VLX 80 Casement Window

VLX 80 Casement Window in Pembroke Pines, FL | TruePane Windows & Doors

The VLX 80 Casement Window is a side-hinged aluminum window built for homeowners who want a clean, modern opening with as much glass and airflow as possible. It swings outward on a vertical hinge, which means the entire sash opens, not just a section of it. That makes it a top pick for Pembroke Pines kitchens, living rooms, and anywhere you want to catch the afternoon cross-breeze. TruePane Windows & Doors is an authorized ViewLux installation partner, so when you buy this window through us, you’re getting the product backed by a team that measures, orders, and installs it correctly, per AAMA standards, here in Broward County. Call (863) 208-6105 to schedule a free measurement.

Call (863) 208-6105

Product Overview - VLX 80 Casement Window

Casement windows have one job they do better than almost any other style: they move air. Because the sash opens fully outward, the window acts like a scoop that catches side breezes and directs them into the room. If you live in Pembroke Pines and you’re tired of rooms that feel stuffy even with the AC running, this is the window style that fixes it.

The VLX 80 series from ViewLux is a side-hinged aluminum casement with ultra-narrow sightlines and maximum ventilation. What “ultra-narrow sightlines” means in practice is this: the aluminum frames are engineered to be as slim as structurally possible, so more of the opening is glass and less of it is metal. The visual effect is a window that looks like a glass panel with a thin border. That’s the aesthetic modern and contemporary homes in Pembroke Pines and western Broward tend to favor, clean lines, fewer visual interruptions, more natural light.

Aluminum is the frame material for a reason. It doesn’t warp, rot, or swell the way wood does in Florida humidity. It doesn’t get brittle like old vinyl after years of UV exposure. The profile width on this unit is 1.97 inches, and the wall thickness is 0.079 inches. Those numbers matter because they give the window its rigidity. In a hurricane-prone region, a window that stays square under wind load is a window that keeps water on the outside where it belongs.

Buyers choose the VLX 80 Casement when they want a window that looks sharp, opens wide for ventilation, and doesn’t require constant maintenance. It’s popular for hard-to-reach areas too, like over a kitchen sink, where a crank-operated casement is far easier to open than a double-hung you have to lift.

Technical Specifications

Here’s the VLX 80 Casement Window broken down by the numbers and options, in plain terms. These are the specs you’ll be choosing from when we put together your order in Pembroke Pines.

• Frame material: Aluminum with thermal break
• Wall thickness: 0.079 inch
• Profile width: 1.97 inches
• Operation: Side-hinged casement, crank or push-out
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated (impact-rated available)
• Exterior finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed Screen, Retractable Screen
• Sill options: Standard Sill, Low-Profile Sill
• Performance compliance: NFRC-rated thermal performance, AAMA 2400/2410 installation standards, AAMA 812 perimeter sealant

Every VLX 80 we order for a Pembroke Pines project is sized to your exact rough opening. We don’t work from “close enough” measurements, and we don’t pad the frame with trim to hide gaps. The window is made for the hole in your wall, not the other way around.

Performance Features

Thermal Efficiency
Aluminum conducts heat, which is why thermal break technology exists. The VLX 80’s frame is split by a non-conductive barrier that stops outside heat from traveling through the metal and into your home. Combined with Low-E glass, this window carries an NFRC rating that matters in a Pembroke Pines summer, where your AC is already working hard enough.

Acoustic Performance
If your home in Pembroke Pines sits near Pines Boulevard, University Drive, or I-75, you know what road noise does to a room. The VLX 80’s multi-chamber aluminum profile plus laminated glass option reduces sound transmission noticeably. Laminated glass has a plastic interlayer that dampens vibration, and it’s the same glass that gives you impact protection. One upgrade solves two problems.

Airtightness & Weather Seal
A window can have great glass and still leak air around the sash if the weatherstripping is weak. The VLX 80 Casement uses a compression seal design. When the sash closes, the weatherstripping compresses against the frame on all four sides. Casement windows naturally seal tighter than sliding windows because the locking mechanism pulls the sash inward under mechanical force, not gravity.

