Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterVLX 100 Bifold / Folding Door in Pembroke Pines, FL | TruePane Windows & Doors
The VLX 100 bifold door turns an ordinary wall into a 20-foot-wide opening that stacks neatly to the side. For homeowners across Pembroke Pines, FL, that means the line between your living room and your lanai, pool deck, or backyard garden simply disappears. TruePane Windows & Doors is an authorized ViewLux installation partner, so you get the genuine VLX 100 with warranty-safe installation handled by our own crew, not a subcontractor. Call (863) 208-6105 to schedule a free on-site measurement and see what this door costs for your specific opening.
Product Overview - VLX 100 Bifold / Folding Door
The VLX 100 is an accordion-style aluminum bifold door built for one purpose: wall-to-wall openings that create seamless indoor-outdoor living. Instead of a single large glass panel that slides behind another, the VLX 100 folds its panels like a book and stacks them flush against the jamb. You get nearly the full width of the opening, not half of it.
In Pembroke Pines, where pool decks and screened lanais are part of how we live, this configuration makes real sense. A 16-foot opening with a traditional slider only gives you about 8 feet of actual pass-through. The same opening as a VLX 100 bifold gives you almost the entire 16 feet. When you’re carrying food out for a Sunday cookout or watching the kids in the pool from the kitchen, that difference is not subtle.
What makes the VLX 100 worth considering over economy bifolds is the aluminum engineering. The frame uses a 0.098″ wall thickness and a 2.56″ profile width, which is heavier than you’ll find on budget systems. That mass translates into panels that don’t flex, sag, or bind over years of daily use. Hinges, rollers, and locks are sized for the weight of insulated glass units, not stripped down to hit a price point. We install this series in Pembroke Pines because it holds up to our humidity, our afternoon thunderstorms, and our hurricane season without developing the warps and sticking points that plague thinner frames.
If you’ve been researching bifold doors for a remodel, a new build, or a lanai conversion, the VLX 100 is the model we recommend most often. It’s the right intersection of build quality, configuration flexibility, and cost. Call (863) 208-6105 and we’ll walk you through it honestly, including the cases where it might not be the right fit for your home.
Technical Specifications
Here are the VLX 100’s specs as we spec and install it in Pembroke Pines:
- Wall thickness: 0.098″ extruded aluminum throughout the frame and panel rails
- Profile width: 2.56″ frame depth, giving the door a substantial architectural presence
- Maximum span: Up to 20 feet wide per opening, depending on panel count and glass weight
- Track configurations: 2-panel, 3-panel, 4-panel, 5-panel, or 6-panel layouts
- Glass options: Clear, Low-E, Tempered, Laminated, Gray Tint, or Black Tint
- Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, or Teak Wood
- Screen options: Retractable screen or no screen
- Sill options: Flush sill for zero-threshold transitions or raised sill for maximum water protection
Every dimension above is what we order, verify, and install for Pembroke Pines homes. No substitutions, no downgrades without your sign-off.
Performance Features
Thermal Efficiency
The VLX 100 uses a thermal break between the interior and exterior aluminum faces, and the insulated glass units are NFRC-rated. That means a cooler frame and less heat transfer through the glass during Pembroke Pines afternoons. If your bifold faces west or south, we’ll recommend Low-E glass in your quote.
Acoustic Performance
Aluminum is a sound conductor, but the VLX 100’s multi-chambered extrusions and properly glazed sealed units cut significant exterior noise. Homes near Pines Boulevard, University Drive, or the Turnpike notice the difference immediately. Laminated glass improves acoustic isolation further and is our standard recommendation for those lots.
Airtightness & Weather Seal
Every panel-to-panel joint and perimeter contact point uses compression gaskets and interlocking stiles. Combined with AAMA 812 low-expansion foam sealant around the full perimeter at installation, the VLX 100 performs well on airtightness testing. That keeps conditioned air inside where it belongs, a real consideration in South Florida cooling season.
Waterproofing
Intermittent drainage zones inside the frame redirect any water that gets past the outer weatherstripping back to the exterior. The sill design, whether flush or raised, includes a positive slope and end dams. We water-test every install before we leave the site. Given Pembroke Pines’ summer storm patterns, this is not optional.
Wind Resistance
The VLX 100 is wind-load rated for the requirements in Broward County and surrounding South Florida jurisdictions. Paired with impact-resistant laminated glass when needed, the system can be specified to meet High Velocity Hurricane Zone requirements. We’ll confirm the right glass package for your specific opening, exposure, and code zone during the estimate.
Security & Hardware
Multi-point locking at each panel meeting point, stainless steel rollers, and a robust track anchoring system mean the VLX 100 closes with real structural integrity. It’s not a flimsy interior room divider. These doors are engineered to be the exterior wall when closed.
