French & Double Doors

French & Double Doors in Pembroke Pines, FL | TruePane Windows & Doors

French and double doors change how a Pembroke Pines home connects to the outside. Instead of one narrow opening, you get a wide, symmetrical passage onto a patio, lanai, or pool deck. But in South Florida, a beautiful door that can’t survive hurricane season is a liability. TruePane Windows & Doors installs paired impact-rated French doors with laminated glass in every lite, multi-point locking hardware, and Miami-Dade NOA compliance for configurations matched to your wind zone. We’re a Pembroke Pines-based installer working with PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. Call (863) 208-6105 to discuss your opening.

Call (863) 208-6105

Product Overview - French & Double Doors

The defining feature of this impact series is lamination in every single lite, not just the door panel. Each glass section carries a polyvinyl butyral (PVB) interlayer engineered to hold the glass in the frame under impact. On a French door with divided lites, that means no weak point where a stray branch or roof tile finds untreated glass. The frame is built from aluminum or vinyl, paired with multi-point locking hardware that anchors at the top, bottom, and center of the active leaf. Those are the two things we look for first when quoting French doors in Pembroke Pines: full-lite laminated glass and hardware that engages the frame at multiple points rather than one deadbolt.

Architecturally, these doors suit Florida homes that lean on clean sightlines. The symmetrical design reads equally well on a contemporary stucco house in SilverLakes, a Mediterranean-style build in Chapel Trail, or a ranch in Pembroke Falls. They work as interior-to-exterior openings onto covered patios, pool decks, and backyards. What makes them practical for hurricane-prone construction is that they’re not an afterthought. Every component, from the sill to the interlocking astragal, is selected to function as one system when wind pressure hits. A door that looks right but isn’t rated for the opening won’t pass inspection in a High-Velocity Hurricane Zone. We make sure the configuration on your quote matches the actual wind load your house faces, nothing generic.

Technical Specifications

These are the build options we order and install for French and double door openings in Pembroke Pines. Sizes, glass packages, and finishes are confirmed per configuration because Miami-Dade NOA and Florida Product Approval numbers are issued per specific combination, not as a blanket rating.

• Frame materials: Aluminum or vinyl, selected by exposure and architectural need.
• Maximum width: Up to 96 inches for paired panel configurations.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass. Laminated impact glass is standard on these doors because every lite must hold under TAS 201 and TAS 202 conditions.
• Finish options: White, almond, bronze, black, tan. Powder-coated or factory-finish depending on frame line.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers, pulled per configuration and verified on your specific quote.
• Design pressure: Matched to your wind zone, up to +/-100, never higher. We don’t oversell a rating your home doesn’t need.

Hurricane & Compliance Performance

Laminated Impact Glass
A PVB interlayer sits between two panes of glass. Under impact, the glass may crack but the interlayer holds the pieces in the frame. That keeps wind, rain, and debris outside where they belong. Every lite on these French doors uses this lamination, including sidelites and transoms if your opening includes them.

Miami-Dade NOA / Florida Product Approval
Each approved configuration carries a Notice of Acceptance or Florida Product Approval number. We pull the correct number for your exact size, glass package, and frame when we prepare your quote. That documentation is what your permit reviewer in Pembroke Pines will look for.

FBC / HVHZ Compliance
These doors are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ means the product is built for Miami-Dade and Broward County conditions, including the wind zones that affect Pembroke Pines. It’s not a coastal rating applied loosely; it’s the code we build to here.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. When a French door carries Miami-Dade approval, this is the test sequence behind it.

Design Pressure Matched to Your Wind Zone
Design pressure for your opening is matched to the wind zone of your specific Pembroke Pines address, up to +/-100. That’s the honest way to spec a door. If your house sits in an interior tract with tree cover, you likely don’t need the same rating as a home on an exposed lakefront. We match the number to the need and never pad it.

Energy Performance Options
Low-E insulated glass is available for these doors. The Low-E coating reflects heat while the insulated airspace slows thermal transfer. Tinted glass cuts glare, which matters on a west-facing patio door in Pembroke Pines. Clear laminated glass gives you the truest view and is the simplest path to NOA compliance.

