VLX 80 Fixed / Picture Window

VLX 80 Fixed / Picture Window in Pembroke Pines, FL | TruePane Windows & Doors

The VLX 80 Fixed / Picture Window is what you choose when the view matters more than anything else. It’s a non-operable, floor-to-ceiling glass wall built into a slim aluminum frame that gets out of the way. No cranks, no sashes, no visible hardware. Just glass. Homeowners across Pembroke Pines use this window for lakefront sightlines, pool-facing walls, and any room where you want daylight without compromise. TruePane Windows & Doors is an authorized ViewLux installation partner, which means you’re buying the product through a local team that actually installs it, measures it, and stands behind it. Call (863) 208-6105 and we’ll walk you through pricing for your specific opening.

Call (863) 208-6105

Product Overview - VLX 80 Fixed / Picture Window

ViewLux designed the VLX 80 series for one purpose: maximum glass, minimum frame. The fixed panel version is the purest expression of that idea. Because it doesn’t open, there’s no operator, no lock rail, no movable sash interrupting the sightline. What you get is an uninterrupted sheet of glass up to 120 inches wide, held in a frame that’s only 1.97 inches deep. That’s the “maximally glazed” concept in practice.

Where does this window fit? We’ve installed it as a centerpiece above kitchen sinks looking into backyards in Silver Lakes, as a full-height front picture window in Chapel Trail, and as a three-panel fixed wall in Pasadena Lakes homes where the pool deck deserves to be seen from the family room. It’s also used hard in commercial storefront work across Pembroke Pines, where the slim sightline reads clean from the street.

The frame is extruded aluminum with a wall thickness of 0.079 inches. That’s thick enough for long spans and Florida wind loads, but slim enough to disappear visually. Aluminum won’t warp, rot, or swell in South Florida humidity the way wood and some vinyl profiles do. And because it’s a fixed unit, there are fewer moving parts to wear out. Buyers choose the VLX 80 over the VLX 60 or 40 series when they want a larger glass area and a more substantial frame for bigger openings. With TruePane Windows & Doors, you’re working with an authorized partner that orders direct from installs to warranty spec in Pembroke Pines every week.

Technical Specifications

Here’s what you’re getting with the VLX 80 Fixed window. We’ve reworded the factory specs so they’re useful, not just marketing copy:

• Frame depth: 1.97 inches, slim-profile aluminum extrusion
• Wall thickness: 0.079 inches, engineered for long spans and wind resistance
• Maximum width: up to 120 inches wide, ideal for panoramic walls
• Operation: fixed (non-operable), no visible hardware
• Glass types: Clear, Frosted, Low-E, Tempered, Laminated, Gray Tint, Black Tint
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Performance: Thermal break technology with NFRC-rated energy performance
• Installation standard (ours): AAMA 2400/2410, with AAMA 812 low-expansion foam on every perimeter joint

The short version: this is a large-format fixed window that can span most living room walls in a single panel. Call (863) 208-6105 if your opening is an unusual size and you want to know if you can avoid a mullion.

Performance Features

Thermal Efficiency: The VLX 80 series runs a thermal break through the aluminum frame, separating the interior and exterior metal so heat doesn’t conduct straight through. Add Low-E glass and you’ve got an NFRC-rated system that keeps Pembroke Pines cooling bills in check, even with a full wall of west-facing glass.

Acoustic Performance: A fixed window is quieter than an operable one by design. No gaps around a movable sash. Pair the VLX 80 with laminated glass and you’ll cut road noise from Pines Boulevard or I-75 significantly. We’ve had customers in Pembroke Lakes mention the difference the first evening after install.

Airtightness & Weather Seal: Every perimeter joint gets AAMA 812 low-expansion foam sealant during our installation. That’s the standard that prevents air leaks, keeps humidity from sneaking in around the frame, and stops the damp musty smell you sometimes get with older aluminum frames in South Florida.

Waterproofing: The fixed design gives water very few entry points, but the real waterproofing happens at install. TruePane Windows & Doors tapes and seals the rough opening, then foam-seals the frame perimeter. The window itself is factory-tested for water penetration, but the field installation is what keeps the drywall dry.

Wind Resistance: We’re in a High Velocity Hurricane Zone. The VLX 80 is wind-load rated when glazed with impact-resistant laminated glass. That’s the configuration required for most new construction and major remodels in Pembroke Pines under Miami-Dade County building code.

Security & Hardware: Fixed windows are inherently harder to break into than sliding or casement windows because there’s no latch or track to jimmy. Add laminated safety glass and the panel stays intact even when struck hard. No visible hardware also means no exposed fasteners or disassemblable parts from the outside.

Color & Glass Options

The VLX 80 comes in six finishes. Premium Black is the top seller in Pembroke Pines right now, especially on modern and contemporary homes in Silver Lakes and Chapel Trail. Pure White is the classic choice for coastal and traditional facades; it blends with trims and reads light. Anodized Silver has a raw metallic look that suits mid-century and commercial storefronts. Bronze is warmer and works well on Tuscan or Mediterranean-style homes that are common west of Flamingo Road. Champagne is for high-end interiors; it’s subtle and soft against neutral walls. Teak Wood is a wood-look aluminum finish that gives you the warmth of timber without rot or termite risk in Florida humidity.

