Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Window Replacement in Pembroke Pines: What to Know First
We replace CGI windows throughout Pembroke Pines as an independent CGI service provider, and most replacement jobs are completed within five to seven business days of a signed estimate. A typical full-frame CGI window replacement in this area runs between $900 and $2,400 per opening depending on the series, size, and whether you’re staying with impact-rated glass or easing back to a standard laminated unit. If you own a CGI product and a window has failed, call (863) 208-6105 and we’ll give you a straight answer on whether it’s a repairable sash, a full replacement, or something in between.
This page is for CGI owners in Pembroke Pines who want to know what failed, what it’ll cost, and who can fix it without voiding a warranty that’s still worth something. That’s the conversation we have every week in this city.
How CGI Products Fail - and How We Fix Them
CGI builds a solid impact window, but every product line has its habits after ten or fifteen years in South Florida. Here’s what we see most in Pembroke Pines homes, series by series.
- CGI Sentinel Series - failed thermal seal with intact impact glass. The Sentinel line shows up in a lot of mid-2000s Pembroke Falls and SilverLakes homes, and the most common complaint is fog between the panes. The glass itself is still laminated and impact-rated, so the fix is a glass pack replacement rather than a full frame tear-out. That keeps the existing frame and stucco work intact and costs about half of a full replacement.
- CGI Estate Collection - sagging sash on wide picture-window units. These are heavy windows, and we see the lower sash start to drag when the original plastic glides wear flat against the track. It binds in July, opens hard, and eventually the owner stops opening it altogether. We replace the glides, check the frame for racking, and rehang the sash so it travels the way CGI intended.
- CGI Targa Series - perimeter seal breakdown at the bottom corners. In Pembroke Pines, this is often a drainage issue as much as an age issue. The Targa’s perimeter gasket can pull away where the frame meets the stucco opening, letting moisture sit against the frame. Water finds its way down, the corner seal fails, and you get a soft leak that only shows up in a hard summer storm. We pull the window, replace the seal, correct the flashing, and reset it in a properly shimmed opening.
- CGI Classic Line - operator hardware stripping on casement windows. The crank mechanism on older CGI casement windows uses a gear-driven operator that strips after enough forced operation. The window still locks, but it won’t open smoothly, and forcing it breaks the gear further. We source heavy-duty replacement operators and realign the sash so the hardware is not fighting the frame.
- CGI Fixed/Architectural units - stress cracks from structural settling. A hairline crack that runs corner to corner on a fixed CGI unit is almost never a glass defect. In Pembroke Pines, clay soil movement and settling over a few decades puts pressure on the frame, and a rigid impact unit will crack before it flexes. The right fix is correcting the framing before resetting the glass. Skip that step and the next window goes the same way.
Our CGI Window Replacement Process
Every CGI job follows the same order of operations, from the first phone call to the final walkthrough.
- 1
We listen to the symptom. A fogged pane, a binding sash, a leak that shows up with the wind - each points to a different fix. We’ll ask targeted questions about when it started and what makes it worse before we ever schedule a truck roll.
- 2
We measure the opening twice. That old rule about measuring twice never gets skipped on a CGI window. Impact-rated frames are unforgiving if the rough opening is out of square, so we confirm both dimensions and the diagonal before ordering anything.
- 3
We price OEM and quality aftermarket parts side by side on paper. If the warranty is still live, we spec CGI parts and follow the manual. If the window is out of warranty, we give you both options with the cost difference written down so you can decide with your eyes open.
- 4
We remove the old unit and correct the rough opening. Shims, flashing, and sealant done properly, not quickly. This is where most replacement jobs go wrong, and it’s the step we never rush.
- 5
We set the new window, check the reveal, and operate it. Level, plumb, square, and true. We run the sash up and down or swing the panel open and closed several times before we call it set.
- 6
We register both warranty layers in writing and walk you through the work. You receive the completed warranty paperwork before our truck leaves the driveway. If something is not right, the Done Right Promise means we return and make it right - no paperwork fight, no argument.
What CGI Window Replacement Costs in Pembroke Pines
| Job Type | Typical Range in Pembroke Pines |
|---|---|
| Glass pack replacement (failed seal, intact frame) | $450 - $850 per window |
| Insert window replacement into existing frame | $700 - $1,600 per window |
| Full frame replacement, standard laminated | $900 - $1,800 per opening |
| Full frame replacement, impact-rated CGI spec | $1,400 - $2,400 per opening |
| Casement operator and hardware replacement | $180 - $400 per window |
What moves the price is the series, the size of the opening, whether we’re keeping impact glass, and what we find when the old unit comes out. If the rough opening has water damage or the framing has shifted, that work gets priced before we order glass - never as a surprise line item after the fact. Call (863) 208-6105 for a free estimate. We’ll give you a written number, not a ballpark.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for CGI Work
We’re the company CGI owners in Pembroke Pines call when they want an honest diagnosis before they hear a price. Dale Kessler grew up in Pembroke Falls, learned the trade at McFatter Technical College in Davie, and has spent the better part of three decades setting and replacing impact glass in western Broward County. Our technicians know CGI’s frame profiles and hardware quirks because we’ve been working on them since they started showing up in neighborhood after neighborhood. If a CGI window is not the right answer for your opening - whether the frame is too far gone or the line has been discontinued - we’ll say so, and we’ll quote Andersen, Pella, or PGT side by side instead. The Keystone Standard means both warranty layers get registered in writing, and the Done Right Promise means we stand behind the work without making you fight for it. We’ll be there when we say.
FAQs
No, not if the replacement is done correctly and with parts appropriate to the remaining warranty terms. As an independent CGI service provider, we follow CGI’s published specifications when the warranty is active, and we register the new warranty layers in writing before we leave. If your CGI warranty is still live, we’ll walk you through exactly what it covers before any work begins. Call (863) 208-6105 and we’ll confirm what’s still on paper.
If the frame is square, the sash operates, and the only problem is fog or a broken seal, a glass pack replacement is usually the right fix. If the frame is warped, the sash won’t close against the weatherstripping, or the glass crack runs into the frame itself, you’re looking at a full replacement. We’ll tell you which one you have before we quote anything. Call (863) 208-6105 for an inspection and a written answer.
Most CGI series still have OEM parts available, but lead times on certain hardware and extrusions can stretch three to six weeks. For out-of-warranty windows, we often recommend a quality aftermarket part that matches the original spec and costs less. We’ll show you both options on paper with the prices and the lead times, and you decide. Call (863) 208-6105 and we’ll check availability for your specific series.
Once we have the correct glass or hardware in hand, most single-window CGI replacements are done in a day. Full multi-window jobs typically take two to four days depending on the number of openings and what we find when the old units come out. We’ll give you a schedule in writing before we start. Call (863) 208-6105 to get your project on the calendar.
In most cases, yes. CGI’s frame profiles and glass tints have stayed consistent across certain series, so a single replacement usually matches the neighbors well enough that nobody can pick it out. The exceptions are older Series that have been redesigned or discontinued, and in those cases we’ll show you the closest match before we order. Call (863) 208-6105 and we’ll tell you what’s possible for your specific window.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.