Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Custom & Geometric Windows in Pembroke Pines: What to Know First
CWS custom and geometric windows in Pembroke Pines are specialty units, and TruePane Windows & Doors installs, replaces, and services them as an independent CWS service provider. Most CWS custom and geometric window jobs in Pembroke Pines take one to two visits, depending on whether the sash, frame, or glazing needs work. Expect honest, line-item pricing before we touch the opening, because if it is not in writing, it is not a guarantee - it is a guess.
This page is for homeowners in Pembroke Pines, Miramar, Weston, and the western Broward communities who own CWS windows with arched tops, radius corners, trapezoids, or oversized openings and need a glazier who knows how those shapes behave in South Florida heat and humidity. If you have a CWS geometric window that is fogged, binding, or leaking, call (863) 208-6105. A live person answers.
How CWS Products Fail - and How We Fix Them
- CWS Arched and Radius Units: Seal Failure at the Apex. Curved glass puts constant stress on the seal at the highest point of the arch. After eight to twelve years in Pembroke Pines sun, the butyl seal at the apex weakens and the insulated glass unit starts to fog. We see this on CWS casement and fixed arch units throughout Pembroke Falls and SilverLakes. The fix is a new IGU cut to the exact radius, not a caulk smear over the old seal.
- CWS Geometric Shapes: Frame Racking on Trapezoids and Triangles. Odd-angle frames carry weight unevenly, and in Pembroke Pines, where afternoon thunderstorms swing humidity fast, an out-of-square rough opening magnifies the problem. A CWS trapezoid window that binds in the upper corner is usually racked because the original installer shimmed it wrong. We remove, re-square, and reset the frame before the glass goes back in.
- CWS Oversized Picture Windows: Glazing Bead Shrinkage. On wide fixed units, the vinyl glazing bead shrinks over time and pulls away at the corners, letting water sit against the glass edge. We replace the bead with a matching profile and re-bed the IGU so the drainage channels work the way CWS designed them.
- CWS Impact Geometric Units: Gasket Compression Loss. Impact-rated shaped windows rely on a compression gasket around the entire perimeter. After years of thermal cycling, the gasket hardens and loses memory, especially on south-facing walls in Pembroke Pines. A window that whistles in a storm but tests fine for impact usually needs a new gasket set, not a new window.
- CWS Custom Casements with Arched Tops: Hinge Sag. When a casement carries a curved top sash, the extra weight above the hinge line accelerates wear on the lower pivot. We rebuild the hinge pocket and rehang the sash so it swings true, because a window that does not close square will not seal square.
Our CWS Custom & Geometric Windows Process
- 1
We measure the opening twice. Every CWS geometric opening gets measured at multiple points. An arch is not a rectangle, and a wrong radius means a re-order and a boarded-up window.
- 2
We diagnose before we quote. We determine whether the issue is the IGU, the frame, the hardware, or the flashing. The fix follows the cause, not the other way around.
- 3
We source the right parts. For CWS units still under a valid factory warranty, we use OEM parts so the warranty stays intact. For out-of-warranty units, we compare OEM and quality aftermarket options side by side on paper, with prices, so you decide with your eyes open.
- 4
We do the repair or replacement. Uniformed, background-checked technicians set the glass, rebuild the frame, or rehang the sash. Most CWS custom and geometric window jobs are completed in a single visit.
- 5
We test, clean up, and write it all down. We operate the window through its full range, check the drainage, and leave you with the warranty paperwork registered, duration stated, before the truck leaves the driveway.
What CWS Custom & Geometric Windows Costs in Pembroke Pines
Here is what we see across Pembroke Pines for CWS-shaped and oversized window work:
- Replacement IGU for a CWS arched or radius unit: $400 to $900 installed, depending on glass package and size.
- Full CWS geometric window rebuild, including frame re-squaring and new gaskets: $800 to $1,600.
- Custom replacement CWS trapezoid or triangle window, impact-rated: $1,200 to $3,200.
- Oversized CWS picture window replacement with new IGUs: $1,800 to $4,500.
What moves the price: low-E or impact glass, true custom radii, second-story access, and whether the existing frame can be saved. We give you the number before we start, not after. Call (863) 208-6105 for a free estimate on your specific opening.
Why Pembroke Pines Homeowners Call TruePane Windows & Doors for CWS Work
Dale Kessler grew up in Pembroke Falls, and he has spent the better part of three decades measuring, fitting, and setting glass in South Florida homes. We treat every CWS geometric window job as a craft commitment, not a transaction. Our Done Right Promise means if the work is not right, we make it right, no paperwork fights and no arguing. We register both manufacturer warranty layers in writing before we leave the driveway, and we install and service more than a dozen lines, so if a CWS unit is beyond saving, we can quote PGT, CGI, ES Windows, and ECO Window Systems side by side on paper. You see exactly what you are buying and what it costs. A live person answers the phone 24 hours a day, 7 days a week. No voicemail tree.
FAQs
Yes. Many CWS radius and shaped units use standard glazing components still available through glass fabricators that serve the South Florida market. We match the profile, the radius, and the glass package. For units under warranty, we source OEM so the factory coverage stays valid.
If the frame is square and the seal is the only failure, a replacement IGU is the right fix and costs less than half of a full replacement. If the frame is racked or the gaskets are shot, replacing the whole unit makes more sense. We will show you both numbers before you decide. Call (863) 208-6105 and we will walk you through it.
No. We quote a fixed price before we begin. If we find something behind the wall that changes the scope, we stop and talk to you first. No surprise line items on the bill, ever.
Custom geometric IGUs typically take three to five weeks from our glass fabricators, depending on the shape and glass package. Standard arched and radius sizes sometimes come faster. We will give you a real timeline when we quote, and we will be there when we say.
When a permit is required, yes. We pull it, schedule the inspection, and stand behind the work through sign-off. Impact-rated replacements in Pembroke Pines have code requirements, and we handle that end of the job so the paperwork is as right as the glass.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.