Glass is where you dial in performance. Clear floats maximum light, best for north-facing walls. Low-E rejects solar heat, the clear choice for east and west exposures that bake in the Pembroke Pines sun. Frosted gives privacy for bathroom or street-facing installations without sacrificing daylight. Tempered is required by code for windows near doors, floors, and wet areas. Laminated is impact-grade, the configuration we recommend for hurricane protection. Gray Tint and Black Tint cut glare and add exterior privacy, often used on modern black-framed homes for that high-contrast look.

Installation by TruePane Windows & Doors in Pembroke Pines

Here’s the thing most homeowners don’t catch until it’s too late: a window is only as good as its installation. We install the VLX 80 in Pembroke Pines regularly, and we’ve torn out enough botched jobs from other crews to know exactly what goes wrong. An out-of-square opening twisted into place, a skipped foam seal, a missing water test. Any of those voids the manufacturer warranty and you’ll be chasing leaks for years.

Our process starts with a pre-install inspection. We measure the rough opening in three places, check for water damage or dry rot around the existing frame, and confirm the opening is square before the new window ever leaves the warehouse. Then the old unit comes out, the opening gets prepped, and the VLX 80 gets set level, plumb, and square. That’s not a slogan; that’s three separate checks with a laser level before we fasten anything.

Every perimeter joint gets AAMA 812 low-expansion foam. We don’t substitute caulk, we don’t skip corners, and we don’t shim with scrap wood. The visible joint gets taped and sealed per AAMA 2400/2410 installation standards. After install, we run a water test on the perimeter and inspect the interior wall for any sign of moisture intrusion. Finally, we haul off the old window, debris, and packaging, and walk you through the glass and hardware before we leave.

In Pembroke Pines specifically, two things matter most. First, the humidity: improper sealing leads to interior condensation and mold on the drywall below the window within two or three years. Second, wind: we’re under Miami-Dade wind-load requirements. An improperly anchored picture window in a storm isn’t just a leak; it’s a missile. Our installation method anchors the frame per the manufacturer’s engineering schedule, using fasteners that penetrate into the structure, not just the surrounding trim.

Call (863) 208-6105 to schedule a site measurement. We’ll give you a written, line-item quote the same visit.

Frequently Asked Questions - VLX 80 Fixed / Picture Window

What is the lead time for the VLX 80 Fixed / Picture Window? The VLX 80 is a made-to-order product from and lead time runs about 3 to 6 weeks depending on finish and glass selection. Black and White frames in stock glass configurations move fastest. Custom sizes or specialty glass (laminated, tinted) can push the order to the longer end of that range. We’ll give you a firm lead time in writing when we quote. Call (863) 208-6105 and we’ll check current factory schedules.

Does the VLX 80 qualify for energy tax credits? Yes, when you select Low-E or impact-resistant glass, the VLX 80 typically meets the ENERGY STAR criteria for the South Florida climate zone, which is the threshold for the federal residential energy efficiency tax credit. We can point you to the specific NFRC rated glass package for your project and give you the documentation to file with your tax return. Call (863) 208-6105 and we’ll pull the ratings sheet.

What warranty comes with the Fixed / Picture Window? ViewLux provides a manufacturer’s warranty covering the frame, glass seal, and finish against manufacturing defects. The warranty only remains valid if the window is installed by an authorized partner following their installation procedure, which is why TruePane Windows & Doors installs to AAMA 2400/2410 standards and uses AAMA 812 foam on every perimeter joint. We’ll give you a copy of the full warranty when we quote. Call (863) 208-6105 for details specific to your order.

Can I customize the size? The VLX 80 is made-to-order, so yes, every window is cut to your exact rough opening. The maximum span for a single fixed panel is 120 inches wide. Wider openings use multiple panels joined with a structural mullion. We measure every opening ourselves in Pembroke Pines before ordering, so the window fits flush, not shimmed and stuffed. Call (863) 208-6105 to get your opening measured.

How do I maintain aluminum frames? Wipe the frame with a mild soap and water solution every few months. Clean the track drainage slots if you have them. Check the exterior sealant bead annually for hairline gaps and recaulk if you see one. Don’t use abrasive cleaners or pressure washers on the finish; both can strip the coating. In Pembroke Pines, the main issues are salt air and sun exposure. The anodized and powder-coated finishes hold up well, but we recommend inspecting the perimeter seal before and after hurricane season. Call (863) 208-6105 anytime if you want one of our techs to inspect your install.

Get a Quote - VLX 80 Fixed / Picture Window in Pembroke Pines

You’re likely pricing this window for a real project. We’ll give you a written line-item quote with the exact glass, finish, size, and installation scope. No change orders and no vague allowances. Call TruePane Windows & Doors at (863) 208-6105 now to schedule a free on-site measurement in Pembroke Pines. The quote is free, and you’ll have it in hand before we leave.

Written by the team at TruePane Windows & Doors, serving Pembroke Pines, FL.