Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Davie
Door installation in Davie almost always means a full-frame tear-out, not a panel swap. The town’s 1960s through 1980s ranch and equestrian homes still carry original aluminum jalousie and single-pane sliders that predate Florida’s High-Velocity Hurricane Zone code, and Broward County won’t permit a repair on a unit with no Miami-Dade Notice of Acceptance. That’s the reality we work with every week. TruePane Windows & Doors has served Davie homeowners long enough to know which streets off Flamingo Road and Orange Drive hide non-standard rough openings, and we quote the full scope in writing before a single component gets ordered. Call (863) 208-6105 for a free estimate, and a live person will answer.
Why TruePane Windows & Doors Is Davie’s Preferred Door Installation Company
We’re not the cheapest bid in Davie, and we won’t pretend to be. We’re the company homeowners call after a previous contractor installed a door that binds in July or left a fogged seal on a “new” slider. Dale Kessler founded TruePane in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. That’s why our Davie customers get something most companies won’t put in writing: both manufacturer warranty layers registered before our truck leaves the driveway, durations stated, plus a Done Right Promise that says if it’s not right, we make it right. No paperwork fights. No arguing.
Our technicians are background-checked, uniformed, and trained to measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you’re buying. And when you call Davie at 2 a.m. with a door that won’t close after a storm, a live person answers. Not a voicemail tree. Not a regional call center. A person who can dispatch a crew to Davie.
Our Door Installation Services in Davie
We install the full range of entry, patio, and specialty doors for Davie homes, with most jobs completed in a single visit. Here are the four most common service types we handle for Davie homeowners. Whether it’s a standard swing door on a CBS ranch or a custom bifold opening to a back pasture, our Door Installation team starts with one rule: measure the rough opening twice, then verify it against the manufacturer’s NOA spec.
Entry & Swing Doors
On Davie’s original ranch homes, the front door is usually a wood unit that has spent four decades swelling and contracting under South Florida humidity. The frame is often out of square by the time we arrive. We replace it with an impact-rated entry door from PGT or CGI, fusion-welded and flashed to keep wind-driven rain from ever touching the jamb. For Davie, we recommend fiberglass or steel impact doors over wood: they hold their shape in 90% humidity and they don’t delaminate after three wet seasons.

Double & French Doors
French doors are common on Davie’s equestrian estates, usually leading from the family room to a patio or pool deck. The older ones are almost always non-impact, single-pane, and held together by corroded aluminum frames. We tear out the entire assembly and set a new impact-rated double door system. On a 1970s CBS ranch off Flamingo Road in Davie’s equestrian district, we pulled a pair of French doors that had rotted the interior flooring at the threshold. The homeowner assumed a simple reglaze would work. It would not have met Broward County code, and no insurer would have accepted it.

Bifold & Folding Doors
Bifold and folding door systems are increasingly common in Davie for homeowners who want wide openings to patios, pastures, or canal views. These are never off-the-shelf jobs here. Davie ranch layouts often include sliding door openings that are 8 to 10 inches wider than any stock unit. We measure, order a custom-sized HVHZ-certified system, and install it on a schedule set by the manufacturer’s lead time, not our labor calendar. On one Davie job, the original rough opening was 8 inches wider than any stock NOA unit. We ordered a custom 3-panel impact bifold from ES Windows, set a fusion-welded frame with flashing tape, and the lead time was nine weeks. The price? Fixed in writing before we ordered.