Color & Glass Options
The VLX 100 comes in six finishes. Premium Black and Bronze are the most common choices for modern and transitional homes across Pembroke Pines, especially on west-facing elevations where they read as clean architectural lines. Pure White and Anodized Silver suit coastal, tropical, or contemporary aesthetics and remain cooler to the touch in direct sun. Champagne is a warmer metallic we recommend for Mediterranean-style homes, and Teak Wood gives a wood-look without the maintenance penalty of real timber in our humidity.
On the glass side, Clear is the economical choice for east and north exposures. Low-E is your daily driver in South Florida, reflecting solar heat while maintaining visible light. Tempered glass is standard for safety in doors by code. Laminated is the impact-rated option, giving you debris protection plus better acoustics, and we recommend it for any opening that will see storm exposure. Gray Tint and Black Tint cut glare and solar gain further, and Black Tint does a nice job of hiding the interior from outside view during the day.
Not sure what combination makes sense for your floor plan? Call (863) 208-6105 and we’ll bring samples to your Pembroke Pines home.
Installation by TruePane Windows & Doors in Pembroke Pines
A bifold door is only as good as its installation. We cannot overstate this. Fold 20 feet of glass and aluminum into a frame that’s out of level or out of square, and you’ll fight it every time you open or close it. Panels will scrape the sill, the lock points won’t line up, and the rollers will wear out years early. That’s before you even get to the water intrusion risks from a poorly sealed perimeter in a climate that gets 60-plus inches of rain a year.
TruePane Windows & Doors installs every VLX 100 to AAMA 2400/2410 installation standards. That starts with a full pre-install inspection of the rough opening, the substrate, and the existing structure. We check the header, the jack studs, and the floor conditions before any aluminum goes in. Then we set the frame level, plumb, and square, shimming as needed and anchoring per the manufacturer’s engineering. The perimeter gets AAMA 812 low-expansion foam sealant on every joint, plus a full flashing and waterproofing detail that ties into your home’s weather barrier.
After the panels are hung and adjusted, we run a full water test, cycle the door multiple times, adjust the hinges and locks, and clean the glass thoroughly. We also handle permit-ready documentation for Pembroke Pines building department requirements and can coordinate inspections if your project needs them.
One practical note: improper installation voids the manufacturer’s warranty on this door. That’s true of every other brand. Buying the right product and having it installed by a crew that does this daily in Pembroke Pines is the only way to protect your investment.
Frequently Asked Questions - VLX 100 Bifold / Folding Door
Typical lead time for the VLX 100 in Pembroke Pines is 4 to 6 weeks from final measurement and deposit to arrival at our shop, depending on the glass package and finish you select. Impact-rated laminated glass can add a week or so. Call (863) 208-6105 and we’ll give you a current lead time based on your exact configuration.
The VLX 100 may qualify for federal energy tax credits in the doors category if it meets the current ENERGY STAR criteria for the South Florida climate zone with the right Low-E glass package. Eligibility depends on the specific glass, the coating, and the year of installation. We’ll point you toward the current guidelines during your estimate and provide the documentation you need for your tax professional.
The VLX 100 carries a manufacturer’s warranty on the aluminum frame, glass seal, and hardware, with the specific terms dependent on the finish and glass options you choose. What matters equally is that TruePane Windows & Doors installs to the factory and AAMA standards so that the warranty remains intact, and we stand behind our labor as well.
The VLX 100 is configurable in panel count and width up to a 20-foot maximum span, but it is not custom-fabricated to arbitrary dimensions the way some premium European systems are. Each panel size falls within the manufacturer’s engineered range. During your free measurement, we’ll tell you exactly what fits your opening and which panel count gives you the cleanest look. Call (863) 208-6105 to schedule that measurement at your Pembroke Pines home.
Rinse the track and sill with fresh water every few months, wipe down the frame with mild soap and water, and keep the track free of sand, leaves, and debris. Once a year, inspect the weatherstripping and rollers and have them lubricated per the manufacturer’s recommendation. Aluminum frames never need painting or refinishing, which is a major advantage over wood in Pembroke Pines’ climate. We can handle that annual maintenance if you’d rather not.
Get a Quote - VLX 100 Bifold / Folding Door in Pembroke Pines
The best way to get a real number for the VLX 100 is to have us measure your actual opening. No guessing, no ballpark pricing that changes later. We’ll bring samples, spec your glass and finish, and give you a written line-item quote. Call TruePane Windows & Doors at (863) 208-6105 to schedule your free on-site measurement and start your project.
Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Pembroke Pines, FL and surrounding Broward County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
