VLX 100 Arched / Custom Door

VLX 100 Arched / Custom Door in Pembroke Pines, FL | TruePane Windows & Doors

Few entryways change the feel of a home like a true arched door. The VLX 100 Arched / Custom Door from ViewLux is a CNC-bent aluminum arched entryway, a curved architectural statement with structural precision that turns a standard front entrance into the defining feature of the house. In Pembroke Pines, we’re seeing more homeowners from SilverLakes to Chapel Trail move away from flat, builder-grade doors and toward custom radius profiles that match Mediterranean, Spanish Revival, and modern transitional architecture. TruePane Windows & Doors is an authorized ViewLux installation partner, which means you get the product, the install, and the warranty under one roof. Call (863) 208-6105 to talk about your opening and schedule a free measurement.

Call (863) 208-6105

Product Overview - VLX 100 Arched / Custom Door

The VLX 100 exists for one reason: most door manufacturers don’t do arches well. A curved top rail that’s formed by hand tends to be inconsistent. The radius drifts. The reveal lines don’t match. The door binds in the frame six months after install. ViewLux solved this with CNC-bent aluminum. The curve is cut and formed by machine to the exact radius your opening requires, so the finished door tracks the arch true at every point along the swing. That’s the difference between an arched door that looks right on day one and one that still operates correctly ten years later in a Pembroke Pines home.

The frame profile runs 2.56 inches wide with a wall thickness of 0.098 inches. That’s a substantial, rigid section that resists the twisting and sagging that plague thinner door systems. The max span is custom fabricated to order, so there’s no “standard sizes only” limitation. If your architect drew a 96-inch arched double entry with a transom, we can build it. If your 1970s Pembroke Pines ranch has an odd-size radius opening that three other companies said no to, the VLX 100 is the answer.

Buyers choose this series because it gives them a true custom architectural element without the maintenance profile of wood or the cheap feel of roll-formed aluminum. There’s no wood to rot in Florida humidity, no vinyl to warp under direct sun, and no steel to corrode from salt air. It’s a door system engineered for the specific demands of South Florida construction. And because TruePane Windows & Doors handles the install with AAMA-compliant methods, the engineering holds up the way the manufacturer intended.

Technical Specifications

• Frame wall thickness: 0.098 inches, a heavy-gauge aluminum extrusion built for structural rigidity
• Profile width: 2.56 inches, providing a slim sightline with a strong frame section
• Maximum span: Custom fabricated to order; no practical limit on width, height, or radius
• Material: CNC-bent 6000-series aluminum with thermally broken frame design
• Glass options: Clear, Frosted, Obscure, Low-E, Tempered, Laminated (impact-rated laminated available for Pembroke Pines wind-load requirements)
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Installation standard: AAMA 2400/2410 compliant, with AAMA 812 foam sealant at all perimeter joints
• Performance ratings: NFRC-rated thermal performance, tested airtightness and water penetration resistance, sound transmission ratings available on laminated glass configurations

Performance Features

Thermal Efficiency - The VLX 100 uses a thermal break in the frame, separating interior and exterior aluminum so heat doesn’t conduct straight through the metal. In Pembroke Pines, where the sun pounds east-facing entries from mid-morning to late afternoon, that break keeps the interior side of the frame from turning into a radiator. NFRC-rated energy performance means you can compare this door’s numbers against any insulated steel or fiberglass door on the market.

Acoustic Performance - Laminated glass configurations on the VLX 100 are tested for sound transmission reduction. If your Pembroke Pines home fronts a busy road like Pines Boulevard or Taft Street, or backs up to the Turnpike, a laminated glass pack can take the edge off traffic noise in a way a standard single-pane entry door simply cannot.

Airtightness & Weather Seal - Aluminum doors leak air at the joints when the weatherstripping is an afterthought. The VLX 100 is designed with continuous compression seals at the jambs, header, and sill. During our Pembroke Pines installs, we run AAMA 812 low-expansion foam around the entire rough opening perimeter, not just the gaps we can see. That foam seals the airflow paths that cause drafts, dust, and energy loss.

Waterproofing - In South Florida, a front door that leaks during a summer afternoon downpour is a call-back waiting to happen. The VLX 100’s sill and threshold system is built for water management, with positive drainage and a continuous seal strategy. TruePane installs the frame with shimmed, level, and plumb setting before the foam perimeter goes in, then we water-test the assembly. If water can find a path in, we find it first and fix it before the door is finished.

Wind Resistance - Pembroke Pines sits in a high-velocity hurricane zone. A large arched door is a big lever in a storm, and a frame that’s not anchored correctly becomes the weak point of the whole wall. The VLX 100’s 0.098-inch wall thickness and 2.56-inch profile width give it the rigidity to carry wind loads across a wide span. Our installation includes the structural anchoring required for the door to perform to its wind-load rating, not just the minimum code requirement.

Security & Hardware - An entry door is only as strong as the way it locks. The VLX 100 accepts multi-point locking hardware, and we recommend it for any wide-span arched door in Pembroke Pines. A single deadbolt at the latch point on a 72-inch door leaves the top and bottom corners vulnerable. A multi-point system locks the door to the frame at the header and threshold, distributing forced-entry resistance across the full height of the opening.

