Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Custom & Geometric Windows in Pembroke Pines: What to Know First
We service and replace ECO Window Systems custom and geometric windows throughout Pembroke Pines, and most repair jobs are completed in one visit with the parts on the truck. You won’t get a bait price from us: we quote the real number up front, in writing, and we register both warranty layers before we leave your driveway. If you own an arched picture window, a radius casement, or a builder-grade ECO slider that’s gone foggy in a Pembroke Falls or SilverLakes home, call (863) 208-6105 and a live person will answer. This page is for homeowners who bought ECO windows, live with them daily, and want straight answers about what fails, what it costs, and who in South Florida actually knows how to work on them.
Key Takeaways:
- We’re an independent ECO Window Systems service provider in Pembroke Pines, not a factory rep and not a franchise sheet.
- Most ECO custom and geometric window repairs finish in a single visit, assuming standard hardware and glass sizes.
- Free estimates, no change orders, and the Done Right Promise on every job. Call (863) 208-6105.
How ECO Window Systems Products Fail - and How We Fix Them
ECO Window Systems built a solid mid-range line for the Florida market, especially in the custom and impact categories. But every window line has its habits. Here’s what we actually see in Pembroke Pines homes, series by series.
- ECO 5500 Series single-hung and picture windows: fogged glass units on custom trapezoids and radius tops. The insulated glass seal breaks down faster on shaped units because the spacer bar has to follow curved geometry. South Florida humidity in SilverLakes and Chapel Trail accelerates the creep. We measure the exact radius, order the replacement IGU to the curve, and set it once.
- ECO Impact Series casements and fixed lites: sagging hinge posts on oversized geometric openings. Big shaped openings, think eyebrow transoms over sliders, put the hinge side of the casement under constant load. If the frame wasn’t shimmed dead-level during original install, the sash settles and won’t close flush. We pull the sash, re-shim the jamb to true, and reset the hardware. The glass rarely needs replacing on these, it’s a frame and hinge correction.
- ECO Builder Series horizontal sliders: track wear on custom-width units in Pembroke Falls. These were a volume product used heavily by track builders. On custom-width sliders wider than 72 inches, the roller assemblies wear unevenly because the outer tracks carry more glass weight. Homeowners assume they need a new door; they need new tandem roller assemblies, and we keep those on the truck.
- ECO aluminum frame patio and pocket sliders: out-of-square openings after years of heat cycling. Aluminum expands and contracts with Pembroke Pines daytime heat. On pocket sliders in older homes west of Flamingo Road, the header can drift slightly, and the panel starts dragging. We check the reveal with a laser, adjust the header shim pack, and re-square the track. It’s a care issue, not a replacement issue, unless the track is worn through.
- ECO custom arched windows in stucco openings: frame-to-stucco gap letting in hot humid air. Arched units were sometimes set with minimal perimeter sealant because the original installer rushed the curve. You’ll feel a warm spot near the inside corner in summer. We cut out the old bead, backer-rod the gap to the right depth, and run a continuous tooled bead that gives instead of cracking in the next July swell.
Our ECO Window Systems Custom & Geometric Windows Process
Every ECO job follows the same path, and there isn’t a step where we rush the clock. Here’s what a custom or geometric window service call in Pembroke Pines looks like.
- 1
You call (863) 208-6105. A live person answers, asks about the window type and what you’re seeing, and schedules the time. No automated tree, no callback waiting.
- 2
We measure the opening before we touch anything. Twice, as always. On shaped windows we take a full template, including the radius, the chord, and the jamb depth. If the original window was set out of square, we note that before we quote.
- 3
We tell you what’s actually wrong and whether we go OEM or quality aftermarket. If it’s a warranty-covered part and ECO still stocks it, we use OEM. If lead time is three months or the part’s been discontinued, we tell you that plainly and quote a quality aftermarket option that matches the original profile.
- 4
We do the work in one visit when possible. Standard glass, track hardware, and hinge corrections finish same day. Specialty IGU radius orders take the time they take, and we tell you that date before we order.
- 5
We test before we pack the truck. The sash opens and closes ten times. We check the reveal. We run a hand over the sealant bead. If the pane is not true, the job is not done.
- 6
We register both warranty layers in writing and hand you the paperwork. Not an email you have to chase down later. Paper in hand, durations stated, before we leave the driveway.
What ECO Window Systems Custom & Geometric Windows Costs in Pembroke Pines
Here are the working numbers for Pembroke Pines ECO jobs, based on what we’ve quoted in this market over the last few years. These are ranges, not internet guesses.
| Job Type | Typical Range | Notes |
|---|---|---|
| Replace fogged IGU, standard rectangle | $185-$350 | In-service, single unit |
| Replace fogged IGU, custom arched/radius | $350-$700 | Template cut, longer lead |
| Slider roller assembly replacement | $140-$280 | Per panel, tandem rollers |
| Casement hinge and jamb re-shim | $200-$450 | When sash is salvageable |
| Full frame perimeter re-seal, arched unit | $150-$400 | Cut, backer rod, continuous bead |
| Custom geometric window replacement (full unit) | $1,200-$3,800 | Depends on size, impact rating, frame |
What moves the price is access, and whether the frame itself is still true. A third-floor arched eyebrow over a foyer costs more than a first-floor trapezoid over a garden window, because of ladder work and template risk. If the treatment calls for it, we’ll quote manufacturer lines side by side on paper, and there’s a standing 5% discount for seniors and veterans and a free written repair estimate. Call (863) 208-6105 for an exact number. Estimates are free, and the number we quote is the number on the bill.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We didn’t start yesterday, and we didn’t buy our way into this business. Dale Kessler grew up in Pembroke Falls and learned the trade at McFatter Technical College in Davie, and he still runs the company the way his instructor taught him: a window is only as good as the frame holding it. That’s why every ECO job we take in Pembroke Pines starts with measuring, not with selling. We’re background-checked, uniformed, and trained to work on more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, so we can tell you honestly how ECO compares to what else is available after a hurricane or a hard summer. And every job carries the Done Right Promise. If it’s not done right, we fix it, no paperwork, no arguing. If it is not in writing, it is not a guarantee – it is a guess. We’ve been in this town many years, and we plan to be here in thirty more.
FAQs
It depends on the ECO warranty language and whether the specific part is still covered. As an independent ECO Window Systems service provider, we document everything and match the original work to manufacturer spec. If your window is still within warranty and ECO will cover the part, we’ll work with you on the claim. If it won’t, we’ll tell you before we order anything.
Yes, because we template every shaped unit ourselves. Arched, eyebrow, trapezoid, half-round, cathedral top, parallelogram, we measure the radius, the chord, the frame depth, and the glass make-up before we quote. Then we quote it on paper so you see the number before the order goes in. Call (863) 208-6105 for a free estimate on your shaped window.
Most standard ECO glass and hardware jobs finish in one visit. A custom arched IGU usually takes two to four weeks from template to install, because the unit is cut to the curve, not pulled off a shelf. We’ll give you a hard date before we order, and we’ll be there when we say.
We fix the jobs other companies gave up on. Out-of-square frames, curved glass, oversized openings that settled, and shape-specific hardware issues. If the pane cannot be made true, we’ll tell you honestly and quote the replacement. We won’t paper over a frame problem with fresh sealant and call it a repair.
Most repairs run between $140 and $700, depending on whether it’s a roller assembly, a fogged IGU, a hinge re-shim, or a full perimeter re-seal. A full custom replacement is a different animal and runs $1,200 to $3,800 or more based on size and impact rating. Call (863) 208-6105 for an exact quote, and remember, the number we give you is the number on the bill.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.