Pivot Doors
Pivot doors are a newer option we’re installing on Davie’s higher-end custom homes and renovated ranches. They’re heavier than a standard hinged door, often using a floor-mounted pivot hinge and a steel-reinforced frame. In Davie, a pivot door must still meet HVHZ impact requirements, which means the manufacturer needs to have a Miami-Dade NOA for the specific door slab and frame. We only install pivot doors from manufacturers who do, and we register both warranty layers on them the same as we would any other door.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Davie
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Davie homes in the HVHZ, we lean on brands with proven Miami-Dade/Broward NOA compliance. PGT and CGI are the two we quote most often for impact-rated entry and sliding doors. ES Windows comes up for custom bifold and folding systems, especially on equestrian estates where the rough opening is non-standard. Because we quote these lines side by side on paper, you see the actual cost difference between a PGT impact slider and a CGI unit before you commit. We also stock common replacement hardware and weatherstripping for major brands, which shortens turnaround on service calls in Davie.
Common Door Installation Problems We See in Davie Homes
These are the failure modes we walk into most often on Davie job sites. If any of them sound familiar, call us. The fix is usually a full replacement, not a patch.
- Wind-driven rain intrusion around aging aluminum frames. Davie sits in Broward County’s inland corridor, exposed to the afternoon thunderstorms that funnel off the Everglades. Water gets driven sideways into door frames, swells the jamb, and rots the interior flooring before the homeowner even sees a stain.
- Fog or condensation in original single-pane sliders. These are not failed insulated glass units. They were never insulated to begin with, and they carry no impact rating. Homeowners call thinking a pane can be reglazed. Broward County won’t permit it.
- Insurance and sale-blocking non-impact doors. You can’t obtain or renew a homeowners policy on a Davie home with a jalousie or non-impact door that lacks a Miami-Dade NOA. We often get calls from homeowners 30 days from closing who need a full permitted replacement before the sale can proceed.
- Non-standard rough openings on ranch and equestrian homes. Original Davie sliding doors from the 1960s and 1970s were installed at whatever rough opening the builder framed that week. That’s why the replacement units almost never match stock sizes. We measure every opening twice and order custom-sized HVHZ units to fit.
Pricing for Door Installation in Davie, FL
In Davie, a standard impact-rated entry door replacement typically runs $2,800 to $5,500 installed, depending on the brand and whether the existing frame can be reused. A full-frame tear-out on an original jalousie or single-pane slider runs higher, usually $4,000 to $8,500 for a single impact slider. Custom bifold or folding door systems are the top tier: $9,000 to $18,000 in Davie, driven by the opening width, the NOA-certified manufacturer, and lead time rather than labor. French door replacements land between $4,500 and $9,000. Every quote is fixed in writing before any component is ordered, and we register both warranty layers on the same day. Call (863) 208-6105 for a free estimate with no change orders later.
We Also Serve Cities Near Davie
Our crews serve Door Installation in Davie and the surrounding Broward communities. If you’re in Pembroke Pines, Miramar, Weston, or Southwest Ranches, the same crew, the same written quote process, and the same Done Right Promise apply. Dispatch and scheduling are coordinated from our Miami (South FL) office; the technicians who work on your door are local to South Florida and know the HVHZ code as well as we do.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Davie
Because your original door predates Broward County’s High-Velocity Hurricane Zone code, and it carries no Miami-Dade/Broward Notice of Acceptance. Davie’s 1960s and 1970s ranch homes were built with aluminum jalousie and single-pane slider units that cannot be reglazed, retrofitted, or panel-swapped under current permitting. The job is a full permitted tear-out to an impact-rated unit. Call (863) 208-6105 to get the exact scope for your opening.
Lead time for a custom impact door in Davie runs 6 to 12 weeks, and it’s set by the manufacturer, not our crew. Non-standard rough openings on older ranch homes require custom-sized units from PGT, CGI, or ES Windows, and those are built to order. We fix your price in writing before ordering, so the only variable is the calendar. Call (863) 208-6105 and we’ll tell you the current lead time for your exact door.
In most cases, no. Broward County’s HVHZ code requires the entire door assembly, including the frame, to carry a Miami-Dade NOA. A wood door from the 1970s almost never has that certification, and adding a storm panel or shutter does not satisfy the code for an exterior door on a Davie home. We recommend a full replacement with an impact-rated fiberglass or steel unit designed for the HVHZ. Call (863) 208-6105 for a free assessment.
Because the rough openings were framed by builders in the 1960s and 1970s to whatever dimension was handy that week. We regularly measure Davie openings that are 8 to 10 inches wider than any stock NOA unit available. That’s why we measure every opening twice and order custom-sized impact sliders or bifolds, with the price fixed in writing before we order. Call (863) 208-6105 to get a true rough-opening measurement on your home.
A properly installed HVHZ-rated bifold outperforms an old non-impact slider, but it’s not inherently stronger than an impact slider. Both must carry a Miami-Dade NOA for the entire assembly, including the frame. The difference in Davie is that bifolds are almost always custom-built for a non-standard opening, so the rough opening gets fully reframed and flashed during installation, which is often overdue on a 50-year-old ranch. Call (863) 208-6105 for a written quote comparing both options for your opening.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Davie since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After