Area
We work throughout Pembroke Pines and the surrounding Broward County communities, including Miramar, Weston, Southwest Ranches, Cooper City, and Davie. Most custom window and door projects are scheduled within one to two weeks of the final measure, and we keep you posted on material lead times from the manufacturer. Whether you are in Country Club, Miami Lakes, or over toward Pembroke Park, the same crew, the same standard, and the same written warranty apply. See our home page for more on how we work.
Serving Pembroke Pines, FL - Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well, offering Affordable Custom Windows & Doors in Pembroke Pines, FL. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom Windows & Doors in Pembroke Pines
Custom windows and doors are units built to your specific dimensions, shapes, glass packages, and finishes, not pulled from a warehouse stock list. In Pembroke Pines they are most often needed for older homes with non-standard openings, architectural details like arches and hexagons, or projects where the homeowner wants specific glass performance and a matching sightline across the house. At TruePane, home of the Best Custom Windows & Doors in Pembroke Pines, FL, we quote the custom option side by side with standard alternatives so you can see the actual cost difference before committing.
Most custom orders take 4 to 8 weeks from final measurement to install day, depending on the manufacturer and the complexity of the unit. We tell you the lead time in writing when you place the order, and we do not schedule the install until the product is physically in our hands. If a manufacturer runs late, we tell you before the original date passes, not after.
As covered above, expect roughly $800 to $2,800 for a custom shape window and $4,000 to $12,000 or more for a full custom door system, with glass package and impact rating the biggest cost drivers. We give you a written quote with every line item separated, and the price we quote is the price you pay unless you change the scope. Call (863) 208-6105 for an exact quote; estimates are free.
Yes, we are an authorized installer for both and we regularly install, replace, and warrant their architectural and custom lines. We also work on Milgard and Jeld-Wen units, including warranty replacements for existing installations. If you know your product line, tell us when you call and we will bring the right catalogs and glass options.
If a window or door is broken or the opening is unsecured, call us any hour and a live person will answer, not a voicemail tree. We will walk you through temporary securement and schedule the measure as quickly as possible. Custom replacements for emergency openings are often fast-tracked through the manufacturer, but lead time depends on the unit.
Every job carries the Done Right Promise and The Keystone Standard: both the manufacturer’s warranty layers and our workmanship coverage are registered in writing before the truck leaves your driveway. You get the durations stated, in writing, and if something is not done right within the first 90 days, we make it right with no paperwork fight. That is the standard on the first visit and the baseline for every callback.
Clear the area around the opening, take down window treatments, and move furniture back at least six feet so the crew has room to work safely. Keep pets and children away from the work zone during the install. We protect floors with drop cloths and clean up the glass and old frame debris before we leave, which is part of the job, not an extra line item.
Schedule Your Custom Windows & Doors Service in Pembroke Pines Today
If you have an opening that standard sizes won’t fit, or a design you have been thinking about for years, call (863) 208-6105 and talk to a live person. We will measure, quote, and register every warranty in writing, and the estimate is free with no obligation. Done right the first time is the only way we work.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Pines since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.