Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Shingle, Tile & Metal Roofing in Pembroke Pines: What to Know First
We provide independent ES Windows shingle, tile and metal roofing repair and replacement in Pembroke Pines, with most window-to-roof integration issues diagnosed and corrected in a single visit. The honest price posture is this: a proper ES Windows integration repair typically runs $250 to $900, while full replacements involving structural framing or roofing interface work commonly land between $1,400 and $6,000 depending on the window series and what the roof is doing to the frame. If you own ES Windows and your shingle, tile or metal roof is leaking around them, warping the frames, or trapping water against the sills, this page will tell you what’s actually happening and what it takes to fix it right. Call (863) 208-6105 and a live person answers, day or night.
Key Takeaways:
- ES Windows failures in Pembroke Pines rarely start at the glass. They start at the roof-to-frame interface, where shingle, tile and metal roofing details either shed water correctly or drive it into the buck.
- We are an independent ES Windows service provider. We do not represent the manufacturer, and we do not need to. We fix what fails.
- Every job gets both warranty layers registered in writing, durations stated, before our truck leaves your driveway.
How ES Windows Products Fail - and How We Fix Them
Dale Kessler has spent the better part of three decades setting glass in South Florida homes, and the pattern with ES Windows in Pembroke Pines is consistent: the window itself holds up, but the interface with shingle, tile or metal roofing does not. Here are the five failure modes we see most often.
- ES Vista Series and tile roof kickouts. Concrete and clay tile roofs in Pembroke Pines push water hard against the top flange of the frame. The original flashing, often a thin peel-and-stick membrane, fails after eight to ten years of South Florida sun and thermal cycling. We pull the first course of tile, inspect what’s left, and rebuild the kickout with metal that actually laps over the frame, not under it.
- ES Impact Series direct-set frames and metal roof expansion. Standing seam and corrugated metal roofs expand and contract enough in Florida heat that a rigidly sealed window frame starts to shear at the corners. The symptom is a window that suddenly binds or a hairline crack at the sill. The fix is a compliant sealant joint, sized for the actual movement of that specific roof, not whatever was on the truck.
- ES Architectural Series and shingle-roof wicking. Shingle overhang that dies too close to the top of the frame allows capillary action to pull water up and into the rough opening. Homeowners see staining along the interior drywall above the window and assume the window leaked. It did not. The roof detail did. We correct the overhang and add a metal drip cap that sheds water before it can climb.
- ES Colonial double-hungs and clogged weep paths. With heavy Pembroke Pines rain, shingle debris and tile grit wash down the roof and clog the weep channels at the sill. Water pools inside the frame, the seals degrade, and the sash tracks corrode. We clear the paths, replace the worn balance hardware, and show you exactly which roof runoff pattern is causing it.
- ES Picture and fixed units with failed sealant joints at the jambs. When roofing crews re-flash around fixed windows during a re-roof, the sealant they use often is not rated for the frame material. It fails within two seasons. Water runs down the jamb, rots the buck, and you get that musty smell near the baseboard. We strip the wrong sealant, repair or replace the buck, and re-seal with material matched to the ES frame spec.
Our ES Windows Shingle, Tile & Metal Roofing Process
Here is how a real ES Windows job goes from first call to final walkthrough at TruePane Windows & Doors.
- 1
Call and talk to a person. You explain what you’re seeing. We ask about the roof type, the window location, and when the problem started. No forms, no hold music.
- 2
On-site measurement and diagnosis. A background-checked, uniformed technician comes out, measures every opening twice, and identifies whether the failure is in the window, the roof interface, or both.
- 3
Written line-item proposal. We quote OEM parts alongside quality aftermarket equivalents on paper, with prices and warranty durations stated for each. You decide. We do not decide for you.
- 4
The repair or replacement. We remove and replace only what needs it. Roofing details get rebuilt correctly, not patched over. ES frame tolerances are respected.
- 5
Testing and registration. We water-test the opening, confirm operation, and register both manufacturer warranty layers in writing before the truck leaves the driveway.
- 6
The Done Right Promise. If something is not right, we come back and make it right. No paperwork fights, no arguing. That is the standard.
What ES Windows Shingle, Tile & Metal Roofing Costs in Pembroke Pines
Here are real numbers for the ES Windows scenarios we see in Pembroke Pines. These are ranges, not quotes. Your exact price depends on what we find when we open it up.
| Service | Typical Range |
|---|---|
| Flashing rebuild at window-to-roof interface (single window) | $250 - $600 |
| Weep path clearing and sill re-seal | $150 - $350 |
| Buck repair with new jamb seals (per jamb) | $400 - $900 |
| Full ES window replacement with roof interface correction | $1,400 - $6,000 |
| Multi-window re-flash after re-roof | $2,000 - $10,000 |
What moves the price: whether the roof is tile, shingle or metal, the height of the window, the condition of the rough opening, and whether we are matching OEM ES parts or using a quality aftermarket equivalent. We give you both options in writing. Call (863) 208-6105 for a free estimate, and you will see every number on paper before any work starts.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for ES Windows Work
We have been serving Pembroke Pines and western Broward County since 2008, and the founding rule has not changed since Dale Kessler learned it from his father’s glass shop: if the pane is not true, the job is not done. We are an independent ES Windows service provider, which means we do not answer to the manufacturer’s sales targets. We answer to you. Our technicians know ES Windows, but they also know PGT, CGI, CWS and ECO Window Systems, so when we tell you what is failing, we are comparing it against the full landscape of what holds up in Florida, not just one product line. A live person answers the phone 24 hours a day, 7 days a week, and every job is backed by the Done Right Promise. We stand behind it. In writing.
FAQs
No. As an independent ES Windows service provider, we work in a way that preserves the manufacturer warranty. We use OEM parts when requested and register both warranty layers in writing, durations stated, before we leave. If a warranty is still active, we will show you exactly what is covered and what is not. Call (863) 208-6105 and we will walk you through your specific situation.
Most single-window flashing and seal repairs are completed in one visit, typically two to four hours depending on the roof type and access. Full replacements with buck repair may take one to two days. We will be there when we say, and the schedule is set before the work begins. Call (863) 208-6105 for a timeline on your specific job.
Both are available. We quote OEM ES parts and quality aftermarket equivalents side by side on paper, with prices and warranty durations stated for each. You choose what you are comfortable with, and we install it to the same standard. Call (863) 208-6105 to discuss your window and what makes sense.
If the frame is sound and the failure is at the roof interface, repair is usually the right call and costs less. If the frame shows corrosion, the seals are compromised, or the glass has shifted, replacement is the better investment. We will tell you which one you actually need before we ever quote you what you might want to spend. Call (863) 208-6105 for a straight answer.
Yes. We correct window-to-roof details on shingle, tile and metal roofing throughout Pembroke Pines. Each roof type fails differently, and we fix the specific failure, not a generic one. Call (863) 208-6105 to schedule a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After