Color & Glass Options

The VLX 100 comes in six finishes, and the right choice depends on your home’s architecture. Premium Black is the most requested finish we sell in Pembroke Pines right now, particularly on modern and transitional homes where the entry needs to read as a deliberate architectural line. Pure White suits the classic South Florida look: white stucco walls, a bright front door that reflects heat, and a clean coastal feel. Anodized Silver is the honest-aluminum option, durable in direct sun and a natural match for gray or blue exterior palettes. Bronze gives you depth without going full black, works well on Tuscan and Spanish Revival homes, and hides fingerprints better than any other finish. Champagne is the warm neutral, somewhere between silver and bronze, and it flatters homes with cream or beige exteriors. Teak Wood is a wood-grain powder coat that gives you the look of a carved timber door with none of the maintenance.

Glass selection changes everything about the door. Clear glass maximizes natural light but offers zero privacy. Frosted glass scatters light and blurs the view, which makes sense if your entry opens directly toward a shared walkway in a Pembroke Pines HOA community. Obscure glass is similar but with a textured pattern that reads more decorative. Low-E coatings cut solar heat gain through the glass, which matters for west-facing entries. Tempered glass meets safety glazing code for doors with large lites. Laminated glass is the hurricane option, tested for impact resistance and available in configurations that meet Florida Building Code requirements for wind-borne debris zones.

Installation by TruePane Windows & Doors in Pembroke Pines

A door is a manufactured product. A door that performs is an installed product. The difference is everything, which is why TruePane Windows & Doors treats installation as the other half of the product spec. When we install a VLX 100 Arched / Custom Door in Pembroke Pines, the process looks like this:

Pre-install inspection. Before any old door comes out, we verify the rough opening dimensions against the door we fabricated. Arched openings introduce complexity: the radius has to match at the header, the jamb legs have to be plumb, and the sill has to sit on a level surface. We check all of it before we begin.

Level, plumb, and square setting. The frame is shimmed and fastened so that all four sides are true. An arched door that’s set even 1/8-inch out of square will bind at the top of the swing or leave a gap at the latch. We don’t rush this step.

AAMA 812 perimeter seal. We run low-expansion foam around the entire rough opening junction. This is not optional in our book. The foam is what stops air movement between the rough opening and the door frame, and it’s the layer that prevents condensation and mold from forming inside the wall cavity over years of humid Pembroke Pines weather.

AAMA 2400/2410 compliance. These are the installation standards for exterior doors and windows. They cover shimming, anchoring, flashing, sealing, and drainage. We install to them because that’s what the manufacturer warranty requires, and what Florida building inspectors look for.

Water test. We run water on the finished assembly before we leave. If there’s a leak path, we want to know about it while we’re still on site. It gets fixed before cleanup, not on a call-back.

Cleanup and walkthrough. The old door, the packaging, the debris all go with us. You get a walkthrough of the door’s operation, hardware functions, and maintenance notes.

One thing we’re blunt about with Pembroke Pines homeowners: improper installation voids the manufacturer warranty. A door that’s set out of square, anchored with the wrong pattern, or sealed with the wrong materials will not perform and the manufacturer will not cover the failure. That’s the practical reason to use an authorized partner like TruePane for this product rather than the lowest-bid handyman.

Frequently Asked Questions - VLX 100 Arched / Custom Door

What is the lead time for the VLX 100 Arched / Custom Door?

Fabrication time for a custom arched VLX 100 typically runs four to eight weeks from the date we finalize measurements and lock in the specification. Every door is cut to the radius of your actual opening, so there’s no shelf stock to pull from. We quote lead times up front in writing. Call (863) 208-6105 and we’ll give you a current production schedule for your job.

Does the VLX 100 qualify for energy tax credits?

Whether the VLX 100 qualifies for any given energy incentive depends on the glass package, the NFRC ratings on that configuration, and the tax credit requirements in effect at the time of purchase. Ask us during your estimate, and we’ll confirm whether your chosen glass option meets current threshold requirements. We’ll pull the specific NFRC data for your configuration, not a generic brochure number.

What warranty comes with the Arched / Custom Door?

The VLX 100 carries the manufacturer’s warranty on the frame and the finish, and TruePane Windows & Doors backs our installation workmanship in writing. The key requirement is that the door be installed by a qualified contractor to AAMA 2400/2410 standards. That’s what we do. Call (863) 208-6105 and we’ll walk you through the specific coverage terms before you sign anything.

Can I customize the size?

Yes. The entire point of the VLX 100 is that the maximum span is custom fabricated to order. The CNC bending process means the radius and the dimensions are cut to your opening, not adapted from the nearest standard size. Wide double entries, tall transom combinations, unusual radii, oversized doors: all possible. We’ll measure the actual opening in your Pembroke Pines home and fabricate to those dimensions.

How do I maintain aluminum frames?

Aluminum frames need little maintenance. Wash with mild soap and water, keep the track and sill clear of debris, and lubricate the hinges and the lock mechanism once a year. Don’t use abrasive cleaners or pressure washers on powder-coated finishes. The finish options on the VLX 100, particularly the powder coats like Premium Black and Bronze, are designed to hold up for years under Florida sun without waxing or resealing.

Get a Quote - VLX 100 Arched / Custom Door in Pembroke Pines

If you’ve been looking for an entry door that does what arches are supposed to do, let’s measure it. TruePane Windows & Doors will come out to your Pembroke Pines home, take the exact rough opening dimensions, and put a written quote in your hands with the door spec, the glass package, the finish, and the installed price. Call (863) 208-6105 to schedule your free on-site measurement and project quote. We’ll bring samples so you can see the finishes in person, in your light, at your door.

Written by the team at TruePane Windows & Doors, serving Pembroke Pines, FL and surrounding Broward County communities.