Waterproofing
Florida rain doesn’t fall straight down. It comes at you sideways in a summer storm. The VLX 80’s drainage channels are built into the frame, so any water that gets past the first seal is channeled out through weep holes at the bottom sill, not into your wall cavity. During installation, TruePane applies AAMA 812 low-expansion foam sealant on every perimeter joint, which is the standard for preventing water intrusion around the frame itself.

Wind Resistance
Pembroke Pines sits in a High Velocity Hurricane Zone, and windows installed here need to handle real wind loads. The VLX 80 Casement is wind-load rated for our local climate requirements. When you add laminated impact glass, the window is designed to take a direct hit from wind-borne debris without shattering into the room. That’s a code requirement for many Pembroke Pines homes, and it’s also just common sense.

Security & Hardware
Casement windows are inherently hard to force open from the outside. The locks are embedded in the frame, and the sash opens outward, so there’s no way to pry it upward from the exterior. The VLX 80’s multi-point locking hardware secures the sash at multiple points along the frame, not just one latch in the middle. That’s a real security advantage over sliding windows.

Color & Glass Options

The VLX 80 comes in six exterior finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood. In Pembroke Pines, black frames are having a moment, especially on modern farmhouse and contemporary builds. Pure White works well on traditional Florida ranch homes where the window shouldn’t compete with the architecture. Anodized Silver is the classic commercial look, clean and neutral. Bronze and Champagne lean warmer and pair nicely with beige and travertine exteriors, which are still common across Pembroke Pines. Teak Wood is for the homeowner who wants a wood look without wood maintenance.

Glass is where the window earns its keep. Low-E is the smart default for Florida, it cuts heat gain while keeping visible light. Tempered glass is required in certain locations by code, like windows near doors or close to the floor. Laminated is your impact option, and it’s the one we recommend most often in Pembroke Pines for windstorm protection and sound control. Frosted glass gives you privacy without blinds for bathrooms and side yards. Clear is the most affordable option and works fine in shaded areas or north-facing walls.

Installation by TruePane Windows & Doors in Pembroke Pines

Here’s something most window salespeople won’t tell you: the window is only half the project. A $1,500 window installed badly leaks more than a $600 window installed right. That’s why TruePane Windows & Doors treats installation as part of the product, not an afterthought.

Every VLX 80 we install in Pembroke Pines starts with a pre-install inspection. We check the rough opening for square, for rot, for moisture, for any framing issues that would compromise the new window before we order or install it. If the opening isn’t right, we tell you before we’re three days into a project, not after.

Then the window goes in level, plumb, and square. Those aren’t buzzwords, they’re the difference between a sash that opens smoothly for twenty years and one that binds in year three. We set the frame with shims at the load points, fasten through the frame per AAMA 2400/2410 installation standards, and seal the entire perimeter with AAMA 812 low-expansion foam sealant. That foam does two jobs: it seals air and water out, and it locks the frame rigid in the opening.

After the window is set and sealed, we run a final water test and walk the project with you before we call it done. We clean up our mess, every time. That part shouldn’t need saying, but in Pembroke Pines we’ve seen enough torn-up lawns and caulk smears on stucco to know it does.

One more thing worth saying directly: if you buy the VLX 80 from a reseller and have it installed by someone who doesn’t follow AAMA standards, the ViewLux warranty on the window can be voided. Warranty claims get denied every day because of bad installs. Buying from TruePane Windows & Doors, an authorized partner, means the product warranty and the installation workmanship are both covered by people who stand behind them.

Frequently Asked Questions - VLX 80 Casement Window

Get a Quote - VLX 80 Casement Window in Pembroke Pines

If you’re planning a window replacement in Pembroke Pines, start with a real quote, not a ballpark over the phone. We’ll come out, measure your openings, walk you through glass and finish options with actual prices, and give you a written line-item quote. No pressure, no change orders later. Call (863) 208-6105 to schedule your free on-site estimate with TruePane Windows & Doors.

Written by the team at TruePane Windows & Doors, serving Pembroke Pines, FL.