Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Sliding & Patio Doors in Pembroke Pines: What to Know First
We provide independent CWS sliding and patio door repair, replacement, and installation across Pembroke Pines, and most jobs are completed in a single visit once we’ve confirmed the parts. As an independent CWS service provider, we’re not bound by any manufacturer script, which means we give you a straight answer on whether a door is worth repairing or should be retired. Typical CWS repair work in Pembroke Pines runs from $225 to $780 depending on what failed, and you’ll get the full number in writing before we touch anything. Call (863) 208-6105 and a live person will answer, day or night.
This page is for homeowners who own a CWS sliding or patio door and want it fixed properly, not patched. We’ll walk through how these doors actually fail in South Florida, what it costs to put them right, and why Dale Kessler built TruePane Windows & Doors specifically for this kind of work.
How CWS Products Fail, and How We Fix Them
Every brand has its habits. CWS sliding doors are no exception, and after years of working on them in Pembroke Pines and across western Broward County, we know exactly where they break first.
- Roller assembly collapse on the CWS 8600 slider. The original rollers on this line tend to flatten over time, especially in homes where the door faces west and catches the full afternoon sun. The door gets heavy, the panel drags, and eventually the wheel housing cracks. We replace the assembly with a stainless-steel roller rated for the panel weight, not a generic nylon wheel that will flatten again in two summers.
- Track wear on multi-panel CWS telescoping units. Telescoping doors carry more glass per panel than standard sliders, and when one panel starts binding, the interlocking rails chew up the bottom track. Homeowners often think the entire frame needs to come out. It usually doesn’t. We can machine the track back true or install a track cap, saving you the cost of a full tear-out.
- Weatherstripping failure on CWS picture-slider combinations. The fixed panel on a CWS picture-slider uses a compression gasket that shrinks in Florida heat and humidity. You’ll feel a draft at the meeting rail, or see daylight through the corner. We replace it with a closed-cell gasket that holds its shape, then run a water test before we leave.
- Handles and mortise locks wearing loose on older CWS patio doors. The multipoint lock can wear at the gearbox, leaving the handle floppy or the door stuck half-thrown. CWS hardware varies by production year, so we confirm the exact generation before ordering. If OEM hardware is discontinued, we’ll tell you that plainly and present a quality aftermarket option with the same throw pattern.
- Fogged glass in CWS insulated units. Seal failure shows up on the patio door side first, because that’s the panel catching the most sun and the widest temperature swing. If the frame is still sound, we can replace just the insulated glass unit and get the door back to clear without a full frame replacement.
If you own a CWS door in Pembroke Pines and the symptom doesn’t match any of these, call (863) 208-6105. We’ll ask the right questions and tell you over the phone whether it’s worth a service visit.
Our CWS Sliding & Patio Doors Process
Here’s what happens when you call us about a CWS door, from first ring to final cleanup.
- 1
The call. A live person answers, takes notes on the door’s age, model if you can find it, and exactly what it’s doing wrong. We schedule the visit when a uniformed, background-checked technician can be there, and we show up when we say we will.
- 2
Diagnostics. The technician measures the door, inspects the rollers, track, weatherstripping, and hardware, and figures out the root cause instead of treating the symptom. We measure every opening twice.
- 3
The straight answer. We tell you on the spot whether it’s a repair or a replacement decision, with the reasoning laid out in plain language. No pressure, no upsell.
- 4
The parts decision. For CWS specific hardware we source OEM parts where the production year supports them. Where OEM has been discontinued or was a weak point to begin with, we offer a proven aftermarket alternative and explain the difference on paper.
- 5
The work. We complete the repair or installation, then cycle the door at least a dozen times, test the lock, check the seal, and run water if we touched the weatherstripping. If the pane is not true, the job is not done.
- 6
The guarantee. We register both manufacturer warranty layers in writing before the truck leaves your driveway, state the durations, and back the workmanship with our Done Right Promise. If it’s not done right, we make it right.
What CWS Sliding & Patio Doors Costs in Pembroke Pines
Here’s the honest range for common CWS work we see in Pembroke Pines. These are the numbers we quote before the job starts, and they don’t change once the work begins.
| CWS Job | Typical Range |
|---|---|
| Roller assembly replacement (single panel) | $225 - $340 |
| Track repair or track cap (per panel) | $310 - $580 |
| Weatherstripping replacement (full door) | $180 - $295 |
| Multipoint lock or handle replacement | $240 - $450 |
| Insulated glass unit replacement | $480 - $780 |
| Full CWS slider replacement (installed) | $1,400 - $3,200 |
What moves the price is panel size, glass type, and whether the frame itself is still square and true. We’re also honest about when a repair doesn’t make sense: if the frame is compromised and the panel is twenty years old, you’re not saving money by replacing the rollers. Call (863) 208-6105 for a free written estimate on any CWS door in Pembroke Pines.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for CWS Work
We’re a second-generation glazier shop, not a franchise, and the difference shows up the first time we hand you a written quote with both warranty layers spelled out. TruePane Windows & Doors has served South Florida since 2008, and Dale Kessler started this company with one rule on the whiteboard: if the pane is not true, the job is not done. Our technicians know CWS doors the way a mechanic knows a particular model year, which means we show up already familiar with the weak points we’re there to fix.
When a CWS door is beyond saving, we don’t leave you guessing. We quote replacement lines side by side on paper, including Andersen, Pella, and PGT, so you can see exactly what you’re buying. Most jobs are completed in a single visit, every job is covered by our Done Right Promise, and someone picks up the phone 24/7. In Pembroke Pines, that matters, especially in August when a stuck patio door turns the living room into a greenhouse.
FAQs
No, not when the work is done correctly and documented. As an independent CWS service provider, we protect your warranty position by using OEM parts where they’re still available and by documenting the work so the paper trail holds up. If a repair cannot be made without affecting the warranty, we’ll tell you before the work starts.
Most CWS service calls in Pembroke Pines are scheduled within a few days, and once the parts are confirmed, the job is usually finished in a single visit. A live person answers the phone around the clock, so you’ll never wait on a callback form. For an exact appointment window, call (863) 208-6105.
It varies by production year. Some CWS hardware lines are still in production and OEM parts are easy to source. Others have been discontinued, and that’s where our experience matters: we’ll find a quality aftermarket part that matches the original throw pattern and load rating, and show you the difference on paper before we install it. No surprises.
The honest answer depends on the frame. If the frame is square and the track is holding, a roller or hardware repair gets the door back in service for a few hundred dollars. If the frame is out of true or the glass has failed and the door is past twenty years old, replacement is usually the smarter long-term move. We’ll give you the real recommendation, not the one that makes the bigger sale. Call (863) 208-6105 for a straight answer and a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.