Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Impact Windows in Pembroke Pines: What to Know First
TruePane Windows & Doors provides independent Therma-Tru impact window service and replacement throughout Pembroke Pines, with most jobs completed in a single visit. We quote Therma-Tru work honestly: if your frames are sound, we repair them. If the sash or glass is beyond saving, we tell you that plainly and price a replacement before we touch a tool. Call (863) 208-6105 and you will get a live person, not a voicemail tree.
This page is for Pembroke Pines homeowners who bought Therma-Tru entry doors, sidelites, or door glass years ago and are now asking two questions: can this be brought up to modern impact code, and will the next repair actually hold. We answer both, specifically.
How Therma-Tru Products Fail - and How We Fix Them
- Fiberglass door slabs bowing at the hinge stile (Classic-Craft and Fiber-Classic lines). Therma-Tru fiberglass doors are solid products, but twenty years of South Florida humidity and afternoon sun on a west-facing entry in Pembroke Pines can warp the slab just enough that the sash drops and the corners lose seal. Most shops quote a whole new door. We measure the reveal, shim the hinges, and reset the threshold so the door swings true again. If the slab itself is twisted beyond correction, we say so and quote a new Therma-Tru or an alternate impact-rated slab side by side.
- Factory door glass inserts losing their seal, fogging between panes (Smooth-Star and Classic-Craft decorative glass). The Therma-Tru glass insert is a sealed unit inside a frame that was never designed to be field-glazed. When the seal fails and condensation clouds the glass, owners assume they need a whole new door. In most cases we replace the insert with an impact-rated glazing pack that fits the existing door frame. The door stays, the glass gets upgraded, and the job takes one visit.
- Sidelites and transoms that were never impact-rated, sitting in frames too narrow for a standard impact unit. This is common in Pembroke Pines homes built before the 2002 Florida Building Code changes. The opening is 8 or 10 inches wide, but a code-compliant impact sidelite needs framing depth that was never there. We will not notch a stud to make a window fit. We reframe the opening to accept a proper impact unit and pull the permit, because an out-of-true opening voids the manufacturer warranty before the truck leaves.
- Rot at the sill and bottom rail on older Therma-Tru door frames, especially at the threshold. Sprinkler overspray and monsoonal rain in Pembroke Pines find their way into the bottom corners of a door frame that was never properly flashed. By the time the homeowner notices, the rot has usually spread into the subfloor. We cut out the bad wood, flash the rough opening correctly, and reset the frame on a bed of sealant so water sheds away from the opening instead of through it.
- Out-of-square openings from foundation settling that make a new Therma-Tru unit bind. Western Broward County sits on soil that moves with the wet-dry cycle. A door installed square ten years ago can be binding at the latch by year twelve because the slab shifted. We measure corner to corner on every opening before we order anything. Then we true the frame to the opening, not the other way around.
Our Therma-Tru Impact Windows Process
- 1
You call (863) 208-6105. A live person answers, asks what the door or window is doing, and schedules a time that works. No callbacks, no forms.
- 2
We measure everything twice. Width, height, diagonal at both corners, reveal at the hinge stile, and the depth of the rough opening. Dale Kessler learned the habit at McFatter Technical College in Davie and still does it thirty years later.
- 3
We show you the options on paper. OEM Therma-Tru parts where they make sense, quality aftermarket impact glazing where they do not. Prices side by side, with the warranty duration stated in writing for each.
- 4
We do the work in one visit. Background-checked, uniformed technicians set the sash, bed the glass, flash the opening, and true the frame. Cleanup happens before we leave.
- 5
We test it together. Open, close, lock, check the reveal. You watch. If something is off, it gets corrected before we roll up the drop cloths.
- 6
We register both warranty layers before the truck leaves the driveway. The Keystone Standard means the manufacturer warranty and our workmanship guarantee are in writing, with durations stated, not buried in a brochure.
What Therma-Tru Impact Windows Costs in Pembroke Pines
Therma-Tru impact window work in Pembroke Pines runs on a range depending on what is actually wrong. A glass insert replacement for a fogged or cracked Therma-Tru door runs roughly $450 to $900 installed, depending on the glass pack and whether the frame needs any correction. A full impact-rated replacement door with Therma-Tru or an equivalent fiberglass slab runs $2,400 to $5,200, including the slab, impact glazing, hinges, hardware, and installation. Sidelite reframing jobs run $800 to $1,800 per opening because the rough opening usually needs to be rebuilt to code.
What moves the price: the width of the opening, whether the frame is out of square, whether we are pulling a permit, and whether the existing Therma-Tru slab can be salvaged or needs replacement. Our quote is line-itemed and fixed. No surprise charges at the end. Call (863) 208-6105 for a free estimate on your specific opening.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We are a Pembroke Pines company, founded by Dale Kessler in 2008, carrying a glazier tradition that goes back many years. We have repaired and replaced Therma-Tru doors in Pembroke Falls, SilverLakes, Chapel Trail, and the older sections west of University Drive. If a Therma-Tru part is backordered, we can quote PGT, CGI, CWS, or ES Windows as alternate lines without making you chase another contractor. Every job carries the Done Right Promise and The Keystone Standard. If the pane is not true, the job is not done.
We stand behind it. A square deal, in writing, with a company that plans to be in Pembroke Pines in thirty years. Call (863) 208-6105 and we will be there when we say.
FAQs
Can you replace just the glass in my Therma-Tru door, or do I need a whole new door? In most cases we can replace just the glass insert with an impact-rated glazing pack without replacing the door slab or frame, as long as the slab itself is not warped and the frame is square. We will measure and tell you which way it goes before we quote anything. Call (863) 208-6105 for a free assessment.
Will repairing my Therma-Tru door void the manufacturer warranty? As an independent Therma-Tru service provider, we follow manufacturer installation guidelines and register both warranty layers in writing. If a repair is done correctly and documented, it does not void the warranty. If the door is out of square and we replace it, the warranty is registered before the truck leaves your driveway.
How much does a Therma-Tru impact glass replacement cost in Pembroke Pines? Most Therma-Tru glass insert replacements run between $450 and $900 installed, depending on the glass pack and whether the frame needs correcting. Full impact-rated door replacements run $2,400 to $5,200. Call (863) 208-6105 for a written line-item quote.
Do you pull permits for Therma-Tru impact window work in Pembroke Pines? When the job requires reframing or a structural opening change, yes, we pull the permit and get the inspection passed. For direct glass insert swaps that do not alter the opening, a permit is generally not required. We tell you which applies to your job before we start.
How fast can you get to my Therma-Tru door in Pembroke Pines? A live person answers the phone around the clock, and most Therma-Tru glass replacements and door service calls are completed in a single visit. We schedule for the time that works and we show up prepared. Call (863) 208-6105 to schedule.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After