Color & Glass Options

Finish choice on a French door isn’t just aesthetic. White and almond read classic Florida and are the most common selections we see in Pembroke Pines communities like SilverLakes and Pembroke Falls. Bronze and black create contrast on stucco homes and hold up visually alongside dark window frames. Tan works well on Mediterranean elevations where the trim and roof tile carry earth tones. All five finishes are factory-applied on aluminum or vinyl, so fading and chalking are minimized compared to site painting.

Glass selection depends on what the door faces. Clear laminated impact glass is the straightforward choice for a shaded lanai opening. Low-E insulated glass is worth considering when the door gets direct afternoon sun, especially on west-facing rear walls. Tinted glass reduces glare without going so dark that the room feels dim. If you want one panes package that does impact and energy, Low-E insulated laminated is available on select configurations. We’ll walk through the trade-offs for your orientation and how you use the room before you commit.

Installation by TruePane Windows & Doors in Pembroke Pines

A NOA-rated French door installed poorly is just an expensive hole in your wall. The rating depends on the frame being anchored correctly, the perimeter sealed properly, and the product set level, plumb, and square. Our installation process starts with a pre-install inspection of the rough opening. We check the existing header, the condition of the buck or framing, and the substrate we’re fastening to. If there’s water damage or rot, we address it before the new door goes in. You can’t hide a bad rough opening behind a good door.

On install day, we set the frame level, plumb, and square, then shim and anchor to manufacturer spec. The perimeter gets AAMA 812 low-expansion foam sealant, and our installation practice follows AAMA 2400/2410 standards. After the door is hung and hardware is adjusted, we run a water test on the sill and threshold to check drainage. Then we clean up, haul debris, and leave the opening ready for trim or stucco patch. Pembroke Pines has HVHZ permitting requirements, and we’re familiar with the submittal process: NOA documentation, product approval numbers, and wind zone verification. We don’t skip steps because a failed inspection costs you a project delay. The goal is a door that passes inspection the first time and holds its rating for the life of the product.

Frequently Asked Questions - French & Double Doors

What wind zone or design pressure is the French & Double Doors rated for? Design pressure is matched to the wind zone of your Pembroke Pines address, up to +/-100, and confirmed on your specific quote. We don’t sell a higher rating than your house needs. Call (863) 208-6105 and we’ll check the wind zone for your street.

What is the lead time on a French & Double Doors order? Most configurations are ready for installation within a few weeks of order confirmation, depending on the manufacturer line and glass package. We confirm a delivery window when we submit your order. For a current lead time on your configuration, call (863) 208-6105.

Does my permit require a Miami-Dade NOA or Florida Product Approval submittal? Yes, in Pembroke Pines and throughout Broward County, your permit reviewer will ask for the NOA or Florida Product Approval number for your exact configuration. We pull that documentation when we prepare your quote and include it with the permit submittal. If you’re unsure what your project needs, call (863) 208-6105 and we’ll walk you through it.

Can I customize the size or configuration of the French doors? Up to a point. The paired panel system works within the tested configurations, with widths up to 96 inches. Sidelites and transoms are available on select lines, but every combination has to match a tested NOA configuration. We’ll tell you what’s possible for your opening and what configuration the code requires.

How do I maintain the frame and glass? Clean the frame with mild soap and water twice a year, and clear the sill track of sand and debris so drainage channels stay open. Inspect the weatherstripping and multi-point locking hardware seasonally. If a panel ever feels stiff or the lock doesn’t engage smoothly, call us before forcing it. Small adjustments now prevent damage later.

Get a Quote - French & Double Doors in Pembroke Pines

If you’re planning a French door replacement or sizing a new opening, we’ll measure the opening, confirm your wind zone, and quote the exact configuration with NOA documentation. Estimates are free. Call TruePane Windows & Doors in Pembroke Pines at (863) 208-6105 to schedule your on-site measurement and start your project.

Written by the team at TruePane Windows & Doors, serving Pembroke Pines, FL and surrounding Broward County communities.